Effect of solution treatment on the micropore and mechanical properties is investigated for the DD6 superalloy. The results show that solution treatment has positive and negative effects on the DD6 superalloy, which can weaken the segregation significantly. After solution treatment, the segregation ratio of the major alloying elements tends to 1. However, the amount of micropores increases with increasing solutionising time and can reach 0.46%, which is one order of magnitude higher than that of the as-cast superalloy. The hardness increases slightly, especially for the superalloy solutionised at 1310°C with a 5% increase in hardness compared to the as-cast superalloy. Hardness, tensile and stress rupture properties of the DD6 superalloy can reach the best after solution treatment at 1310°C and 4 h.
ReedRC.The superalloys: fundamentals and applications. 1st ednCambridge: Elsevier; 2006. pp. 121–217.
2.
ZhangLHuangZPanYDesign of Re-free nickel-base single crystal superalloys using modelling and experimental validations. Model Simul Mater SC.2019; 27(6):065002.
3.
CampbellJTiryakioğluM.Bifilm defects in Ni-based alloy castings. Metall Mater Trans B. 2012; 43B:1–13.
4.
LiangY-JChengXWangH-M.A new microsegregation model for rapid solidification multicomponent alloys and its application to single-crystal nickel-base superalloys of laser rapid directional solidification. Acta Mater. 2016; 118:17–27.
5.
FuchsG.Solution heat treatment response of a third generation single crystal Ni-base superalloy. Mater Sci Eng A. 2001; 300(1–2):52–60.
6.
CaldwellEFelaFFuchsG.The segregation of elements in high-refractory-content single-crystal nickel-based superalloys. JOM. 2004; 56(9):44–48.
7.
PangHTZhangLHobbsRASolution heat treatment optimization of fourth-generation single-crystal nickel-base superalloys. Metall Mater Trans A. 2012; 43(9):3264–3282.
8.
JiangRBullDEvangelouAStrain accumulation and fatigue crack initiation at pores and carbides in a SX superalloy at room temperature. Int J Fatigue. 2018; 114:22–33.
9.
PrasadKSarkarRGopinathK.Role of shrinkage pores, carbides on cyclic deformation behaviour of conventionally cast nickel base superalloy CM247LC® at 870°C. Mater Sci Eng A. 2016; 654:381–389.
10.
BoksteinBEpishinALinkTModel for the porosity growth in single-crystal nickel-base superalloys during homogenization. Scripta Mater. 2007; 57(9):801–804.
11.
LiJZhongZTangD. A low-cost second generation single crystal superalloy DD6. Superalloys 2000, Edited by T.M. Pollock, R.D. Kissinger, R.R. Bowman,K.A.G reenM,. McLean, S. Olson, and J.J. Schina.TMS( The Minerals Metals & Materials society),2000, 777–783.
12.
LiJZhaoJLiuSEffects of low angle boundaries on the mechanical properties of single crystal superalloy DD6. Superalloys, Roger C. Reed, Kenneth A. Green, Pierre Caron, Timothy P. Gabb, Michael G.Fahrmann，Eric S. Huron and Shiela A. Woodard. TMS(The Minerals, Metals & Materials Society). 2008: 443–452.
ChapmanL.Application of high temperature DSC technique to nickel based superalloys. J Mater Sci. 2004; 39(24):7229–7236.
15.
LiuYKangMWuYEffects of microporosity and precipitates on the cracking behavior in polycrystalline superalloy Inconel 718. Mater Charact. 2017; 132:175–186.
16.
KangMYuJWangJInfluence of drawing velocity on the inner quality of single-crystal superalloy. J Mater Eng Perform. 2020; 29:2816–2826.
17.
WilsonBCHickmanJAFuchsGE.The effect of solution heat treatment on a single-crystal Ni-based superalloy. JOM. 2003; 55(3):35–40.
18.
ZheWYongLManWInfluences of solid solution temperatures on microstructue and mechanical properties of DD6 single crystal superalloy. Hot Working Tech(Chinese). 2017; 46(24):217–223.
19.
JahangiriMRBoutorabiSMAArabiH.Study on incipient melting in cast Ni base IN939 superalloy during solution annealing and its effect on hot workability. Mater Sci Technol. 2012; 28(12):1402–1413.
20.
OrlovM.Pore formation in single-crystal turbine rotor blades during directional solidification. Russian Metal (Metally). 2008; 2008(1):56–60.
21.
EpishinASvetlovI.Evolution of pore morphology in single-crystals of nickel-base superalloys. Inorg Mater Appl Res. 2016; 7(1):45–52.
22.
MotturaAReedRC.What is the role of rhenium in single crystal superalloys?. MATEC web of conferences; EDP Sciences, 2014, p. 01001.
23.
KarunaratneMRaeCReedR.On the microstructural instability of an experimental nickel-based single-crystal superalloy. Metall Mater Trans A. 2001; 32(10):2409–2421.
