In the present work, the thermal heating and cooling behaviour of a single-crystal superalloy containing 2wt-% Re was tested to investigate the γ′ dissolution process, and the surface recrystallisation behaviour of the grit-blasted superalloy was investigated near its ultimate service temperature of 1100°C by EBSD and TEM. Particularly, the aged samples were vertically polished to reveal the progress of the discontinuous precipitation reaction front. The microstructure characteristics, including grain orientation, grain size, texture and TCP phase precipitation, were revealed for a detailed understanding of the surface crystallisation behaviour of the material.
ReedRCTaoTWarnkenN.Alloys-by-design: application to nickel-based single crystal superalloys. Acta Mater. 2009; 57:5898–5913.
4.
XiaWZhaoXYueLA review of composition evolution in Ni-based single crystal superalloys. J Mater Sci Technol. 2020; 44:76–95.
5.
MoverareJJJohanssonSReedRC.Deformation and damage mechanisms during thermal-mechanical fatigue of a single-crystal superalloy. Acta Mater. 2009; 57:2266–2276.
6.
WuXMakineniSKLiebscherCHUnveiling the re effect in Ni-based single crystal superalloys. Nat Commun. 2020; 11:389.
7.
SegersallMKontisPPedrazziniSThermal-mechanical fatigue behavior of a new single crystal superalloy: effects of Si and Re alloying. Acta Mater. 2015; 95:456–467.
8.
JoCYChoHYKimHM.Effect of recrystallisation on microstructural evolution and mechanical properties of single crystal nickel base superalloy CMSX-2 Part 1-microstructural evolution during recrystallisation of single crystal. Mater Sci Tech. 2013; 19:1665–1670.
9.
PanwisawasCMathurHGebelinJPrediction of recrystallization in investment cast single-crystal superalloys. Acta Mater. 2013; 61:51–66.
10.
SihaiLXiangfanNLiuchengZThermal stability of surface nanostructure produced by laser shock peening in a Ni-based superalloy. Surf Coat Technol. 2017; 311:337–343.
11.
HeYHHouXQTaoCHRecrystallization and fatigue fracture of single crystal turbine blades. Eng Fail Anal. 2011; 18:944–949.
12.
ZhuoLXiongJChenQEBSD characterization of boundary types after discontinuous precipitation in a grit-blasted nickel-based superalloy. Mater Charact. 2018; 136:281–285.
13.
ZhuoLLiangSWangFKinetics and microstructural evolution during recrystallization of a single crystal superalloy. Mater Charact. 2015; 108:16–21.
14.
Matricarde FalleiroRMAkisawa SilvaLYMeirellesAJAVapor pressure data for fatty acids obtained using an adaptation of the DSC technique. Thermochim Acta. 2012; 547:6–12.
15.
KijchavengkulTAurasRRubinoM.Measuring gel content of aromatic polyesters using FTIR spectrophotometry and DSC. Polym Test. 2008; 27:55–60.
16.
SaundersNGuoUKZLiXUsing JMatPro to model materials properties and behavior. JOM. 2003; 55:60–65.
17.
YuXLinXTanHMicrostructure and fatigue crack growth behavior of Inconel 718 superalloy manufactured by laser directed energy deposition. Int J Fatigue. 2021: 143–145.
18.
SuiSTanHChenJThe influence of laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing. Acta Mater. 2019; 164:413–427.
19.
FriesSGSundmanB.Using Re-W (-phase first-principles results in the Bragg-Williams approximation to calculate finite-temperature thermodynamic properties. Phys Rev B. 2002; 66:012203.
20.
KongYHChenQZ.Effect of minor additions on the formation of TCP phases in modified RR2086 SX superalloys. Mater Sci Eng A. 2004; 366:135–143.
YinBXieGLouLAbnormal increase of TCP phase during heat treatment in a Ni-based single crystal superalloy. Scripta Mater. 2019; 173:1–4.
23.
KearseyRMAuPBeddoesJCThe effects of Re, W and Ru on micro segregation behavior in single crystal superalloy systems. Superalloys: TMS (The Minerals, Metals & Materials Society). 2004; 1:801–810.
24.
TianSQianBLiTEvolution and analysis of TCP phase in a single crystal nickel-based superalloy containing Re during aging. Rare Met. 2011; 30:452–456.
25.
YehACTinS.Effects of Ru and Re additions on the high temperature flow stresses of Ni-base single crystal superalloys. Scripta Mater. 2005; 52:519–524.
26.
DubielBIndykaPKalemba-RecIThe influence of high temperature annealing and creep on the microstructure and chemical element distribution in the (, (′ and TCP phases in single crystal Ni-base superalloy. J Alloy Compd. 2018; 731:693–703.
27.
ArgenceDVemaultCDesvallcesYMC-NG: A 4th generation single-crystal superalloy for future aeronautical turbine blades and vanes. TMS (The Minerals, Metals & Materials Society). 2000: 829–837.
28.
TanXPLiuJLJinTIntergrowth of P phase with µ phase in a Ru-containing single-crystal Ni-based superalloy. Phil Mag Lett. 2012; 92:556–562.
29.
WangHLiuYNingXOxidation of Ni-based single crystal after grit-blasting during exposure at high temperature. Mater High Temp. 2017; 34:215–221.
30.
FrijaMHassineTFathallahRFinite element modelling of shot peening process: prediction of the compressive residual stresses, the plastic deformations and the surface integrity. Mater Sci Eng A. 2006; 426:173–180.
31.
TanLYaoCZhangDEmpirical modeling of compressive residual stress profile in shot peening TC17 alloy using characteristic parameters and sinusoidal decay function. Proceed Inst Mech Eng, Part B: J Eng Manuf. 2018; 232:855–866.
32.
KasaiKMurakamiHKurodaSEffect of surface treatment and crystal orientation on microstructural changes in aluminized Ni-based single-crystal superalloy. Mater Trans. 2011; 52:1768–1772.
33.
KonijnenbergPJZaeffererSRaabeD.Assessment of geometrically necessary dislocation levels derived by 3D EBSD. Acta Mater. 2015; 99:402–414.
34.
MoussaCBernackiMBesnardRAbout quantitative EBSD analysis of deformation and recovery substructures in pure Tantalum, IOP conference series. Mater Sci Eng. 2015; 89:12038.
