The present work focuses on the stress-relief annealing (SRA) modification and porcelain firing (PF) treatment effect in biomedical Cobalt–Chromium (Co–Cr) components for dental applications components produced by the SLM process. The specimens’ phase transformation was examined by X-ray diffraction, optical microscopy, scanning and transmission electron microscopy, combined with energy dispersive X-ray spectroscopy. The corresponding mechanical properties were assessed by compression tests and Vickers hardness measurements. The matrix microstructure consisted mainly of the FCC γ phase with a small amount of the HCP-structured ϵ phase. SRA at 750°C and 950°C, followed by PF at the 930°C treatment, increased the percentage of the ϵ phase and caused the precipitation of fine carbides and intermetallic precipitates, thus improving the final mechanical properties.
KoutsoukisTZinelisSEliadesGSelective laser melting technique of Co-Cr dental alloys: a review of structure and properties and comparative analysis with other available techniques. Int J Prosthodont. 2015; 24:303–312.
2.
DikovaTSDzhendovDZHKatrevaIVStudy the precision of fixed partial dentures of Co-Cr alloys cast over 3D printed prototypes. Arch Mater Sci Eng. 2018; 90:25–32.
3.
RajanK.Phase transformations in a wrought Co-Cr-Mo-C alloy. Metall Mater Trans A. 1982; 13:1161–1166.
4.
ZhouYSunQDongXMicrostructure evolution and mechanical properties improvement of selective laser melted Co-Cr biomedical alloys during subsequent heat treatments. J Alloys Compd. 2020; 840:155664.
5.
KajimaYTakaichiAKittikundechaNEffect of heat-treatment temperature on microstructures and mechanical properties of Co-Cr-Mo alloys fabricated by selective laser melting. Mater Sci Eng A. 2018; 726:21–31.
6.
ZhouYNWeiWYanJZMicrostructures and metal-ceramic bond properties of Co-Cr biomedical alloys fabricated by selective laser melting and casting. Mater Sci Eng A. 2019; 759:594–602.
7.
TakaichiAKajimaYKittikundechaNEffect of heat treatment on the anisotropic microstructural and mechanical properties of Co-Cr-Mo alloys produced by selective laser melting. J Mech Behav Biomed Mater. 2020; 102:103496.
8.
SongCZhangMYangYMorphology and properties of CoCrMo parts fabricated by selective laser melting. Mater Sci Eng A Struct Mater Prop Microstruct Process. 2018; 713:206–213.
9.
SainiJSDowlingLTrimbleDMechanical properties of selective laser melted CoCr alloys: a review. J Mater Eng Perform. 2021; 30:8700–8714.
10.
LuYJWuSQGanYLMicrostructure, mechanical property and metal release of As-SLM CoCrW alloy under different solution treatment conditions. J Mech Behav Biomed Mater. 2016; 55:179–190.
11.
LeeSHTakahashiENomuraNEffect of heat treatment on microstructure and mechanical properties of Ni- and C-free Co-Cr-Mo alloys for medical applications. Mater Trans. 2008; 46:1790–1793.
12.
MengucciPBaruccaGGattoAEffects of thermal treatments on microstructure and mechanical properties of a Co–Cr–Mo–W biomedical alloy. J Mech Behav Biomed Mater. 2016; 60:106–117.
13.
ISO 22674(E). Dentistry-metallic materials for fixed and removable restorations and appliances. Geneva: International Organization for Standardization; 2006.
14.
LópezHFSaldivar-GarciaAJ.Martensitic transformation in a cast Co-Cr-Mo-C alloy. Metall Mater Trans A Phys Metall Mater Sci. 2008; 39:8–18.
15.
ManiARodriguezSLopezHF.Deformation induced FCC to HCP transformation in a Co-27 Cr5-Mo-0.05C alloy. Mater Sci Eng A Struct Mater Prop Microstruct Process. 2011; 528:3037–3043.
16.
WeiWZhouYNLiuWBMicrostructural characterization, mechanical properties, and corrosion resistance of dental Co-Cr-Mo-W alloys manufactured by selective laser melting. J Mater Eng Perform. 2018; 27:5312–5320.
17.
HassaniFZKetabchiMBruschiSEffects of carbide precipitation on the microstructural and tribological properties of Co-Cr-Mo-C medical implants after thermal treatment. J Mater Sci. 2016; 51:4495–4508.
18.
ZhouXWangDZLiuXH3D-imaging of selective laser melting defects in a Co-Cr-Mo alloy by synchrotron radiation micro-CT. Acta Mater. 2015; 98:1–16.
19.
ZangenehSLashgariHRSaghafiMEffect of isothermal aging on the microstructural evolution of Co-Cr-Mo–C alloy. Mater Sci Eng A. 2010; 527:6494–6500.
20.
LashgariHRZangenehSHasanabadiFMicrostructural evolution during isothermal aging and strain-induced transformation followed by isothermal aging in Co-Cr-Mo-C alloy: a comparative study. Mater Sci Eng A. 2010; 527:4082–4091.
21.
Turrubiates-EstradaRSalinas-RodriguezALopezHF.FCC to HCP transformation kinetics in a Co–27Cr–5Mo–0.23C alloy. J Mater Sci. 2011; 46:254–262.
22.
HuangPLopezHF.Athermal e-martensite in a Co-Cr-Mo alloy: grain size effects. Mater Lett. 1999; 39:249–253.
23.
LiuYWangHW.Toughening and dry sliding wear resistance of Co3Mo2Si alloys. Wear. 2013; 297:952–957.
24.
MinetaSNambaSYonedaTCarbide formation and dissolution in biomedical Co–Cr–Mo alloys with different carbon contents during solution treatment. Metall Mater Trans A. 2010; 41(8):2129–2213.
