Sage Journals: Discover world-class research

Abstract

Thixoforming involves processing alloys with a spheroidal microstructure in the semisolid state. Commercially it is applied to conventional casting alloys, and one of the scientific challenges is to extend its application to high performance aluminium alloys such as 7075. Aluminium alloy 7075 is readily available in extruded form, and one route to a spheroidal microstructure is to reheat extruded material into the semisolid state to obtain recrystallisation, with the liquid penetrating the recrystallised boundaries. Here this route has been followed, but it has been found that the presence of pinning particles in the microstructure inhibits recrystallisation. To overcome this, a multistep induction heating regime has been developed consisting of a 1 min hold at 475-500 °C, a 1 min hold at 575-600 °C and a shorter 20 s hold for the final step at 620 °C.

Keywords

THIXOFORMING 7075 WROUGHT ALUMINIUM ALLOY INDUCTION HEATING SEMISOLID PROCESSING

Get full access to this article

View all access options for this article.

References

FLEMINGS

M. C.

: Metall. Trans A, 1991, 22A, 957–981.

SPENCER

D. B.

, MEHRABIAN

and FLEMINGS

m. C.

: Metall. Trans., 1972,3, 1925–1932.

KAPRANOS

, WARD

P. J.

, ATKINSON

H. V.

and KIRKWOOD

D. H.

: Mater. Des, 2000, 21, 387–394.

KIRKWOOD

D. H.

: Int. Mater. Rev., 1994, 39, 173–189.

KIRKWOOD

D. H.

, SELLARS

C. M.

and BOYED

L. G. ELIAS

: European Patent 0 305 375 B1 ‘Thixotropic materials’ 28/10/92, US Patent 5 133 811 28/7/92.

ATKINSON

L. C. V.

and LIU

: Proc. 7th Int. Conf. on ‘Advanced semi-solid processing of alloys and composites’, (ed. Tsutui

et al), 51-56; Tokyo, National Institute of Advanced Industrial Science and Technology.

‘Metals handbook’, Desk edn ; 1984, Metals Park, OH, American Society for Metals.

MONDOLFO

L. F.

: Int. Met. Rev., 1971, 16, 95–124.

POLMEAR

I. J.

: ‘Light alloys’, 3rd edn; 1995, London, Edward Arnold.

10.

STALEY

J. T.

: Proc. 3rd Int. Conf. on ‘Aluminium alloys’, Vol. 3, ‘Their physical and mechanical properties’, (ed. L. Amberg, et al.) 107-143; 1992, Trondheim, The Norwegian Institute of Technology.

11.

RAGHAVAN

, KOO

J. Y.

, STEEDS

J. W.

and PARK

B. K.

: Metall. Trans A, 1985, 16A, 1925–1936.

12.

FINE

M. E.

: Metall. Trans A, 1975, 6A, 625–630.

13.

BACKERUD

, KROL

and TAMMINEN

: ‘Solidification characteristics of aluminium alloys’, Vol. 1; 1986, Oslo, Tangen Trykk A/S.

14.

JUNG

H. K.

and KANG

C. G.

: Metall. Trans A, 1999, 30A, 2967–2977.

15.

BURKE

K. J.

: ‘Semi-solid processing of aluminium 7075’, PhD thesis, University of Sheffield, UK, 1998.

16.

ANNAVARAPU

and DOHERTY

R. D.

: Acta Metall. Mater., 1995, 43, 3207–3230.

17.

KIUCHI

, YANAGIMOTO

and SUGIYAMA

: Proc. 5th Int. Conf. on ‘Semi-solid processing of alloys and composites’, (ed. Bhasin

A. K.

et al.), 589-596; 1998, Colorado School of Mines.

18.

WITULSKI

, MORJAN

, NIEDICK

and HIRT

: Proc. 5th Int. Conf. on ‘Semi-solid processing of alloys and composites’, (ed. Bhasin

A. K.

et al.), 353-360; 1998, Golden, CO, Colorado School of Mines.

Multistep induction heating regimes for thixoforming 7075 aluminium alloy

Abstract

Keywords

Get full access to this article

References