In the present work, a systematic investigation of crystallographic texture evolution and strain hardening behaviour was undertaken to comprehend the deformation behaviour in the presence of T1 (Al2CuLi) precipitates. Characteristic texture components symbolising multiple slip condition such as Copper and S were observed upon rolling which is in contrast with other Al alloys containing shearable precipitates. Strain hardening ability was also observed to be remarkably high in the presence of T1 precipitates. The texture and strain hardening results are compared with another age hardenable Al alloy (Al–Mg–Si alloy) containing shearable precipitates to clearly bring out the difference in the nature of T1 precipitates.
RiojaRJ, LiuJ.The evolution of Al-Li base products for aerospace and space applications. Metall Mater Trans A. 2012;43(9):3325–3337. doi: 10.1007/s11661-012-1155-z
2.
GiummarraC, ThomasB, RiojaRJ, editors. New aluminum lithium alloys for aerospace applications. Proceedings of the light metals technology conference; 2007.
3.
RodgersB, PrangnellP.Quantification of the influence of increased pre-stretching on microstructure-strength relationships in the Al–Cu–Li alloy AA2195. Acta Mater. 2016;108:55–67. doi: 10.1016/j.actamat.2016.02.017
4.
DorinT, De GeuserF, LefebvreW, Strengthening mechanisms of T1 precipitates and their influence on the plasticity of an Al–Cu–Li alloy. Mater. Sci Eng A. 2014;605:119–126. doi: 10.1016/j.msea.2014.03.024
5.
DeschampsA, DecreusB, De GeuserF, The influence of precipitation on plastic deformation of Al–Cu–Li alloys. Acta Mater. 2013;61(11):4010–4021. doi: 10.1016/j.actamat.2013.03.015
6.
DorinT, DeschampsA, GeuserFD, Quantification and modelling of the microstructure/strength relationship by tailoring the morphological parameters of the T1 phase in an Al–Cu–Li alloy. Acta Mater. 2014;75(Supplement C):134–146. doi: 10.1016/j.actamat.2014.04.046
7.
NieJF, MuddleBC, PolmearIJ, editors. The effect of precipitate shape and orientation on dispersion strengthening in high strength aluminium alloys. Materials Science Forum; 1996: Trans Tech Publ.
8.
CsontosAA, StarkeEA.The effect of inhomogeneous plastic deformation on the ductility and fracture behavior of age hardenable aluminum alloys. Int J Plast. 2005;21(6):1097–1118. doi: 10.1016/j.ijplas.2004.03.003
9.
NieJF, MuddleBC.On the form of the age-hardening response in high strength aluminium alloys. Mater Sci Eng A. 2001;319-321:448–451. doi: 10.1016/S0921-5093(01)01054-1
10.
Poole*W, WangX, LloydD, The shearable–non-shearable transition in Al–Mg–Si–Cu precipitation hardening alloys: implications on the distribution of slip, work hardening and fracture. Philos Mag. 2005;85(26–27):3113–3135. doi: 10.1080/14786430500154935
11.
ChengL, PooleW, EmburyJ, The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA7030. Metall Mater Trans A. 2003;34(11):2473–2481. doi: 10.1007/s11661-003-0007-2
12.
LeffersT, RayRK.The brass-type texture and its deviation from the copper-type texture. Prog Mater Sci. 2009;54(3):351–396. doi: 10.1016/j.pmatsci.2008.09.002
13.
ZhouY, TóthLS, NealeKW.On the stability of the ideal orientations of rolling textures for F.C.C. polycrystals. Acta Metall Mater. 1992;40(11):3179–3193. doi: 10.1016/0956-7151(92)90481-S
14.
LeffersT.Computer simulation of the plastic deformation in face-centred cubic polycrystals and the rolling texture derived. Phys Status Solidi. 1968;25(1):337–344. doi: 10.1002/pssb.19680250133
15.
TaylorGI.Plastic strain in metals. J Inst Met. 1938;62:307–324.
16.
BishopJ, HillR.CXXVIII. A theoretical derivation of the plastic properties of a polycrystalline face-centred metal. Lond Edinb Dublin Philos Mag J Sci. 1951;42(334):1298–1307. doi: 10.1080/14786444108561385
17.
EnglerO.Deformation and texture of copper–manganese alloys. Acta Mater. 2000;48(20):4827–4840. doi: 10.1016/S1359-6454(00)00272-X
18.
ToméC.Lebensohn R. VPSC 7b–User manual. 2007.
19.
MadecR, DevincreB, KubinL.Simulation of dislocation patterns in multislip. Scr Mater. 2002;47(10):689–695. doi: 10.1016/S1359-6462(02)00185-9
20.
MeckingH, KocksU.Kinetics of flow and strain-hardening. Acta Metall. 1981;29(11):1865–1875. doi: 10.1016/0001-6160(81)90112-7
21.
KocksU, MeckingH.Physics and phenomenology of strain hardening: the FCC case. Prog Mater Sci. 2003;48(3):171–273. doi: 10.1016/S0079-6425(02)00003-8
22.
KhadykoM, DumoulinS, CailletaudG, Latent hardening and plastic anisotropy evolution in AA6060 aluminium alloy. Int J Plast. 2016;76:51–74. doi: 10.1016/j.ijplas.2015.07.010
23.
StoudtMR, RickerRE.The relationship between grain size and the surface roughening behavior of Al-Mg alloys. Metall Mater Trans A. 2002;33(9):2883–2889. doi: 10.1007/s11661-002-0273-4
24.
Chapter 2 microstructure and mechanical properties of materials. Tribol Ser. 1987;10:8–47. doi: 10.1016/S0167-8922(08)70720-X
