Grain size development during reheating is important to the mechanical properties of steels, and non-uniform grain growth including abnormal and bimodal grain growth are undesirable for steel manufacturing. In this paper, reheating treatments for Al–Nb-containing steel (0.057 wt-% Al and 0.019 wt-% Nb) were selected based on Thermo-Calc predictions for the dissolution temperatures of precipitates in the steel for a fully homogenised condition. Abnormal grain growth occurred in the homogenised Al–Nb sample during reheating, associated with random dissolution of the grain boundary-pinning AlN precipitates, while bimodal grain growth was not observed. So material in a homogenised condition would not be expected to provide a fully uniform grain structure during reheating treatment.
DavisC.The effect of microalloy precipitates on final product mechanical properties. T Indian I Metals. 2006;59:695–710.
2.
KorchynskyM.Advanced metallic structural materials and a new role for microalloyed steels. Mater Sci Forum. 2005;500–501:471–480. doi: 10.4028/www.scientific.net/MSF.500-501.471
3.
LittleE.The physical metallurgy of microalloyed steels. Mater Sci Technol. 2000;16(7/8):941.
VervyncktS, VerbekenK, LopezB, Modern HSLA steels and role of non-recrystallisation temperature. Int Mater Rev. 2012;57(4):187–207. doi: 10.1179/1743280411Y.0000000013
6.
BhattacharjeeD, DavisC, KnottJ.Predictability of Charpy impact toughness in thermomechanically control rolled (TMCR) microalloyed steels. Ironmak Steelmak. 2003;30(3):249–255. doi: 10.1179/030192303225003908
7.
KunduA, DavisC, StrangwoodM.Grain size distributions after single hit deformation of a segregated, commercial Nb-containing steel: prediction and experiment. Metall Mater Trans A. 2011;42(9):2794–2806. doi: 10.1007/s11661-011-0712-1
8.
ZhouTH, ZurobHS.Abnormal and post-abnormal austenite grain growth kinetics in Nb–Ti microalloyed steels. Can Metall Quart. 2011;50(4):389–395. doi: 10.1179/1879139511Y.0000000002
9.
RudnizkiJ, ZeislmairB, PrahlU, Prediction of abnormal grain growth during high temperature treatment. Comp Mater Sci. 2010;49(2):209–216. doi: 10.1016/j.commatsci.2010.04.015
10.
FloresO, MartinezL.Abnormal grain growth of austenite in a V–Nb microalloyed steel. J Mater Sci. 1997;32:5985–5991. doi: 10.1023/A:1018667111981
11.
DanonA, ServantC, AlamoA, Heterogeneous austenite grain growth in 9Cr martensitic steels: influence of the heating rate and the austenitization temperature. Mater Sci Eng A. 2003;348(1):122–132. doi: 10.1016/S0921-5093(02)00632-9
12.
KarmakarA, KunduS, RoyS, Effect of microalloying elements on austenite grain growth in Nb–Ti and Nb–V steels. Mater Sci Technol. 2014;30(6):653–664. doi: 10.1179/1743284713Y.0000000386
13.
EnloeCM, FindleyKO, SpeerJG.Austenite grain growth and precipitate evolution in a carburizing steel with combined niobium and molybdenum additions. Metall Mater Trans A. 2015;46(11):5308–5328. doi: 10.1007/s11661-015-3103-1
14.
ZhangX, MatsuuraK, OhnoM.Abnormal grain growth in austenite structure reversely transformed from ferrite/pearlite-banded structure. Metall Mater Trans A. 2014;45(10):4623–4634. doi: 10.1007/s11661-014-2364-4
15.
CuddyLJ, RaleyJC.Austenite grain coarsening in microalloyed steels. Metall Trans A. 1983;14(10):1989–1995. doi: 10.1007/BF02662366
16.
PalmiereE, GarciaC, De ArdoA.Compositional and microstructural changes which attend reheating and grain coarsening in steels containing niobium. Metall Mater Trans A. 1994;25(2):277–286. doi: 10.1007/BF02647973
17.
MartínDS, CaballeroFG, CapdevilaC, Austenite grain coarsening under the influence of niobium carbonitrides. Mater Trans. 2004;45(9):2797–2804. doi: 10.2320/matertrans.45.2797
18.
FernándezJ, IllescasS, GuilemanyJ.Effect of microalloying elements on the austenitic grain growth in a low carbon HSLA steel. Mater Lett2007;61(11):2389–2392. doi: 10.1016/j.matlet.2006.09.021
19.
HillertM.On the theory of normal and abnormal grain growth. Acta Metall. 1965;13(3):227–238. doi: 10.1016/0001-6160(65)90200-2
ChakrabartiD.Development of bimodal grain structures and their effect on toughness in HSLA steel [PhD's thesis]. University of Birmingham, Birmingham, UK; 2007.
22.
ChakrabartiD, DavisC, StrangwoodM.The effect of precipitate distributions on HSLA grain structures. International Symposium of Research Students on Material Science and Engineering December, 2004. p. 20–22.
23.
ChakrabartiD, DavisC, StrangwoodM.Characterisation of bimodal grain structures in HSLA steels. Mater Charact. 2007;58(5):423–438. doi: 10.1016/j.matchar.2006.06.014
24.
ChakrabartiD, DavisC, StrangwoodM.Development of bimodal grain structures in Nb-containing high-strength low-alloy steels during slab reheating. Metall Mater Trans A. 2008;39(8):1963–1977. doi: 10.1007/s11661-008-9535-0
25.
ChakrabartiD, DavisCL, StrangwoodM.Characterisation of bimodal grain structures and their dependence on inhomogeneous precipitate distribution during casting. Mater Sci Forum. 2005;500-501:613–622. doi: 10.4028/www.scientific.net/MSF.500-501.613
26.
ChakrabartiD, StrangwoodM, DavisC.Effect of bimodal grain size distribution on scatter in toughness. Metall Mater Trans A. 2009;40(4):780–795. doi: 10.1007/s11661-009-9794-4
27.
KunduA.Grain structure development during casting, reheating and deformation of Nb-microalloyed steel [PhD's thesis]. University of Birmingham, Birmingham, UK; 2011.
