A modified iron-based superalloy is studied regarding its hot formability. The microstructure contained particles of titanium carbides, carbonitrides and nitrates. Torsion tests at high strain rate at temperatures ranging from 800 to 1200°C were conducted. Results of these tests were correlated by means of the Garofalo hyperbolic sine creep relation. An optimum forming temperature of 1260°C at 10 s−1 is obtained. This temperature is strongly dependent on the strain rate. An activation energy for plastic deformation close to that for the activation energy for lattice diffusion in austenitic stainless steels and a stress exponent near 5 were obtained. These values suggest that plastic deformation is controlled by a dislocation climb mechanism.
BricknerKG, DefillippiJD.Handbook of stainless steels. PecknerD, BersteinIM editors. New York ( NY): McGraw-Hill; 1977.
2.
TrumanJE.Materials science and technology: A Comprehensive treatment, Vol. 7–constitution and properties of steels, PickeringFB editor. Weinheim: VCH; 1992.
3.
LocqD, MartyM, WalderA, Development of New PM superalloys for high temperature applications. In: MorrisDG, editor. Intermetallics and superalloys. Vol. 10, Weinheim: Wiley-VCH; 2000. p. 52–57.
4.
SimsCT, StoloffNS, HagelWC, editors. Superalloys II. New York ( NY): Wiley; 1987.
5.
Incoloy alloy 800H, Special Metals, Publication SMC-046, 2004.
6.
PrasadYVRK, GegelHL, DoraiveluSM, Modeling of dynamic material behavior in hot deformation: forging of Ti-6242. Metall Trans A. 1984;15:1883–1892. doi: 10.1007/BF02664902
7.
PrasadYVRK.Recent advances in the science of mechanical processing. Ind J Technol. 1990;28:435–451.
8.
PrasadYVRK, SeshacharyuluT.Processing maps for hot working of titanium alloys. Mater Sci Eng A. 1998;243:82–88. doi: 10.1016/S0921-5093(97)00782-X
9.
ZieglerH.Progress in solid mechanics. New York, NY: John Wiley; 1963.
10.
RieiroI, CarsíM, RuanoOA.A new stability criterion for the hot deformation behavior of materials. Application to the AZ31 magnesium alloy. Metall Mater Trans A. 2017;48:3445–3460. doi: 10.1007/s11661-017-4102-1
11.
CarsíM, PeñalbaF, RieiroI, Hot forging of a Cu-Al-Ni-Fe-Mn alloy and its simulation by torsion testing. Z Metalkd. 2000;91:1057–1062.
12.
GarcíaC, CarsíM, PeñalbaF, Structure-thermomechanical parameters relationship and Zener-Hollomon equation for two vanadium microalloyed steels. J Mater Sci. 1992;27:4567–4576. doi: 10.1007/BF01165989
13.
LyapunovAM.The General problem of stability of Motion, Taylor and Francis Bristol, PA, 1992, reedited. Int J Control. 1992;55(3):521–527. doi: 10.1080/00207179208934253
14.
FieldsDS, BackofenWA.Determination of strain hardening characteristics by torsion testing. Proc ASTM. 1957;57:1259–1272.
15.
GarofaloF.An empirical relation defining the stress dependence of minimum creep rate in metals. Trans AIME. 1963;227:1474–1477.
16.
AdamczykJ, CarsiM, KozikR, Structure evolution during hot deformation of a C-Mn-V-N steel grade. J Mater Process Technol. 1995;53:15–22. doi: 10.1016/0924-0136(95)01957-G
17.
CarsíM, CarreñoF, RuanoOA.Hot forming optimization of ZK30 magnesium alloy. Mater Sci Forum. 2018;941:2325–2330. doi: 10.4028/www.scientific.net/MSF.941.2325
18.
RieiroI, CarsíM, RuanoOA.New numerical method for the fit of Garofalo equation and its application for predicting hot workability of a (V–N) microalloyed steel. Mater Sci Technol. 2009;25:995–1002. doi: 10.1179/174328408X369429
19.
CarsíM, AlonsoM, CastellanosJ, Optimum hot forming temperature of AZ61 magnesium alloy. Mater Sci Technol. 2018;34:1425–1432. doi: 10.1080/02670836.2018.1458480
20.
TangH, YangM, MengW, Hot deformation behaviour and microstructure of a high-alloy gear steel. Mater Sci Technol. 2018;34(10):1228–1238. doi: 10.1080/02670836.2018.1437691
21.
LiuXG, JiHP, GuoH, Study on hot deformation behaviour of 316LN austenitic stainless steel based on hot processing map. Mater Sci Technol. 2013;20:24–29. doi: 10.1179/1743284712Y.0000000083
22.
ParksPCAM.Lyapunov's stability theory-100 years on. IMA J Math Control Inform. 1992;9:275–303. doi: 10.1093/imamci/9.4.275
23.
CunatPJ.Alloying elements in stainless steel and other chromium-containing Alloys. Euro Inox. Paris: ICDA; 2004.
24.
LinYC, WuX-Y, ChenX-M, EBSD study of a hot deformed nickel-based superalloy. J Alloys Comp. 2015;640:101–113. doi: 10.1016/j.jallcom.2015.04.008
25.
CarsíM, PeñalbaF, RieiroI, High temperature workability behaviour of a modified P92 steel. Int J Mater Res. 2011;102:1378–1383. doi: 10.3139/146.110603
26.
McQueenHJ, RyanND.Constitutive analysis in hot working. Mater Sci Eng A. 2002;322:43–63. doi: 10.1016/S0921-5093(01)01117-0
27.
RuanoOA, WolfenstineJ, WadsworthJ, Harper-Dorn and power law creep in uranium dioxide. Acta Metall Mater. 1991;39:661–668. doi: 10.1016/0956-7151(91)90134-M
28.
McQueenHJ, RyanND, SakarisP.Variation of sinh constitutive constants with stress multiplier for 316 austenitic stainless steel. In: BoillotJP, EvrardM, GalboisA, , Metal welding, applications and thermomechanical processing. Montreal: Met. Soc. CIM; 1999. p. 427–430.
29.
RuanoOA, MillerA, SherbyOD.The influence of pipe diffusion on creep of fine-grained materials. Mater Sci Eng. 1981;51:9–16. doi: 10.1016/0025-5416(81)90100-2
30.
BuffingtonFS, HiranoK, CohenM.Self diffusion in iron. Acta Metall. 1961;9:434–439. doi: 10.1016/0001-6160(61)90137-7
31.
JiménezJA, RuanoOA, LarreaMT, High temperature mechanical behavior of a 30%Ni-19%Cr steel. ISIJ Int. 2003;43:2062–2066. doi: 10.2355/isijinternational.43.2062
32.
TanakaK, NakamuraT, HoshidaY, Determination of the constants in the Zener-Hollomon hyperbolic equation for high temperature deformation. Res Mech. 1984;12:41–57.
33.
MalasJC, SeetharamanV.Using material behavior models to develop process control strategies. J Met. 1992;44:8–13.
34.
GegelHL, MalasJC, DoraiveluSM, Modeling techniques used in forging process design. Metals handbook. Vol. 14. Metals Park, OH: ASM; 1987. p. 417–438.
35.
MalasJCIII. Methodology for design and control of thermomechanical processes [PhD thesis]. Athens, OH: Ohio University; 1991.
36.
AlexanderJM.Modelling hot deformation of steels. In: LenardJG, Berlin: Springer; 1989. p. 101–116.
37.
Narayana MurtySVS, RaoBN.On the flow localization concepts in the processing maps of titanium alloy Ti–24Al–20Nb. J Mater Process Technol. 2000;104:103–105. doi: 10.1016/S0924-0136(00)00517-3
38.
Narayana MurtySVS, RaoBN, KashyapBP.Identification of flow instabilities in the processing maps of AISI 304 stainless steel. J Mater Process Technol. 2005;166:268–278. doi: 10.1016/j.jmatprotec.2004.09.089
