Owing to the physical properties of copper and its alloys it is challenging to achieve good surface quality and low porosity by the widely used laser-based additive manufacturing processes. This paper deals with the role of alloy composition, powder size and process parameters in additive manufacturing with laser beam melting machine (with power up to 100 W). Test parts were produced in pure copper and CuNiSi(Cr) alloys. The porosity was investigated as a function of different process parameters and powder size ranges. The effects of the alloy physical properties (reflectivity, thermal conductivity, melting range and surface tension) are discussed. Moreover, the effect of thermal treatment on the properties of CuNiSi parts was assessed in conventional two-step heat treatments.
TibertoD, KlotzU, HeldF.Einfluss der thermophysikalischen Eigenschaften auf die Verarbeitbarkeit von CuSn-Legierungen durch das selektive Laserschmelzen. Metall. 2017;71:452–458.
2.
BeckerD.Selektives Laserschmelzen von Kupfer und Kupferlegierungen, first ed. Apprimus Verlag, RWTH Aachen, pp. 7–9., pp. 39, 2014.
3.
IkeshojiT-T, NakamuraK, YoneharaM, Selective laser melting of pure copper. JOM. 2018;70:396–400. doi: 10.1007/s11837-017-2695-x
4.
ColopiM, CaprioL, DemirAG, Selective laser melting of pure Cu with a 1 kW single mode fiber laser. Proceedings of the 10th CIRP Conference on Photonic Technologies, (2018).
GuschlbauerR, OsmanlicF, KörnerC.Herausforderungen bei der Additiven Fertigung von Reinkupfer mit dem selektiven Elektronenstrahlschmelzen. Metall. 2017;71:459–462.
7.
MaoZ, ZhangDZ, WeiP, Manufacturing Feasibility and Forming properties of Cu-4Sn in selective laser melting. Materials (Basel). 2017;10:333–344. doi: 10.3390/ma10040333
8.
PoltzI, JürgensP, BlümM, Additive Fertigung von CuSn11 Werkstoffen mit selektivem Laserschmelzen (SLM). Metall. 2016;70:438–442.
9.
DoldE, KaiserE, PrickingS, Qualitativ hochwertige Kupferschweißungen durch grüne Hochleistungsdauerstrichlaser. Metall. 2018;72:457–459.
ZhaoDM, DongQM.Structure and strength of the age hardened Cu–Ni–Si alloy. Mater Chem Phys. 2003;79:81–86. doi: 10.1016/S0254-0584(02)00451-0
13.
MašekJ, KoutnýD, PopelaR.Thermal conductivity of Cu7.2Ni1.8Si1Cr copper alloy produced via SLM and ability of thin-wall structure fabrication. Proceedings of the Research and Education in Aircraft Design (READ) conference (2018), pp. 26–35.
14.
KlotzU, TibertoD, HeldF.Additive manufacturing of 18-karat yellow-gold alloys. Proceedings of the 30th Santa Fe Symposium, Albuquerque, New Mexico (2016), pp. 255-272.
15.
KlotzU, TibertoD, HeldF.Optimization of 18-karat yellow gold alloys for the additive manufacturing of jewelry and watch parts. Gold Bull. 2017;50(2):111–121. doi: 10.1007/s13404-017-0201-4
AmoreS, RicciE, LanataT, Surface tension and wetting behaviour of molten Cu-Sn alloys. J Alloys Compd. 2008;452:161–166. doi: 10.1016/j.jallcom.2007.01.178
18.
RicciE, BattezzatiL, BrooksR, Thermophysical properties of Cu-based industrial alloys in the liquid phase. High Temperatures-High Pressures. 2009;38:43–61.
19.
BowyerWH.The effects of impurities on the properties of OFP copper specified for the copper Iron Canister. Swedish Nuclear Power Inspectorate (SKI) Report 99:44 (1999) SKI Project Number 99099-, pp. 11.
20.
EustathopoulosN, NicholasMG, DrevetB.Wettability at high temperatures, Volume 3, Pergamon, Oxford OX5 1GB, pp. 154, 1999.
21.
HamaniMS, HamoudiDE, HafsaouiA.Effect of lead, silicon and aluminium on the properties of liquid copper. Asian Journal of Information Technology. 2007;6(1):68–72.
22.
AdachiM, SchickM, BrilloJ, Surface tension and density measurement of liquid Si–Cu binary alloys. Journal of Material Science. 2010;45:2002–2008. doi: 10.1007/s10853-009-4149-5
23.
BrilloJ, EgryI.Surface tension of nickel, copper, iron and their binary alloys. Proceedings of the IV international conference / High temperature and capillarity. Journal of Material Science. 2005;40:2213–2216. doi: 10.1007/s10853-005-1935-6
24.
VincentC, SilvainJF, HeintzJM, Effect of porosity on the thermal conductivity of copper processed by powder metallurgy. J Phys Chem Solids. 2012;73:499–504. doi: 10.1016/j.jpcs.2011.11.033
