The influence of low-temperature gaseous carburisation on notch fatigue behaviour of 316L steel under cyclic axial loading was investigated. After carburisation, the carburised case was well distributed at the surface region and was not influenced by the notch geometry. Low-temperature carburisation considerably enhanced the notch fatigue performance, which led to 32% and 44% increase in the endurance limits for the specimens with stress concentration factors Kt = 1.91 and 3.91, respectively. The notch sensitivity of 316L steel reduced after carburisation. Irrespective of the applied stress amplitude, the fatigue crack nucleation sites were always at the notch root surface for the untreated specimens. For the carburised specimens, fatigue cracks nucleation changed from surface at high-level stress to subsurface at low-level stress.
MittemeijerEJSomersMAJ.Thermochemical surface engineering of steels. Amsterdam: WoodHead Publishing; 2015.
3.
QuJBlauPJJollyBC.Tribological properties of stainless steels treated by colossal carbon supersaturation. Wear. 2007; 263(1–6):719–726. doi: 10.1016/j.wear.2006.12.049
4.
RotundoFCeschiniLMartiniCHigh temperature tribological behaviour and microstructural modifications of the low-temperature carburised AISI 316L austenitic stainless steel. Surf Coat Tech. 2014; 258:772–781. doi: 10.1016/j.surfcoat.2014.07.081
5.
TokajiKKohyamaKAkitaM.Fatigue behaviour and fracture mechanism of a 316 stainless steel hardened by carburizing. Int J Fatigue. 2004; 26(5):543–551. doi: 10.1016/j.ijfatigue.2003.08.024
6.
CeschiniLMinakG.Fatigue behaviour of low temperature carburized AISI 316L austenitic stainless steel. Surf Coat Tech. 2008; 202(9):1778–1784. doi: 10.1016/j.surfcoat.2007.07.066
7.
AgarwalNKahnHAvishaiAEnhanced fatigue resistance in 316L austenitic stainless steel due to low-temperature paraequilibrium carburization. Acta Mater. 2007; 55(16):5572–5580. doi: 10.1016/j.actamat.2007.06.025
8.
PengYLiuZChenCEffect of low-temperature surface hardening by carburization on the fatigue behavior of AISI 316L austenitic stainless steel. Mater Sci Eng A. 2020; 769:138524. doi: 10.1016/j.msea.2019.138524
9.
NiuWLillardRSLiZProperties of the passive film formed on interstitially hardened AISI 316L stainless steel. Electrochim Acta. 2015; 176:410–419. doi: 10.1016/j.electacta.2015.06.102
10.
PengYChenCLiXEffect of low-temperature surface carburization on stress corrosion cracking of AISI 304 austenitic stainless steel. Surf Coat Tech. 2017; 328:420–427. doi: 10.1016/j.surfcoat.2017.08.058
11.
HattoriNNishidaSYanoYFatigue properties of austenitic stainless steel with circumferential notch. Key Eng Mater. 2007; 353-358:243–247. doi: 10.4028/www.scientific.net/KEM.353-358.243
12.
AgrawalRVeerababuJGoyalSEstimation of low cycle fatigue response of 316LN stainless steel in the presence of notch. J Mater Eng Perform. 2018; 27:590–600. doi: 10.1007/s11665-018-3149-5
13.
AkitaMTokajiK.Effect of carburizing on notch fatigue behaviour in AISI 316 austenitic stainless steel. Surf Coat Tech. 2006; 200:6073–6078. doi: 10.1016/j.surfcoat.2005.09.018
14.
MinakG.On the notch effect in low-temperature carburized stainless steel under fatigue. EPJ Web of Conferences. 2020; 6:02003. doi: 10.1051/epjconf/20100602003
15.
PengYGongJJiangYThe effect of plastic pre-strain on low-temperature surface carburization of AISI 304 austenitic stainless steel. Surf Coat Technol. 2016; 304:16–22. doi: 10.1016/j.surfcoat.2016.05.047
16.
MichalGMErnstFKahnHCarbon supersaturation due to paraequilibrium carburization: stainless steels with greatly improved mechanical properties. Acta Mater. 2006; 54(6):1597–1606. doi: 10.1016/j.actamat.2005.11.029
17.
GalloSCDongH.EBSD and AFM observations of the microstructural changes induced by low temperature plasma carburising on AISI 316. Appl Surf Sci. 2011; 258(1):608–613. doi: 10.1016/j.apsusc.2011.06.158
18.
HuangHWWangZBLuJFatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer. Acta Mater. 2015; 87:150–160. doi: 10.1016/j.actamat.2014.12.057
19.
BagherifardSSlawikSFernández-ParienteINanoscale surface modification of AISI 316L stainless steel by severe shot peening. Mater Design. 2016; 102:68–77. doi: 10.1016/j.matdes.2016.03.162
20.
MaistroGOikonomouCRogströmLUnderstanding the microstructure-properties relationship of low-temperature carburized austenitic stainless steels through EBSD analysis. Surf Coat Technol. 2017; 322:141–151. doi: 10.1016/j.surfcoat.2017.05.036
21.
NeuberH.Theory of notch stresses. Michigan: Edwards Brothers Publisher; 1946.
22.
WollmannMAtouraJMhaedeMComparing fatigue notch sensitivities of various alloys before and after mechanical surface treating. In: J. Champaigne, editor. 11th International Conference on Shot Peening ICSP11, 2011, South Bend, Indiana, USA, Shot Peening; 2011. p. 423–428.
23.
JiangYLiYJiaYGradient elastic-plastic properties of expanded austenite layer in 316L stainless steel. Acta Metall Sin-Engl. 2018; 30:831–841. doi: 10.1007/s40195-018-0710-z
24.
ChanKS.Roles of microstructure in fatigue crack initiation. Int J Fatigue. 2010; 32(9):1428–1447. doi: 10.1016/j.ijfatigue.2009.10.005
25.
HsuJ-PWangDKhanHFatigue crack growth in interstitially hardened AISI 316L stainless steel. Int J Fatigue. 2013; 47:100–105. doi: 10.1016/j.ijfatigue.2012.07.014
