The present study aims to investigate the effect of grain refinement on strain hardening behaviour and fracture surface characteristics in 316LN austenitic stainless steel (ASS). The ASSs with varying grain sizes were obtained through 90% cold rolled reduction and subsequently phase reversion annealing treatment. The results showed that the grain refinement from coarse-grained (CG) structure to ultrafine-grained (UFG) structure increased the yield strength whilst maintaining a reasonable ductility. The strain hardening curves in all the samples were divided into three stages. The fractures in all the samples were ductile fracture with dimples. The subtle differences in the strain hardening behaviour and fracture surface characteristics among the samples with various grain sizes from CG structure to UFG structure were influenced by the deformation mechanisms of austenite.
MaE.Amorphization in mechanically driven material systems. Scr Mater. 2003;49(10):941–946. doi: 10.1016/S1359-6462(03)00477-9
2.
KochCC.Optimization of strength and ductility in nanocrystalline and ultrafine grained metals. Scr Mater. 2003;49(7):657–662. doi: 10.1016/S1359-6462(03)00394-4
3.
MisraRDK, NayakS, MaliSA, On the significance of nature of strain-induced martensite on phase reversion-induced nanograined/ultrafine-grained austenitic stainless steel. Metall Mater Trans A. 2010;41:3–12. doi: 10.1007/s11661-009-0072-2
4.
MisraRDK, ChallaVSA, VenkatsuryaPKC, Interplay between grain structure, deformation mechanisms and austenite stability in phase-reversion-induced nanograined/ultrafine-grained austenitic ferrous alloy. Acta Mater. 2015;84:339–348. doi: 10.1016/j.actamat.2014.10.038
5.
ChallaVSA, WanXL, SomaniMC, Strain hardening behavior of phase reversion-induced nanograined/ultrafine-grained (NG/UFG) austenitic stainless steel and relationship with grain size and deformation mechanism. Mater Sci Eng A. 2014;613:60–70. doi: 10.1016/j.msea.2014.06.065
6.
XuDM, LiGQ, WanXL, Deformation behavior of high yield strength-high ductility ultrafine-grained 316LN austenitic stainless steel. Mater Sci Eng A. 2017;688:407–415. doi: 10.1016/j.msea.2017.02.009
KiskoA, MisraRDK, TalonenJ, The influence of grain size on the strain-induced martensite formation in tensile straining of an austenitic 15Cr–9Mn–Ni–Cu stainless steel. Mater Sci Eng A. 2013;578:408–416. doi: 10.1016/j.msea.2013.04.107
9.
SomaniMC, JuntunenP, KarjalainenLP, Enhanced mechanical properties through reversion in metastable austenitic stainless steels. Metall Mater Trans A. 2009;40:729–744. doi: 10.1007/s11661-008-9723-y
10.
ChristianJW, MahajanS.Deformation twinning. Prog Mater Sci1995;39:1–157. doi: 10.1016/0079-6425(94)00007-7
11.
MisraRDK, WanXL, ChallaVSA, Relationship of grain size and deformation mechanism to the fracture behavior in high strength-high ductility nanostructured austenitic stainless steel. Mater Sci Eng A. 2015;626:41–50. doi: 10.1016/j.msea.2014.12.052
XuDM, LiGQ, WanXL, The effect of annealing on the microstructural evolution and mechanical properties in phase reversed 316LN austenitic stainless steels. Mater Sci Eng A. 2018;720:36–48. doi: 10.1016/j.msea.2018.02.018
14.
El-DanafE, KalidindiSR, DohertyRD.Influence of grain size and stacking-fault energy on deformation twinning in fcc metals. Metall Mater Trans A. 1999;30:1223–1233. doi: 10.1007/s11661-999-0272-9
15.
HamdiF, AsgariS.Evaluation of the role of deformation twinning in work hardening behavior of face-centered-cubic polycrystals. Metall Mater Trans A. 2008;39:294–303. doi: 10.1007/s11661-007-9356-6
16.
AllainS, ChateauJ-P, BouazizO, Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys. Mater Sci Eng A. 2004;387–389:158–162. doi: 10.1016/j.msea.2004.01.059
17.
BrofmanPJ, AnsellGS.On the effect of carbon on the stacking fault energy of austenitic stainless steels. Metall Trans1978;9A:879–880. doi: 10.1007/BF02649799
18.
MatsuokaY, IwasakiT, NakadaN.Effect of grain size on thermal and mechanical stability of austenite in metastable austenitic stainless steel. Iron Steel Inst Jpn.2013;53(7):1224–1230. doi: 10.2355/isijinternational.53.1224
19.
TakakiS, FukunagaK, SyarifJ.Effect of grain refinement on thermal stability of metastable austenitic steel. Mater Trans.2004;45(7):2245–2251. doi: 10.2320/matertrans.45.2245
20.
NoharaK, OnoY, OhashiN.Composition and grain size dependencies of strain-induced martensitic transformation in metastable austenitic stainless steels. Iron Steel Inst Jpn. 1977;63:772–782. doi: 10.2355/tetsutohagane1955.63.5_772
21.
BarbierD, GeyN, AllainS, Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions. Mater Sci Eng A. 2009;500:196–206. doi: 10.1016/j.msea.2008.09.031
22.
DingH, DingH, SongD, Strain hardening behavior of a TRIP/TWIP steel with 18.8% Mn. Mater Sci Eng A. 2011;528(3):868–873. doi: 10.1016/j.msea.2010.10.040
23.
ChallaVSA, WanXL, SomaniMC, Significance of interplay between austenite stability and deformation mechanisms in governing three-stage work hardening behavior of phase-reversion induced nanograined/ultrafine-grained (NG/UFG) stainless steels with high strength-high ductility combination. Scr Mater. 2014;86(10):60–63. doi: 10.1016/j.scriptamat.2014.05.010
24.
DiniG, NajafizadehA, UejiR, Tensile deformation behavior of high manganese austenitic steel: The role of grain size. Mater Des.2010;31:3395–3402. doi: 10.1016/j.matdes.2010.01.049
25.
CuiZQ, LiuBX.Principles of metallography and heat treatment [M]. Harbin Institute of Technology Press, 2004 (in Chinese).
26.
BandstraJP, KossDA, GeltmacherA, Modeling void coalescence during ductile fracture of a steel. Mater Sci Eng A. 2004;366:269–281. doi: 10.1016/j.msea.2003.08.018
27.
WenJ, HuangY, HuangKC, The modified Gurson model accounting for the void size effect. Int J Plasticity. 2005;21:381–395. doi: 10.1016/j.ijplas.2004.01.004
28.
ChristyS, PakHR, MeyersMA. In: MurrLE, StaudhammerKP, MeyersMA, editors. Metallurgical applications of shock-wave and high strain-rate phenomena. New York ( NY): Marcel Dekker; 1986. p. 835–863.
29.
ZurekK, MeyersMA. In: DavisonL, GradyDE, ShahinpoorM, editors. High-pressure shock compression of solids II. New York: Springer-Verlag; 1996. p. 25–70.
