Intermetallic TiAl alloys are new generation high-temperature material. However, extensive application of TiAl alloys is hindered by some disadvantages, especially the high processing cost. Currently, precision casting is an effective method to manufacture TiAl components with complex shape. However, the interfacial reaction between the TiAl alloy melt and mould affects the quality of the castings and hinders extensive applications of casting TiAl components. In this paper, the research status of mould materials for the casting of TiAl alloys is reviewed. Performances of present used mould materials are compared in details. Reaction mechanisms between mould materials and the melts of TiAl alloys are also summarised. Finally, the future development tendency and prospect are pointed out.
YangR.Advances and challenges of TiAl base alloys. Acta Metall Sin. 2015;151:129–147.
2.
KimY, KimS.Advances in gammalloy materials–processes–application technology: successes, dilemmas, and future. Jom-Us. 2018;70:553–560. doi: 10.1007/s11837-018-2747-x
3.
LiJ, ZhangT, ChangH, Resent achievements and future direction of TiAl-Based intermetallics compounds. Materials China. 2010;29:1–5.
4.
LinJ, ZhangL, SongX, Status of research and development of light-weight γ-TiAl intermetallics based compounds. Mater China. 2010;29:1–8.
5.
YangJ, ChenR, GuoJ, Research progress and prospect of high Nb containing TiAl alloys directional solidification. Rare Metal Mat Eng. 2016;45:1357–1363. doi: 10.1016/S1875-5372(17)30025-5
6.
LiuT, LuoL, WangL, Determination and infulencing of the primary phase in directionally solidified TiAl alloys. Rere Metal Mater Eng. 2017;46:2737–2743.
7.
SuY, LiuT, LiX, The evolution of seeding technique for the lamellar orientation controlling of γ-TiAl based alloys. Acta Metall Sin. 2018;54:647–656.
8.
JiaoZB, LuanJH, LiuCT.Strategies for improving ductility of ordered intermetallics. Prog Nat Sci Mater.2016;26:1–12. doi: 10.1016/j.pnsc.2016.01.014
9.
BewlayBP, NagS, SuzukiA, Tial alloys in commercial aircraft engines. Mater High Temp. 2016;33:1–11. doi: 10.1080/09603409.2016.1183068
10.
ClemensH, MayerS.Intermetallic titanium aluminides in aerospace applications–processing, microstructure and properties. Mater High Temp. 2016;33:560–570. doi: 10.1080/09603409.2016.1163792
11.
AppelF, ClemensH, FischerFD.Modeling concepts for intermetallic titanium aluminides. Prog Mater Sci. 2016;81:55–124. doi: 10.1016/j.pmatsci.2016.01.001
SuY, LiuT, LiX, Lamellar orientation control in directionally solidified TiAl intermetallics. China Foundry. 2014;11:219–231.
14.
NodaT.Application of cast gamma TiAl for automobiles. Intermetallics. 1998: 709–713. doi: 10.1016/S0966-9795(98)00060-0
15.
FuPX, KangXH, MaYC, Centrifugal casting of TiAl exhaust valves. Intermetallics. 2008;16:130–138. doi: 10.1016/j.intermet.2007.08.007
16.
TetsuiT.Manufacturing technology for gamma-TiAl alloy in current and future applications. Rare Metals. 2011;30:294–299. doi: 10.1007/s12598-011-0288-3
17.
GuntlinR, AguilJ, KättlitzO, State of the art developments in investment casting of TiAl components for the new generation of aero-Engines). 13th World conference on investment casting; Japan, Kyoto, 2012. p.1–7.
18.
ChenY, JiaY, XiaoS, Review of the investment casting of TiAl-based intermetallics alloys. Acta Metall Sin. 2013;49:1281–1285. doi: 10.3724/SP.J.1037.2013.00536
19.
SuiY, ChengC, FengK, Research and prospects of interfacial reaction between TiAl alloys melt and mold during direction solidification. Mater Sci Technol (China). 2016;24:91–96.
20.
WangM, SunJ, ChenZ.Current status on melting and casting process of gamma TiAl based alloys. Titanium Ind Prog. 2010;27:1–4.
21.
WangQ, ChenR, GongX, Microstructure, mechanical properties, and crack propagation behavior in high-Nb TiAl alloys by directional solidification. Metall Mater Trans A. 2018;49:4555–4564. doi: 10.1007/s11661-018-4765-2
22.
BarbosaJ, PugaH, RibeiroCS, Characterisation of metal-mould interface on investment casting of γ-TiAl. Int J Cast Metal Res. 2006;19:331–338. doi: 10.1179/136404606X163497
23.
KuangJP, HardingRA, CampbellJ.Investigation into refractories as crucible and mould materials for melting and casting γ-TiAl alloys. Mater Sci Tech. 2000;16:1007–1016. doi: 10.1179/026708300101508964
24.
KuangJP, HardingRA, CampbellJ.A study of refractories as crucible and mould materials for melting and casting gamma-TiAl alloys. Int J Cast Metal Res. 2001;13:277–292. doi: 10.1080/13640461.2001.11819409
25.
ZhangX, ZhaoY, BaiC.Applicatons of titanium and titanium alloys. 21–165; 2005, Beijing, Chemical Industry Press.
26.
WangJ, WangJ, YangJ.Interface reaction of TiAl based alloy with some ceramic materials. Spec Cast Nonferrours Alloys. 2002;22:40–42.
27.
SuY, GuoJ, JiaJ.Contamination of mold materials on TiAl castings. J Aeronaut Mater. 1999;19:11–15.
28.
LiuA, LiB, NanH, Study of interfacial reaction between TiAl alloys and four ceramic molds. Rare Metal Mat Eng. 2008;37:956–959. doi: 10.1016/S1875-5372(10)60002-1
29.
LinX, XueX, ZhongH, Interface reaction between ceramic moulds and high Nb-TiAl alloys. Rare Metal Mat Eng. 2013;42:1568–1571. doi: 10.1016/S1875-5372(13)60091-0
30.
FanJ, LiuJ, WuS, Microstructure formation and interface characteristics of directionally solidified TiAl-Si alloys in alumina crucibles with a new Y2O3 skull-aided technology. Sci Rep-Uk. 2017;7:45198 (1-9).
31.
FanJ, GuoJ, WangS, Microstructure evolution and interfacial reaction of TiAl–Si alloy solidified in alumina crucible. Mater Sci Technol. 2015;31:1727–1734. doi: 10.1179/1743284714Y.0000000748
32.
MaY, WangW, ChenB, Interface reaction between ceramic moulds and Ti46Al1B As-cast Valves. Acta Metall Sin. 2009;45:369–373.
33.
HeJ, WeiC, WangS, Bazro3 refractory applied to the directional solidification of TiAl alloys. IOP Conf Ser: Mater Sci Eng. 2016;117:12033. doi: 10.1088/1757-899X/117/1/012033
34.
HeJ, ZhouH, ZhuW, Development of refractories used in investment casting and directional solidification of TiAl alloys. Mater Rev. 2014;28:87–92.
35.
SungS, KimY.Alpha-case formation mechanism on titanium investment castings. Mater Sci Eng A. 2005;405:173–177. doi: 10.1016/j.msea.2005.05.092
36.
SungS, KimY.Economic net-shape forming of TiAl alloys for automotive parts. Intermetallics. 2006;14:1163–1167. doi: 10.1016/j.intermet.2005.11.025
37.
ZhangH, TangX, ZhouC, Comparison of directional solidification of γ-TiAl alloys in conventional Al2O3 and novel Y2O3-coated Al2O3 crucibles. J Eur Ceram Soc. 2013;33:925–934. doi: 10.1016/j.jeurceramsoc.2012.11.006
38.
LuoW, ShenJ, MinZ, Investigation of interfacial reactions between TiAl alloy and crucible materials during directional solidification process. Rare Metal Mat Eng. 2009;38:1441–1445.
39.
LapinJ, OndrúšL.Formation of ceramic particles in intermetallic Ti-46Al-2W-0.5Si alloy during directional solidification. Kovové Materialy. 2002;40:161–170.
40.
LapinJ, OndrúšL, BajanaO.Effect of Al2O3 particles on mechanical properties of directionally solidified intermetallic Ti-46Al-2W-0.5Si alloy. Mater Sci Eng A. 2003;360:85–95. doi: 10.1016/S0921-5093(03)00445-3
41.
JiaQ, CuiYY, YangR.A study of two refractories as mould materials for investment casting TiAl based alloys. J Mater Sci. 2006;41:3045–3049. doi: 10.1007/s10853-006-6785-3
42.
ChenY, NiuH, TianJ, Interfacial reaction between Ti-47Al-2Cr-2Nb-xTiB2 alloys and Al2O3 ceramic molds. Spec Cast Nonferrous Alloys. 2010;30:197–200.
43.
FruehC, PoirierDR, MaguireMC, Attempts to develop a ceramic mould for titanium casting – a review. Int J Cast Metal Res. 1996;9:233–239. doi: 10.1080/13640461.1996.11819664
44.
GomesF, BarbosaJ, RibeiroCS.Induction melting of γ-TiAl in CaO crucibles. Intermetallics. 2008;16:1292–1297. doi: 10.1016/j.intermet.2008.08.008
45.
ChenY, ChenY, TianJ, Interfacial reactions between TiAl alloys and ZrO2 mould under centrifugal investment casting conditions. Chin J Nonferrours Metals. 2010;20:198–202. doi: 10.1016/S1003-6326(10)60039-8
46.
CuiR, CaoM, ZhangH, Interactions between TiAl alloys and yttria refractory material in casting process. J Mater Process Tech. 2010;210:1190–1196. doi: 10.1016/j.jmatprotec.2010.03.003
47.
TetsuiT, KobayashiT, UenoT, Consideration of the influence of contamination from oxide crucibles on TiAl cast material, and the possibility of achieving low-purity TiAl precision cast turbine wheels. Intermetallics. 2012;31:274–281. doi: 10.1016/j.intermet.2012.07.019
48.
LapinJ, GabalcováZ, PelachováT.Effect of Y2O3 crucible on contamination of directionally solidified intermetallic Ti-46Al-8Nb alloy. Intermetallics. 2011;19:396–403. doi: 10.1016/j.intermet.2010.11.007
49.
BarbosaJ, RibeiroCS, MonteiroAC.Influence of superheating on casting of γ-TiAl. Intermetallics. 2007;15:945–955. doi: 10.1016/j.intermet.2006.11.004
50.
YuanS, TangX, ZhangH.Interface reaction between Ti-47Al-2Cr-2Nb alloy melt and Y2O3 shell mold. Spec Cast Nonferrours Alloys. 2010;30:593–596.
51.
LinB, LiuR, JiaQ, Effect of yttria inclusion on room temperature tensile properties of investment cast TiAl. Mater Sci Eng A. 2018;712:73–79. doi: 10.1016/j.msea.2017.11.100
52.
ZhangH, DingH, WangQ, Microstructures and tensile properties of directionally solidified Ti-45Al-2Cr-2Nb alloy by electromagnetic cold crucible zone melting technology with Y2O3 moulds. Vacuum. 2018;148:206–213. doi: 10.1016/j.vacuum.2017.11.032
53.
YuanC, ComptonD, ChengX, The influence of polymer content and sintering temperature on yttria face-coat moulds for TiAl casting. J Eur Ceram Soc. 2012;32:4041–4049. doi: 10.1016/j.jeurceramsoc.2012.06.010
54.
KostovB, FriedrichA.Selection of crucible oxides in molten titanium and titanium aluminum alloys by thermo-chemistry calculations. J Min Met. 2005;41B:113–125. doi: 10.2298/JMMB0501113K
55.
ChengX, YuanC, BlackburnS, The influence of ZrO2 concentration in an yttria-Based face coat for investment casting a Ti-45Al-2Mn-2Nb-0.2TiB alloy using a sessile drop method. Metall Mater Trans A. 2015;46:1328–1336. doi: 10.1007/s11661-014-2724-0
56.
ChengX, YuanC, BlackburnS, Influence of Al2O3 concentration in yttria based face coats for investment casting Ti-45Al-2Mn-2Nb-0.2TiB alloy. Mater Sci Tech. 2014;30:1758–1764. doi: 10.1179/1743284713Y.0000000467
57.
CuiY, LiuD, ChaiL, Interface reactions between TiAl alloys and diacetatozirconic acid-yttria molds differentiated by ammonium metatungstate addition. Rare Met. 2017, doi:10.1007/s12598-016-0875-4.
58.
CuiY, TangX, GaoM, Interreaction between TiAl alloy and diacetatozirconic Acid-bonded yttria mould under high-temperature and long-Trem. Rare Metal Mater Eng. 2012;41:1171–1175.
59.
TetsuiT, KobayashiT, MoriT, Evaluation of yttria applicability as a crucible for induction melting of TiAl alloy. Mate R Trans. 2010;51:1656–1662. doi: 10.2320/matertrans.MAW201002
60.
HolcombeCE, SerandosTR.Consideration of yttria for vacuum induction melting of titanium. Metall Trans B. 1983;14:497–499. doi: 10.1007/BF02654371
61.
ZhangH, GaoM, TangX, Interaction between Ti-47Al-2Cr-2Nb alloy and Y2O3 ceramic during directional solidification. Acta Metall Sin. 2010;46:890–896. doi: 10.3724/SP.J.1037.2010.00890
62.
FanJ, LiuJ, TianS, Effect of solidification parameters on microstructural characteristics and mechanical properties of directionally solidified binary TiAl alloy. J Alloys Compd. 2015;650:8–14. doi: 10.1016/j.jallcom.2015.05.160
63.
FanJ, ZhangC, WuS, Effects of solidification parameters on the growth direction of α phase in directionally solidified Ti-49Al alloy. Intermetallics. 2017;90:113–118. doi: 10.1016/j.intermet.2017.07.008
64.
KartavykhAV, TcherdyntsevVV, ZollingerJ.Tial–Nb melt interaction with AlN refractory crucibles. Mater Chem Phys. 2009;116:300–304. doi: 10.1016/j.matchemphys.2009.03.032
65.
KartavykhAV, CherdyntsevVV.Chemical compatibility of a TiAl-Nb melt with oxygen-free crucible ceramics made of aluminum nitride. Russian Metallurgy (Metally). 2008: 491–499. doi: 10.1134/S0036029508060074
LiuX, LiuF, DuH, Effect of hydrogen on interfacial reaction between TiAl alloy melt and graphite mold. Intermetallics. 2014;53:107–111. doi: 10.1016/j.intermet.2014.04.007
68.
HeJ, WeiC, LiM, Interface reaction between BaZrO3 refractory and melted TiAl alloys. Chin J Nonferrous Met. 2015;25:1505–1511. doi: 10.1016/S1003-6326(15)63997-8
69.
KimM, KimSK, KimY.Effect of mold material and binder on metal-mold interfacial reaction for investment castings of titanium alloys. Mate R Trans. 2002;43:745–750. doi: 10.2320/matertrans.43.745
70.
LiCH, GaoYH, LuXG, Interaction between the Ceramic CaZrO3 and the melt of titanium alloys. Adv Sci Technol. 2010;70:136–140. doi: 10.4028/www.scientific.net/AST.70.136
71.
YuanC, ChengX, WitheyPA.Investigation into the use of CaZrO3 as a facecoat material in the investment casting of TiAl alloys. Mater Chem Phys. 2015;155:205–210. doi: 10.1016/j.matchemphys.2015.02.026
72.
LiC, LiM, ZhangH, Fabrication of Y2O3 doped BaZrO3 coating on Al2O3 applied to solidification of titanium alloy. Surf Coat Technol. 2017;320:146–152. doi: 10.1016/j.surfcoat.2017.01.079
73.
ChenG, GaoP, KangJ, Improved stability of BaZrO3 refractory with Y2O3 additive and its interaction with titanium melts. J Alloys Compd. 2017;726:403–409. doi: 10.1016/j.jallcom.2017.07.270
74.
LiK, ChenG, ZhangH, Microstructure evolution of directionally solidified Ti-46Al-8Nb alloy in the BaZrO3-based mould. Mater Res Express. 2018;5:116529. doi: 10.1088/2053-1591/aadf0e
75.
ZhangZ, ZhuK, LiuL, Preparation of BaZrO3 crucible and its interfacial reaction with molten titanium alloys. J Chin Ceram Soc. 2013;41:1278–1283.
