In this paper, the microstructure and electrochemical behaviour of a transient liquid phase (TLP) bonding between Inconel 625 and 316L stainless steel with a Cu interlayer were investigated. The TLP bonding was performed at 1090°C and 1120°C for 30 and 60 min. For microstructural analysis, FESEM and TEM were used. To analyse the corrosion resistance, EIS and Potentiodynamic polarisation tests in 3.5% NaCl were performed on the joint. Microstructural analysis suggested the presence of Mo–Nb, Cr–Mo and Nb-rich precipitations in the diffusion affected zone (DAZ) in the Inconel 625 side and Mo–Nb and Mo-rich precipitates in the Cu interlayer. The EIS and potentiodynamic polarisation tests showed that the highest corrosion resistance was achieved for the 1120°C-30 min sample.
KourdaniADerakhshandeh-HaghighiR.Evaluating the properties of dissimilar metal welding between Inconel 625 and 316L stainless steel by applying different welding methods and consumables. Metall Mater Trans A. 2018; 49(4):1231–1243.
2.
RodriguezJHoeferKHaelsigAFunctionally graded SS 316L to Ni-based structures produced by 3D plasma metal deposition. Metals (Basel). 2019; 9(6):620.
3.
MoosavyHNAboutalebiM-RSeyedeinSHA solidification model for prediction of castability in the precipitation-strengthened nickel-based superalloys. J Mater Process Technol. 2013; 213(11):1875–1884.
4.
DokmeFKulekciMKEsmeU.Microstructural and mechanical characterization of dissimilar metal welding of Inconel 625 and AISI 316L. Metals (Basel). 2018; 8(10):797.
5.
MurrayDCCorbinSF.Determining the kinetics of transient liquid phase bonding (TLPB) of inconel 625/BNi-2 couples using differential scanning calorimetry. J Mater Process Technol. 2017; 248:92–102.
6.
KarimiMAShamanianMEnayatiMH.Microstructural and mechanical properties assessment of transient liquid phase bonding of CoCuFeMnNi high entropy alloy. Trans Nonferrous Met Soc China. 2021; 31(10):3063–3074.
7.
ArhamiFMirsalehiSESadeghianAThe joint properties of a high-chromium Ni-based superalloy made by diffusion brazing: microstructural evolution, corrosion resistance and mechanical behavior. J Manuf Process. 2019; 37:203–211.
8.
MirzaeiSBineshB.Microstructure evolution mechanism and corrosion behavior of transient liquid phase bonded 304L stainless steel. Met Mater Int Published online. 2020; 27:1–15.
9.
Standard AS.G59–97: standard test method for conducting potentiodynamic polarization resistance measurements. In: Annual book of ASTM standards. Oxford University Press; 2009:p. 237.
10.
ChenW-SWangC-YShiueR-K.Brazing Inconel 625 using the copper foil. Metall Mater Trans A. 2013; 44(13):5724–5731.
11.
MoffattWGWestbrookJH.The handbook of binary phase diagrams. Corporate. NY: General Electric Co; 1976.
12.
PadronTKhanTIKabirMJ.Modelling the transient liquid phase bonding behaviour of a duplex stainless steel using copper interlayers. Mater Sci Eng A. 2004; 385(1-2):220–228.
13.
GhasemiAPouranvariM.Fast isothermal solidification during transient liquid phase bonding of a nickel alloy using pure copper filler metal: solubility vs diffusivity. Metall Mater Trans A. 2019; 50(5):2235–2245.
14.
ZhouXDongYLiuCTransient liquid phase bonding of CLAM/CLAM steels with Ni-based amorphous foil as the interlayer. Mater Des. 2015; 88:1321–1325.
15.
FarhadianAAssar KashaniSRahimiAModified hydroxyethyl cellulose as a highly efficient eco-friendly inhibitor for suppression of mild steel corrosion in a 15% HCl solution at elevated temperatures. J Mol Liq. 2021; 338:116607.
16.
GaoZZhangDJiangSXPS investigations on the corrosion mechanism of V (IV) conversion coatings on hot-dip galvanized steel. Corros Sci. 2018; 139:163–171.
17.
ShahmoradiARTalebibahmanbiglooNJavidparvarAAStudying the adsorption/inhibition impact of the cellulose and lignin compounds extracted from agricultural waste on the mild steel corrosion in HCl solution. J Mol Liq. 2020; 304:112751.
18.
JavidparvarAANaderiRRamezanzadehB.L-cysteine reduced/functionalized graphene oxide application as a smart/control release nanocarrier of sustainable cerium ions for epoxy coating anti-corrosion properties improvement. J Hazard Mater. 2020; 389:122135.
19.
AngstUBüchlerM.On the applicability of the Stern–Geary relationship to determine instantaneous corrosion rates in macro-cell corrosion. Mater Corros. 2015; 66(10):1017–1028.
20.
MansfeldF.Fundamental aspects of the polarization resistance technique—the early days. J Solid State Electrochem. 2009; 13(4):515–520.
