A high oxygen content can lead to metallurgical defects such as holes and microcracks in the products of selective laser melting (SLM) that significantly reduce the density and mechanical properties of a denture. In this study, a batch of a Co–Cr alloy powder was subjected to forced oxidation. SLM was used to prepare specimens from the powder before and after the treatment for the performance tests. The results showed that Co–Cr alloy powders with oxygen contents 184 and 616 ppm could both achieve good shaping of the specimens under identical SLM conditions. There was no significant difference between the specimens in terms of fuselage morphology, microstructure, density, tensile strength, yield strength and hardness. However, the elongation of the alloy synthesised using the higher oxygen content powder was significantly lowered, but still higher than that required by the ASTM F75 Casting Standard of the United States.
LiH.Comparison of clinical application among Ni–Cr alloy containing titanium, Ni–Cr alloy, high-gold alloy porcelain teeth. Stomatology. 2011;31(10):612–614.
2.
LiY, ZhangB, HuangQ, . A preliminary study on properties of dental Co–Cr alloy formed by selective laser melting technique. J Oral Sci Res. 2012;28(8):815–817.
3.
LiuH, WangL, LengG, . Common defects and the causes of high-melting Co–Cr alloy casting holder. Chinese J Geriatr Dent. 2006;3(4):206–207.
4.
XuB, LiD, NingR.Application of 3D printing technology in field of oral implantation and its revolutionary influence on development of dental industry. China Med Devic Inform. 2015;21(08):13–18.
5.
WuL, ZhuH, GaiX, . Evaluation of the mechanical properties and porcelain bond strength of Co–Cr dental alloy fabricated by selective laser melting. J Prosthet Dent. 2014;111(I):51–55. doi: 10.1016/j.prosdent.2013.09.011
6.
ZhangQ, WuW, NingB.Evaluation on mechanical performance of 3D printing cobalt chromium alloy used in production of removable partial denture stent. Gen J Stomatology. 2016;3(1):87–89.
7.
VandenbrouckeB, KruthJP.Selective laser melting of biocompatible metals for rapid manufacturing of medical parts. Rapid Prototyp J. 2007;13 (4):196–203. doi: 10.1108/13552540710776142
8.
TakaichiA, NakamotoT, JokoN, . Microstructures and mechanical properties of Co29Cr6Mo alloy fabricated by selective laser melting process for dental applications. J Mech Behav Biomed Mater. 2013;21:67–76. doi: 10.1016/j.jmbbm.2013.01.021
9.
AveryanovaM, BertrandP, VerquinB.Manufacture of Co–Cr dental crowns and bridges by selective laser melting technology. Virtual Phys Prototyp. 2011;6 (3):179–185. doi: 10.1080/17452759.2011.619083
10.
JevremovicD, PuskarT, KosecB, . The analysis of the mechanical properties of F75 Co–Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial dentures (RPD). Metalurgija. 2012;51:171–174.
11.
HedbergYS, QianB, ShenZ, . Vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting. Dent Mater. 2014;30(5):525–534. doi: 10.1016/j.dental.2014.02.008
12.
XuT.Study on selective laser melting process and mechanical properties of Co–Cr alloy restorations. Huazhong Univ Sci Technol. 2013;(1):1–4.
13.
BetteridgeW.Cobalt and its alloy. Chichester: Halsted Press; 1982; 78:4–12.
14.
AshworthMA, BryanJC, JacobsMH, Microstructure and property relationships in hipped Stellite powders. Powder Metall. 1999;42(3):243–249. doi: 10.1179/003258999665585
15.
StephaneV.Combination fixed and removable prostheses using a CoCr alloy: a clinical report. J Prosthet Dent. 2006;96:100–103. doi: 10.1016/j.prosdent.2006.04.013
16.
YuW, XiaoZ, GaoC.Preparation of micro-spherical CoCrMoW alloy powder by atomization and Its SLM forming performance. Mater Sci Eng Powder Metall. 2017;22 (1):56–61.
17.
WangG.Study on microstructure and mechanical properties of ultrafine CoCrW alloy. J Taiyuan Univ Sci Technol. 2015;(1):28–38.
18.
JinH, ZhouX, ZhangL.Effects of lanthanum ion-implantation on microstructure of oxide film formed on Co–Cr alloy. J Rare Earths. 2008;26(3):406–409. doi: 10.1016/S1002-0721(08)60106-4
19.
KaraaliA, MirouhK, HamamdaS, . Effect of tungsten 0–8 wt.% on the oxidation of Co–Cr alloys. Comput Mater Sci. 2005;33:37–43. doi: 10.1016/j.commatsci.2004.12.025
20.
WuZ, XuS, LiN.Effect of solid phase transition on metal-porcelain matching of Co–Cr alloy. West China J Stomatology. 2011;29 (6):568–575.
21.
HuG, CaiX, RongY.Fundamentals of materials science. Shanghai: Shanghai Jiaotong University Press; 2010.
22.
ZhangY, ShangguanY.Research and development of powder superalloy. Powder Metall Ind. 2004;14 (6):30–43.
23.
ZhuangD.Failure analysis. Shanghai: East China University of Science and Engineering Press; 2004; 115–116.
24.
ZhangD, ZhongP, TaoC, Failure analysis. Beijing: National Defense Industry Press; 2004. p. 94–150.
25.
SongC, YangY, WangY.Cocrmo alloy laser selective melting process and its performance. Chin J Lasers. 2014;41 (6):0603001-1-8.
