This study aims to clarify effects of isothermal bainitic transformation (IBT) temperature on microstructure and mechanical properties of a high Al–low Si δ-TRIP steel. For this purpose, the alloy was austenitised at the intercritical annealing temperature of 820°C for 600 s and then was isothermally cooled down into a salt bath and held at the temperatures between 350 and 450°C for 360 s. X-ray diffraction indicates that by increasing the IBT temperature, the volume fraction of retained austenite increases. In addition, it was found that the optimum combination of strength and ductility, i.e. tensile strength of 1046 MPa and total elongation of 54%, was achieved in the sample which was isothermally held at 450°C for 360 s.
ChiangJBoydJDPilkeyAK.Effect of microstructure on retained austenite stability and tensile behaviour in an aluminum-alloyed TRIP steel. Mater Sci Eng A. 2015; 638:132–142. doi: 10.1016/j.msea.2015.03.069
2.
JiangHWuHTangDInfluence of isothermal bainitic processing on the mechanical properties and microstructure characterization of TRIP steel. J Univ Sci Technol Beijing Miner Metall Mater. 2008; 15:574–579. doi: 10.1016/S1005-8850(08)60107-3
3.
LyALFindleyKO.The effects of pre-straining conditions on fatigue behavior of a multiphase TRIP steel. Int J Fatigue. 2016; 87:225–234. doi: 10.1016/j.ijfatigue.2016.02.004
4.
Gholami ShiriSPalizdarYJenabali JahromiAThe failiur analysis of Nb-microalloyed δ-TRIP steel. Iran J Mater Sci Eng. 2018; 15:32–42. doi: 10.22068/ijmse.15.3.32
5.
Ghadarghadr JahromiKZarei-HanzakiAGolmahallehO.Ultra fine ferrite formation in Si-Mn trip steels. Iran J Mater Sci Eng. 2008; 5:1–7.
6.
ShenYFLiuYDSunXImproved ductility of a transformation-induced-plasticity steel by nanoscale austenite lamellae. Mater Sci Eng A. 2013; 583:1–10. doi: 10.1016/j.msea.2013.06.062
7.
ZhaoYYanQChenLEffect of isothermal temperature on microstructure and mechanical properties of high Al–low Si TRIP steel. Acta Metall Sin Engl Lett. 2014; 27:389–394. doi: 10.1007/s40195-014-0068-9
8.
TimokhinaIBHodgsonPDPerelomaEV.Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels. Metall Mater Trans A. 2004; 35:2331–2341. doi: 10.1007/s11661-006-0213-9
9.
LuoLLiWWangLTensile behaviors and deformation mechanism of a medium Mn-TRIP steel at different temperatures. Mater Sci Eng A. 2017; 682:698–703. doi: 10.1016/j.msea.2016.11.017
10.
WangCDingHZhangJEffect of intercritical annealing time on the microstructures and tensile properties of a high strength TRIP steel. Acta Metall Sin Engl Lett. 2014; 27:457–463. doi: 10.1007/s40195-014-0061-3
11.
WangCDingHZhangJEffect of partial replacement of Si with Al on the microstructures and mechanical properties of 1000 MPa TRIP steels. J Mater Eng Perform. 2014; 23:3896–3906. doi: 10.1007/s11665-014-1190-6
12.
JiangHDingWTangDMechanical property and microstructural characterization of C-Mn-Al-Si hot dip galvanizing TRIP steel. J Iron Steel Res Int. 2012; 19:29–36. doi: 10.1016/S1006-706X(12)60136-8
13.
ShiriSGJahromiSAJPalizdarYUnexpected effect of Nb addition as a microalloying element on mechanical properties of δ-TRIP steels. J Iron Steel Res Int. 2016; 23:988–996. doi: 10.1016/S1006-706X(16)30148-0
14.
MakiJMahieuJDe CoomanBCGalvanisability of silicon free CMnAl TRIP steels. Mater Sci Technol. 2003; 19:125–131. doi: 10.1179/026708303225009300
15.
BellhouseEMMcDermidJR.Analysis of the Fe–Zn interface of galvanized high Al–low Si TRIP steels. Mater Sci Eng A. 2008; 491:39–46. doi: 10.1016/j.msea.2007.12.033
16.
LimNParkHKimSEffects of aluminum on the microstructure and phase transformation of TRIP steels. Met Mater Int. 2012; 18:647–654. doi: 10.1007/s12540-012-4012-0
17.
BellhouseEMMcDermidJR.Effect of continuous galvanizing heat treatments on the microstructure and mechanical properties of high Al-low Si transformation induced plasticity steels. Metall Mater Trans A. 2010; 41:1460–1473. doi: 10.1007/s11661-010-0185-7
18.
XiongXCSunLWangJFProperties assessment of the first industrial coils of low-density duplex δ-TRIP steel. Mater Sci Technol. 2016; 32:1403–1408. doi: 10.1080/02670836.2015.1130364
19.
YiHLChenPBhadeshiaH.Optimizing the morphology and stability of retained austenite in a δ-TRIP steel. Metall Mater Trans A. 2014; 45:3512–3518. doi: 10.1007/s11661-014-2267-4
20.
YiHL.Review on δ-transformation-induced plasticity (TRIP) steels with low density: the concept and current progress. JOM. 2014; 66:1759–1769. doi: 10.1007/s11837-014-1089-6
21.
DingWHedströmPLiY.Heat treatment, microstructure and mechanical properties of a C–Mn–Al–P hot dip galvanizing TRIP steel. Mater Sci Eng A. 2016; 674:151–157. doi: 10.1016/j.msea.2016.07.119
22.
De CoomanBC.Structure–properties relationship in TRIP steels containing carbide-free bainite. Curr Opin Solid State Mater Sci. 2004; 8:285–303. doi: 10.1016/j.cossms.2004.10.002
23.
BilmesPDSolariMLlorenteCL.Characteristics and effects of austenite resulting from tempering of 13Cr–NiMo martensitic steel weld metals. Mater Charact. 2001; 46:285–296. doi: 10.1016/S1044-5803(00)00099-1
24.
GesnouinCHazarabedianABruzzoniPEffect of post-weld heat treatment on the microstructure and hydrogen permeation of 13CrNiMo steels. Corros Sci. 2004; 46:1633–1647. doi: 10.1016/j.corsci.2003.10.006
25.
BashuSASinghKRawatMS.Effect of heat treatment on mechanical properties and fracture behaviour of a 12CrMoV steel. Mater Sci Eng A. 1990; 127:7–15. doi: 10.1016/0921-5093(90)90184-5
26.
CarrougeDBhadeshiaHKDHWoollinP.Effect of δ-ferrite on impact properties of supermartensitic stainless steel heat affected zones. Sci Technol Weld Join. 2004; 9:377–389. doi: 10.1179/136217104225021823
27.
SuiGCharlesEACongletonJ.The effect of delta-ferrite content on the stress corrosion cracking of austenitic stainless steels in a sulphate solution. Corros Sci. 1996; 38:687–703. doi: 10.1016/0010-938X(96)00159-X
28.
ShangZShenYJiBEffect of δ-ferrite evolution and high-temperature annealing on mechanical properties of 11Cr3W3Co ferritic/martensitic steel. Met Mater Int. 2016; 22:171–180. doi: 10.1007/s12540-016-5485-z
29.
van DijkNHButtAMZhaoLThermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling. Acta Mater. 2005; 53:5439–5447. doi: 10.1016/j.actamat.2005.08.017
30.
GrajcarAKrztońH.Effect of isothermal bainitic transformation temperature on retained austenite fraction in C-Mn-Si-Al-Nb-Ti TRIP-type steel. J Achiev Mater Manuf Eng. 2009; 35:9.
31.
HuoY-QLongX-HZhouZ-HBainite transformation and TRIP effect in 20Mn2SiVB steel. Mater Sci Eng A. 2006; 438–440:158–161. doi: 10.1016/j.msea.2006.02.148
32.
KwonEPFujiedaSShinodaKCharacterization of transformed and deformed microstructures in transformation induced plasticity steels using electron backscattering diffraction. Mater Sci Eng A. 2011; 528:5007–5017. doi: 10.1016/j.msea.2011.03.033
33.
CuddyLJLeslieWC.Some aspects of serrated yielding in substitutional solid solutions of iron. Acta Metall. 1972; 20:1157–1167. doi: 10.1016/0001-6160(72)90164-2
34.
DasturYNLeslieWC.Mechanism of work hardening in Hadfield manganese steel. Metall Trans A. 1981; 12:749–759. doi: 10.1007/BF02648339
35.
ShiekhelsoukMNFavierVInalKModelling the behaviour of polycrystalline austenitic steel with twinning-induced plasticity effect. Int J Plast. 2009; 25:105–133. doi: 10.1016/j.ijplas.2007.11.004
36.
ChenLKimH-SKimS-KLocalized deformation due to Portevin–LeChatelier effect in 18Mn–0.6C TWIP austenitic steel. ISIJ Int. 2007; 47:1804–1812. doi: 10.2355/isijinternational.47.1804
37.
CottrellAH.LXXXVI. A note on the Portevin-Le Chatelier effect. Lond Edinb Dublin Philos Mag J Sci. 1953; 44:829–832. doi: 10.1080/14786440808520347
38.
CaiZHDingHMisraRDKUnique serrated flow dependence of critical stress in a hot-rolled Fe–Mn–Al–C steel. Scr Mater. 2014; 71:5–8. doi: 10.1016/j.scriptamat.2013.09.009
