The effect of post quench delay on residual stress has been determined by subjecting four rectilinear blocks of quenched 7075, containing large residual stress magnitudes, to small (<1.0%) plastic strains applied by cold compression. One experiment kept the plastic strain the same in all samples (∼0.12%) by cold compressing simultaneously in one pressing. The second pressed the blocks separately to the same strain (∼0.45%). The post quench delays were <10, 60, 120 and 240 min. The residual stresses were characterised using neutron and X-ray diffraction. It was possible to detect the impact of the small plastic strains on all samples, but the diffraction measurement techniques could not conclusively isolate the influence of the post quench delay.
MyerRT, KilpatrickSA, BackusWE.Stress-Relief of aluminium for aircraft. Metal Progress. 1959;3:112–115.
2.
KleintRE, JanneyFG.Stress relief in aluminum forgings. Light Metal Age. 1958;2:14–21.
3.
KleinJ.Cold reduction technique puts more forgings in the air. Precision Metal Molding. 1967;6:53–54.
4.
BetteridgeW.The relief of internal stresses in aluminum alloys by cold workingSymposium on internal stresses in metals and alloys. London: Institute of Metals; 1948. p. 171–178.
5.
CoulesHE, Three-dimensional mapping of the residual stress field in a locally-rolled aluminium alloy specimen. J Manuf Process. 2017;26:240–251. doi: 10.1016/j.jmapro.2017.02.010
6.
LinGY, Residual stress in quenched 7075 aluminum alloy thick plates. Trans Nonferrous Metals Soc China. 2003;13(3):641–644.
7.
ZhangZ, Assessment of residual stress of 7050-T7452 aluminum alloy forging using the contour method. Mater Sci Eng Struct Mater Prop Microstruct Process. 2015;644:61–68. doi: 10.1016/j.msea.2015.07.018
8.
AltschulerY, KaatzT, CinaB.Mechanical relaxation of residual stressesASTM STP 993. Cincinnati ( Ohio USA1988. p. 19–29.
9.
RobinsonJS.Residual stress in heat treatable aluminum alloys. In: TottenGE, MackenzieDS, editor. ASM handbook volume 4E: heat Treating of Nonferrous alloys. Materials Park, OH: ASM International: ASM World Headquarters; 2016. p. 198–213.
10.
SimWM.Challenges of residual stress and part distortion in the civil airframe industry. Int J Microstruct Mater Prop. 2010;5(4):446–455.
11.
LiJG, WangSQ.Distortion caused by residual stresses in machining aeronautical aluminum alloy parts: recent advances. Int J Adv Manuf Technol. 2017;89(1-4):997–1012. doi: 10.1007/s00170-016-9066-6
12.
LlanosI, LanzagortaJL, BeristainA.Part distortion modeling on aluminum slender structural components for aeronautical industry. In: OuteiroJ, PoulachonG, editors. 16th Cirp conference on modelling of machining operations Vol. 582017. p. 158–162https://doi.org/10.1016/j.procir.2017.03.213
13.
RashedHMMA.Chapter 13 - control of distortion in aluminium heat treatment. In: LumleyRN, editor. Fundamentals of aluminium Metallurgy. Duxford, UK: Woodhead; 2018. p. 495–524.
14.
MenaR, Reshaping of large Aeronautical Structural parts: A Simplified Simulation Approach. In: FratiniL, , editor. Proceedings of 21st International Esaform Conference on material forming. 2018.
15.
PanR, Quantification of thermal residual stresses relaxation in AA7xxx aluminium alloy through cold rolling. J Mater Process Technol. 2019;264:454–468. doi: 10.1016/j.jmatprotec.2018.09.034
16.
Ohl IVRG, Comparison of stress relief procedures for cryogenic aluminum mirrors. In: HeaneyJB, BurriesciLG, editors. Cryogenic optical Systems and Instruments IX2002. p. 51–71https://doi.org/10.1117/12.451762
17.
MattosWS, TottenGE, CanaleLCF.Uphill quenching of Aluminum alloys. Materials Performance and Characterization. 2017;6(5):894–903. doi: 10.1520/MPC20160125
18.
LequeuP, Engineering for the future: weight saving and cost reduction initiatives. Aircr Eng Aerosp Technol. 2001;73(2):147–159. doi: 10.1108/00022660110386663
19.
Van Der VeenS, Low internal stress Al-Zn-Cu-Mg platesUnited States Patent Application Publication ; 2006.
20.
ChobautN, Residual Stress Analysis in AA7449 As-Quenched Thick Plates Using Neutrons and FE Modelling. in ICAA13: 13th International Conference on Aluminum Alloys. 2012. John Wiley & Sons, Inc.
21.
BatesCE, TottenGE.Procedure for quenching Media Selection to Maximize tensile properties and Minimize distortion in Aluminum-alloy parts. Heat Treat Met. 1988;15(4):89–97.
22.
FinkWL, WilleyLA.Quenching of 75s-Aluminum alloy. Trans Am Inst Mining Metal Eng. 1948;175:414–427.
23.
CroucherTR, ButlerD.Quenching, major stress source in treated aluminium alloys. Heat Treating. 1980;12(10):34–37.
24.
RobinsonJS, TannerDA, TrumanCE.50th Anniversary Article: The origin and Management of residual stress in heat-treatable aluminium alloys. Strain. 2014;50(3):185–207. doi: 10.1111/str.12091
25.
DieterGE.Hot compression testing. In: DieterGE, editor. Handbook of Workability and process Design. Cincinnati ( Ohio): ASM International; 2003. p. 64–67.
26.
KrawitzAD.Neutron strain measurement. Mater Sci Technol. 2011;27(3):589–603. doi: 10.1179/1743284710Y.0000000029
27.
21432, D.C.I.T., Non-destructive testing. Standard test method for determining of residual stresses by neutron diffraction. British Standards Institute; 2005.
28.
IS0/TTA3. Polycrystalline materials – Determination of residual stresses by neutron diffraction. In: Technology trends assessment. International Standardisation Organisation; 2001.
29.
RobinsonJS, Influence of quenching and aging on residual stress in Al-Zn-Mg-Cu alloy 7449. Mater Sci Technol. 2012;28(4):420–430. doi: 10.1179/1743284711Y.0000000063
30.
HutchingsMT, Introduction to the characterisation of residual stress by neutron diffraction. Boca Raton ( FL): CRC Press; 2005; 424.
31.
RobinsonJS, Residual stress relief in the aluminium alloy 7075. in MECA SENS VIII 8th International conference on mechanical stress evaluation by neutron & synchrotron radiation. 2015. Grenoble, France: Trans Tech.
32.
RobinsonJS, Influence of cold compression on the residual stresses in 7449 forgings. Adv X-Ray Anal. 2009;52:667–674.
33.
FitzpatrickME, Determination of residual stresses by X-ray diffractionMeasurement Good practice guide. Teddington, UK: National Physical Laboratory; 2002.
34.
CullityBD, StockSR.Elements of x-ray diffraction. 3d ed.Upper Saddle River ( New Jersey): Prentice Hall; 2001.
RobinsonJS, Residual stress relief in the aluminium alloy 7075. Mater Sci Technol. 2017;33(15):1765–1775. doi: 10.1080/02670836.2017.1318243
37.
RobinsonJS, Cold compression of 7075 and factors Influencing stress relief. Materials Performance and Characterization. 2018;7(4):898–911. doi: 10.1520/MPC20170130
38.
PrimeMB, HillMR.Residual stress, stress relief, and inhomogeneity in aluminum plate. Scr Mater. 2002;46(1):77–82. doi: 10.1016/S1359-6462(01)01201-5
39.
RobinsonJS, TiernanPJ, KelleherJF.Effect of post-quench delay on stress relieving by cold compression for the aluminium alloy 7050. Mater Sci Technol. 2015;31(4):409–417. doi: 10.1179/1743284714Y.0000000571
