Reheating treatments for as-cast Al-Nb-containing steel were examined at temperatures correlating to the predicted dissolution temperatures of the precipitates present in the interdendritic and dendritic regions. Bimodal grain growth was observed in this steel when reheated in the range 1160–1200°C as Nb-rich particles remaining in the interdendritic region prevented further growth of grains originating from the dendritic region when the pinning precipitates of AlN dissolved. The isolated abnormally large grain structure seen for the homogenised condition from previous work was not observed in the as-cast Al-Nb steel under any conditions. It is suggested that elemental segregation (particularly for Nb) plays a role in providing a spatially distributed (banded) pinning effect on the large grains growing from the dendritic regions.
DavisC.The effect of microalloy precipitates on final product mechanical properties. Trans Indian Inst Met. 2006;59(5):695–710.
6.
BhattacharjeeD, DavisC, KnottJ.Predictability of Charpy impact toughness in thermomechanically control rolled (TMCR) microalloyed steels. Ironmak Steelmak. 2003;30(3):249–255.
7.
ChakrabartiD, StrangwoodM, DavisC.Effect of bimodal grain size distribution on scatter in toughness. Metall Mater Trans A. 2009;40(4):780–795.
8.
KunduA, DavisC, StrangwoodM.Grain size distributions after single hit deformation of a segregated, commercial Nb-containing steel: prediction and experiment. Metall Mater Trans A. 2011;42(9):2794–2806.
9.
ParkSH, KimSH, KimYM, Improving mechanical properties of extruded Mg–Al alloy with a bimodal grain structure through alloying addition. J Alloys Compd. 2015;646(2):932–936.
10.
RoyS.Effect of microalloy precipitates on austenite grain growth during reheating treatment of HSLA steel [PhD thesis]. Kharapur: Indian Institute of Technology; 2013.
11.
WuS, DavisC.Effect of duplex ferrite grain size distribution on local fracture stresses of Nb-microalloyed steels. Mater Sci Eng: A. 2004;387:456–460.
12.
ChakrabartiD, DavisCL, StrangwoodM.Characterisation of bimodal grain structures and their dependence on inhomogeneous precipitate distribution during casting. Mater Sci Forum. 2005;500-501:613–622. Trans Tech Publ.
13.
ChakrabartiD, DavisC, StrangwoodM.Characterisation of bimodal grain structures in HSLA steels. Mater Charact. 2007;58(5):423–438.
14.
ChakrabartiD.Development of bimodal grain structures and their effect on toughness in HSLA steel [PhD thesis]. Birmingham: University of Birmingham; 2007.
15.
ChakrabartiD, DavisC, StrangwoodM.Development of bimodal grain structures in Nb-containing high-strength low-alloy steels during slab reheating. Metall Mater Trans A. 2008;39(8):1963–1977.
16.
ChakrabartiD, DavisC, StrangwoodM.The effect of precipitate distributions on HSLA grain structures). International Symposium of research Students on material Science and Engineering December; 2004.p. 20–22.
17.
ZhengS, DavisC, StrangwoodM.Elemental segregation and subsequent precipitation during solidification of continuous cast Nb–V–Ti high-strength low-alloy steels. Mater Charact. 2014;95:94–104.
18.
SoleckaM, KopiaA, RadziszewskaA, Microstructure, microsegregation and nanohardness of CMT clad layers of Ni-base alloy on 16Mo3 steel. J Alloys Compd. 2018;751:86–95.
19.
CuddyLJ, RaleyJC.Austenite grain coarsening in microalloyed steels. Metall Trans A. 1983;14(10):1989–1995.
20.
DanonA, ServantC, AlamoA, Heterogeneous austenite grain growth in 9Cr martensitic steels: influence of the heating rate and the austenitization temperature. Mater Sci Eng A. 2003;348(1):122–132.
21.
EnloeCM, FindleyKO, SpeerJG.Austenite grain growth and precipitate evolution in a carburizing steel with combined niobium and molybdenum additions. Metall Mater Trans A. 2015;46(11):5308–5328.
22.
FloresO, MartinezL.Abnormal grain growth of austenite in a V–Nb microalloyed steel. J Mater Sci. 1997;32(22):5985–5991.
23.
KarmakarA, KunduS, RoyS, Effect of microalloying elements on austenite grain growth in Nb–Ti and Nb–V steels. Mater Sci Technol. 2014;30(6):653–664.
24.
RudnizkiJ, ZeislmairB, PrahlU, Prediction of abnormal grain growth during high temperature treatment. Comp Mater Sci. 2010;49(2):209–216.
25.
ZhangX.Research on abnormal grain growth in reversely transformed austenite structure. [PhD's thesis]. Sanpporo, Hokkaido, Japan: Hokkaido University; 2014.
26.
ZhangX, MatsuuraK, OhnoM.Abnormal grain growth in austenite structure Reversely transformed from ferrite/pearlite-banded structure. Metall Mater Trans A. 2014;45(10):4623–4634.
27.
ZhouTH, ZurobHS.Abnormal and post-abnormal austenite grain growth kinetics in Nb–Ti microalloyed steels. Can Metall Quart. 2011;50(4):389–395.
28.
FernándezJ, IllescasS, GuilemanyJ.Effect of microalloying elements on the austenitic grain growth in a low carbon HSLA steel. Mater Lett. 2007;61(11):2389–2392.
29.
HillertM.On the theory of normal and abnormal grain growth. Acta Metall. 1965;13(3):227–238.
WangF, DavisC, StrangwoodM.Grain growth behaviour on reheating Al–Nb-containing steel in the homogenised condition. Mater Sci Technol. 2018;34(5):587–595.
32.
FengR, LiS, ZhuX, Microstructural characterization and formation mechanism of abnormal segregation band of hot rolled ferrite/pearlite steel. J Alloys Compd. 2015;646:787–793.
33.
WonY-M, ThomasBG.Simple model of microsegregation during solidification of steels. Metall Mater Trans A. 2001;32(7):1755–1767.
34.
ZhangD.Characterisation and modelling of segregation in continuously cast steel slab [PhD thesis]. Birmingham: University of Birmingham; 2015.
35.
ZhangD, StrangwoodM.Characterisation and modelling of microsegregation in low carbon continuously cast steel slab. Proceedings of the 2013 International Symposium on liquid Metal Processing & casting; 2013. p. 321–327.
36.
KunduA.Grain structure development during casting, reheating and deformation of Nb-microalloyed steel [PhDs thesis]. Birmingham: University of Birmingham; 2011.
