In this study, an approach is proposed to improve the microstructure and mechanical properties of Mg-4Zn-0.5Zr alloy by combining trace Cu and rare earth Ce addition. The results showed that Cu and Ce additions led to obvious grain refinement and the formation of Mg-Zn-Cu and Mg-Zn-Ce phases. The Mg-Zn-Ce phase was identified to have an orthorhombic structure. The length of the [0001]α rods in the Cu-containing alloys remarkably decreased. The yield strength increased slightly after Cu and Ce co-addition, which was attributed to grain refinement and precipitation strengthening. The coarse Mg-Zn-Ce phase distributed at the grain boundaries would reduce the ductility by promoting crack propagation during tensile processes.
DuYZ, ZhengMY, QiaoXG, Effect of La addition on the microstructure and mechanical properties of Mg-6 wt% Zn alloys. Mater Sci Eng A. 2016;673:47–54. doi: 10.1016/j.msea.2016.07.022
2.
LiuLZ, ChenXH, PanFS, Microstructure, texture, mechanical properties and electromagnetic shielding effectiveness of Mg-Zn-Zr-Ce alloys. Mater Sci Eng A. 2016;669:259–268. doi: 10.1016/j.msea.2016.05.098
3.
QiuX, YangQ, CaoZY, Microstructure and mechanical properties of Mg-Zn-(Nd)-Zr alloys with different extrusion processes. Rare Met. 2016;35:841–849. doi: 10.1007/s12598-016-0797-1
4.
YanBS, DongXP, MaR, ‘Effects of heat treatment on microstructure, mechanical properties and damping capacity of Mg-Zn-Y-Zr alloy. Mater Sci Eng A. 2014;594:168–177. doi: 10.1016/j.msea.2013.11.019
5.
HeSM, PengLM, ZengXQ, Comparison of the microstructure and mechanical properties of a ZK60 alloy with and without 1.3 wt.% gadolinium addition. Mater Sci Eng A. 2006;433:175–181. doi: 10.1016/j.msea.2006.06.063
6.
DuYZ, QiaoXG, ZhengMY, Effect of microalloying with Ca on the microstructure and mechanical properties of Mg-6 mass%Zn alloys. Mater Des. 2016;98:285–293. doi: 10.1016/j.matdes.2016.03.025
7.
ChengRJ, PanFS, YangMB, Effects of various Mg-Sr master alloys on microstructural refinement of ZK60 magnesium alloy. Trans Nonferr Met Soc. 2008;18:S50–S54. doi: 10.1016/S1003-6326(10)60173-2
8.
ParkSH, YuH, KimHS, Effect of Cu addition on the microstructure and mechanical properties of an as-extruded ZK60 alloy. Korean J Met Mater. 2013;51:169–179. doi: 10.3365/KJMM.2013.51.3.169
9.
BuhaJ.Characterisation of precipitates in an aged Mg-Zn-Ti alloy. J Alloys Compd. 2009;472:171–177. doi: 10.1016/j.jallcom.2008.05.019
10.
LiuLZ, ChenXH, PanFS, Effect of Y and Ce additions on microstructure and mechanical properties of Mg-Zn-Zr alloys. Mater Sci Eng A. 2015;644:247–253. doi: 10.1016/j.msea.2015.07.065
11.
LiQ, WangQD, WangYX, Effect of Nd and Y addition on microstructure and mechanical properties of as-cast Mg-Zn-Zr alloy. J Alloys Compd. 2007;427:115–123. doi: 10.1016/j.jallcom.2006.02.054
12.
BuzolinRH, MohedanoM, MendisCL, As cast microstructures on the mechanical and corrosion behaviour of ZK40 modified with Gd and Nd additions. Mater Sci Eng A. 2017;682:238–247. doi: 10.1016/j.msea.2016.11.022
13.
XuCX, WangX, ZhangJS, Effect of Nd and Yb on the microstructure and mechanical properties of Mg-Zn-Zr alloy. Rare Met Mater Eng. 2014;43:1809–1814. doi: 10.1016/S1875-5372(14)60136-3
14.
LiuLZ, ChenXH, PanFS, A new high-strength Mg-Zn-Ce-Y-Zr magnesium alloy. J Alloys Compd. 2016;688:537–541. doi: 10.1016/j.jallcom.2016.07.144
15.
DuYZ, QiaoXG, ZhengMY, Development of high-strength, low-cost wrought Mg-2.5 mass% Zn alloy through micro-alloying with Ca and La. Mater Des. 2015;85:549–557. doi: 10.1016/j.matdes.2015.07.029
16.
DuYZ, ZhengMY, QiaoXG, Microstructure and mechanical properties of Mg-Zn-Ca-Ce alloy processed by semi-continuous casting. Mater Sci Eng A. 2013;582:134–139. doi: 10.1016/j.msea.2013.06.027
17.
QinB, YuWB, LiFP, Effects of Yb and Ca additions on microstructure of Mg-6Zn alloys. Foundry. 2010;59:886–890.
18.
OhGY, JungYG, YangW, Investigation of thermal conductivity and mechanical properties of Mg-4Zn-0.5Ca-xY Alloys. Mater Trans. 2015;56:1887–1892. doi: 10.2320/matertrans.M2015304
19.
OhJC, OhkuboT, MukaiT, TEM and 3DAP characterization of an age-hardened Mg-Ca-Zn alloy. Scr Mater. 2005;53:675–679. doi: 10.1016/j.scriptamat.2005.05.030
20.
MendisCL, Oh-ishiK, HonoK.Enhanced age hardening in a Mg-2.4 at.% Zn alloy by trace additions of Ag and Ca. Scr Mater. 2007;57:485–488. doi: 10.1016/j.scriptamat.2007.05.031
ZhuHM, ShaG, LiuJW, Microstructure and mechanical properties of Mg-6Zn-xCu-0.6Zr (wt.%) alloys. J Alloys Compd. 2011;509:3526–3531. doi: 10.1016/j.jallcom.2010.12.165
23.
YuH, KimYM, YouBS, Effects of cerium addition on the microstructure, mechanical properties and hot workability of ZK60 alloy. Mater Sci Eng A. 2013;559:798–807. doi: 10.1016/j.msea.2012.09.026
24.
ChinoY, KadoM, MabuchiM.Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2 wt%(0.035 at%)Ce. Mater Sci Eng A. 2008;494:343–349. doi: 10.1016/j.msea.2008.04.059
EastonM, StJohnD.Grain refinement of aluminum alloys: part I. The nucleant and salute paradigms - A review of the literature. Metall Mater Trans A. 1999;30:1613–1623. doi: 10.1007/s11661-999-0098-5
27.
WeiLY, DunlopGL, WestengenH.The intergranular microstructure of cast Mg-Zn and Mg-Zn-rare earth alloys. Metall Mater Trans A. 1995;26:1947–1955. doi: 10.1007/BF02670666
28.
YangWP, GuoXF, LuZX.TEM microstructure of rapidly solidified Mg-6Zn-1Y-1Ce alloy. Trans Nonferr Met Soc. 2012;22:786–792. doi: 10.1016/S1003-6326(11)61246-6
29.
HildebrandZ., QianM., StJohnD. and FrostM.: ‘Influence of zinc on the soluble zirconium content in magnesium and the subsequent grain refinement by zirconium’, Symposium on Magnesium Technology 2004, Charlotte, NC, March 2004, 241-245.
30.
RenYP, GuoY, ChenD, Isothermal section of Mg-Zn-Zr ternary system at 345 °C. Calphad. 2011;35:411–415. doi: 10.1016/j.calphad.2011.05.009
31.
GaoX, NieJF.Structure and thermal stability of primary intermetallic particles in an Mg-Zn casting alloy. Scr Mater. 2007;57:655–658. doi: 10.1016/j.scriptamat.2007.06.005
32.
YuanGY, KatoH, AmiyaK, Excellent creep properties of Mg-Zn-Cu-Gd-based alloy strengthened by quasicrystals and laves phases. J Mater Res. 2005;20:1278–1286. doi: 10.1557/JMR.2005.0156
33.
BuhaJ, OhkuboT.Natural aging in Mg-Zn(-Cu) alloys. Metall Mater Trans A. 2008;39A:2259–2273. doi: 10.1007/s11661-008-9545-y
34.
GhoshP, Mezbahul-IslamM, MedrajM.Critical assessment and thermodynamic modeling of Mg-Zn, Mg-Sn, Sn-Zn and Mg-Sn-Zn systems. Calphad. 2012;36:28–43. doi: 10.1016/j.calphad.2011.10.007
35.
Mezbahul-IslamM, KevorkovD, MedrajM.The equilibrium phase diagram of the magnesium-copper-yttrium system. J Chem Thermodyn. 2008;40:1064–1076. doi: 10.1016/j.jct.2008.03.004
36.
ZhangDF, QiFG, LanW, Effects of Ce addition on microstructure and mechanical properties of Mg-6Zn-1Mn alloy. Trans Nonferr Met Soc. 2011;21:703–710. doi: 10.1016/S1003-6326(11)60769-3
37.
NieJF.Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys. Scr Mater. 2003;48:1009–1015. doi: 10.1016/S1359-6462(02)00497-9
38.
BecerraA, PekguleryuzM.Effects of lithium, indium, and zinc on the lattice parameters of magnesium. J Mater Res. 2008;23:3379–3386. doi: 10.1557/JMR.2008.0414
