To investigate the morphological evolution of the NbC phase, a niobium-cast iron diffusion couple was designed and fabricated. The two-dimensional (2D) and three-dimensional (3D) growth morphology of NbC particles were analysed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The morphological evolution mechanism of NbC particles was also discussed. The results reveal that from the interface of the Nb wire/NbC-Fe diffusion layer to the cast iron, as the thickness of the NbC-Fe diffusion layer increases, the morphology of NbC particles changed from the nearly spherical to truncated cube, then to a perfect cube. The evolution of particle morphology is mainly attributed to the change in the C/Nb ratio and the existence of Fe atoms affecting the relative growth rates of the {111} and {100} facets on a NbC crystal.
YangLZhangHWangYA novel and simple method for large-scale synthesis of nanosized NbC powder by disproportionation reaction in molten salt. Ceram Int. 2019; 45:3791–3796. doi: 10.1016/j.ceramint.2018.11.047
2.
MaJWuMDuYFormation of nanocrystalline niobium carbide (NbC) with a convenient route at low temperature. J Alloys Compd. 2009; 475:415–417. doi: 10.1016/j.jallcom.2008.07.039
3.
ZhaoYCuiCHanXPreparation of in situ NbC-TiC@graphene/Fe composite inoculant and its effect on microstructures and properties of GCr15. Mater Sci Eng A. 2020; 772:138737. doi: 10.1016/j.msea.2019.138737
4.
CaiXZhongLXuYKinetics of niobium carbide reinforced composite coating produced in situ
. Vacuum. 2015; 119:239–244. doi: 10.1016/j.vacuum.2015.05.035
5.
DemirskyiDBorodianskaHSuzukiTSHigh-temperature flexural strength performance of ternary high-entropy carbide consolidated via spark plasma sintering of TaC, ZrC and NbC. Scripta Mater. 2019; 164:12–16. doi: 10.1016/j.scriptamat.2019.01.024
ZhangMLiMChiJMicrostructure and tribology properties of in-situ MC(M:Ti,Nb) coatings prepared via PTA technology. Vacuum. 2019; 160:264–271. doi: 10.1016/j.vacuum.2018.11.035
8.
SoltaniRSohiMAnsariMEvaluation of niobium carbide coatings produced on AISI L2 steel via thermo-reactive diffusion technique. Vacuum. 2017; 146:44–51. doi: 10.1016/j.vacuum.2017.09.023
9.
XieJZengWZhouDMicrostructure and properties of a nanocrystalline Cu-Al-NbC composite with high strength and good conductivity. Mater Lett. 2018; 214:174–177. doi: 10.1016/j.matlet.2017.12.009
10.
VarelaLBCavaleiroATschiptschinAPTribological and milling performance of NbC-Ni films deposited by sputtering with different Ni contents. Tribol Int. 2020; 147:106281. doi: 10.1016/j.triboint.2020.106281
11.
KanWHProustGBhatiaVSlurry erosion, sliding wear and corrosion behavior of martensitic stainless steel composites reinforced in-situ with NbC particles. Wear. 2019; 420-421:149–162. doi: 10.1016/j.wear.2018.09.013
12.
ZengWXieJZhouDIn-situ formation of NbC in nanocrystalline Cu. J Alloys Compd. 2017; 725:334–341. doi: 10.1016/j.jallcom.2017.07.179
13.
ChangSYehPHuangK.Microstructures, mechanical properties and corrosion behaviors of NbC added to Vanadis 4 tool steel via vacuum sintering and heat treatments. Vacuum. 2017; 142:123–130. doi: 10.1016/j.vacuum.2017.05.015
14.
QinSLiaoBMaoLA novel method for preparing nano-NbC/Fe powder and nano-NbC particle reinforced cast low-carbon steel. Mater Lett. 2014; 121:162–165. doi: 10.1016/j.matlet.2014.01.168
15.
YuanYLiZ.Growth mechanism of in-situ WC grain in Fe-Ni-W-C alloys system. J Alloys Compd. 2018; 738:379–393. doi: 10.1016/j.jallcom.2017.11.382
16.
CaiXXuY.Microstructure, friction and wear of NbC coatings on a Fe substrate fabricated via an in situ reaction. Surf Coat Technol. 2017; 322:202–210. doi: 10.1016/j.surfcoat.2017.05.046
17.
GroveDEGuptaUCastlemanAW.JrEffect of hydrocarbons on the morphology of synthesized niobium carbide nanoparticles. Langmuir. 2010; 26:16517–16521. doi: 10.1021/la101738c
18.
ZhaoCZhouYXingXInvestigation on the relationship between NbC and wear-resistance of Fe matrix composite coatings with different C contents. Appl Surf Sci. 2018; 439:468–474. doi: 10.1016/j.apsusc.2018.01.034
19.
GroveDEGuptaUCastlemanAW.Effect of carbon concentration on changing the morphology of titanium carbide nanoparticles from cubic to cuboctahedron. ACS Nano. 2010; 4:49–54. doi: 10.1021/nn9010413
20.
ZhongLXuYLiuXStudy on NbC particulate-reinforced iron matrix composite produced in situ
. J Mater Sci. 2011; 46:2814–2819. doi: 10.1007/s10853-010-5157-1
21.
NieJWuYLiPMorphological evolution of TiC from octahedron to cube induced by elemental nickel. CrystEngComm. 2012; 14:2213. doi: 10.1039/c1ce06205k
22.
PrywerJ.Explanation of some peculiarities of crystal morphology deduced from the BFDH law. J Cryst Growth. 2004; 270:699–710. doi: 10.1016/j.jcrysgro.2004.06.046
23.
WangFLuoLMengXMorphological evolution of primary β-Nb5Si3 phase in Nb-Mo-Si alloys. J Alloys Compd. 2018; 741:51–58. doi: 10.1016/j.jallcom.2018.01.112
24.
BarzilaiSRavehAFrageN.Inter-diffusion of carbon into niobium coatings deposited on graphite. Thin Solid Films. 2006; 496:450–456. doi: 10.1016/j.tsf.2005.09.106
25.
OhtaniHHasebeMNishizawaT.Calculation of the Fe-C-Nb ternary phase diagram. Calphad. 1989; 13:183–204. doi: 10.1016/0364-5916(89)90019-9
26.
QinSLiaoBXiaoFFabrication of NbC reinforced low carbon steel by immersing Nb(C)-Fe powders in steel melt. Adv Manuf Process. 2015; 30:116–121. doi: 10.1080/10426914.2014.952034
27.
HaddadFAmaraSEKesriRContribution to the study of the Fe-Nb-C ternary system. J Phys IV France. 2004; 122:35–39. doi: 10.1051/jp4:2004122004
28.
XiaYXiongYLimBShape-controlled synthesis of metal nanocrystals: simple chemistry meets complex physics?Angew Chem Int Ed2009; 48:60–103. doi: 10.1002/anie.200802248
