Bulk Mg–3%Al alloy-based nanocomposites containing graphene nano-platelets (GNPs) were synthesised using the powder metallurgy technique incorporating energy efficient hybrid microwave sintering and hot extrusion. GNPs in amounts of 0.1, 0.3 and 0.5 wt-% were investigated as reinforcements. Microstructural characterisation accomplished using optical, scanning and transmission electron microscopy revealed the presence of minimal porosity (<1%), a uniform distribution of GNPs in the matrix and a reduced grain size as a result of the presence of GNPs. The results of mechanical property characterisation revealed an overall improvement in micro-hardness and compressive response, due to the presence of GNPs, with best results exhibited by the Mg–3Al/0.3% GNPs composite. The ductility under compressive loading for composite samples remained higher than 20%.
GuptaM, SharonNML.Magnesium composites, magnesium, magnesium alloys, and magnesium composites. New York ( NY, USA): John Wiley & Sons; 2011.
2.
KujurMS, MallickA, ManakariV, Significantly enhancing the ignition/compression/damping response of monolithic magnesium by addition of Sm2O3 nanoparticles. Metals (Basel). 2017;7:357. doi: 10.3390/met7090357
3.
MallickA, TunKS, VedantamS, Mechanical characteristics of pure Mg and a Mg/Y2O3 nanocomposite in the 25–250°C temperature range. J. Mater Sci. 2010;45:3058–3066. doi: 10.1007/s10853-010-4312-z
4.
GuptaM, ParandeG, ManakariV.An insight into high performance magnesium alloy/nano-metastable-syntactic composites, 17th Australian International Aerospace Congress: AIAC 2017, Engineers Australia, Royal Aeronautical Society; 2017. p. 270.
5.
MonazzahAH, BagheriR, ReihaniSS, Toughness enhancement in architecturally modified Al6061–5 vol.% SiCp laminated composites. Int J Damage Mech. 2015;24:245–262. doi: 10.1177/1056789514529984
6.
MonazzahAH, PouraliakbarH, BagheriR, Toughness behavior in roll-bonded laminates based on AA6061/SiCp composites. Mater Sci Eng: A. 2014;598:162–173. doi: 10.1016/j.msea.2014.01.014
7.
MavhunguS, AkinlabiE, OnitiriM, Aluminium matrix composites for industrial use: advances and trends. Procedia Manuf. 2017;7:178–182. doi: 10.1016/j.promfg.2016.12.045
8.
MonazzahAH, PouraliakbarH, JandaghiMR, Influence of interfacial adhesion on the damage tolerance of Al6061/SiCp laminated composites. Ceram Int. 2017;43:2632–2643. doi: 10.1016/j.ceramint.2016.11.074
9.
PouraliakbarH, NazariA, FataeiP, Predicting charpy impact energy of Al6061/SiCp laminated nanocomposites in crack divider and crack arrester forms. Ceram Int. 2013;39:6099–6106. doi: 10.1016/j.ceramint.2013.01.027
ZhengW, LiS-s, TangB, Microstructure and properties of Mg–Al binary alloys. China Foundry. 2006;3:270–274.
12.
NieK, DengK, WangX, Characterization and strengthening mechanism of SiC nanoparticles reinforced magnesium matrix composite fabricated by ultrasonic vibration assisted squeeze casting. J Mater Res. 2017;32:2609–2620. doi: 10.1557/jmr.2017.202
13.
EsmailyM, SvenssonJE, JohanssonL.Corrosion of magnesium–aluminum (Mg–Al) alloys – an interplay between Al content and CO2. Magnesium Technol.;2017. p. 397–403.
14.
GuptaM, WongWLE.Magnesium-based nanocomposites: lightweight materials of the future. Mater Charact. 2015;105:30–46. doi: 10.1016/j.matchar.2015.04.015
15.
TekumallaS, GuptaM.An insight into ignition factors and mechanisms of magnesium based materials: a review. Mater Des. 2017;113:84–98. doi: 10.1016/j.matdes.2016.09.103
16.
ParandeG, ManakariV, MeenashisundaramGK, Enhancing the tensile and ignition response of monolithic magnesium by reinforcing with silica nanoparticulates. J. Mater Res. 2017;32:2169–2178. doi: 10.1557/jmr.2017.194
17.
LeeC, WeiX, KysarJW, Measurement of the elastic properties and intrinsic strength of monolayer graphene. Science. 2008;321:385–388. doi: 10.1126/science.1157996
18.
BalandinAA, GhoshS, BaoW, Superior thermal conductivity of single-layer graphene. Nano Lett. 2008;8:902–907. doi: 10.1021/nl0731872
19.
BolotinKI, SikesK, JiangZ, Ultrahigh electron mobility in suspended graphene. Solid State Commun. 2008;146:351–355. doi: 10.1016/j.ssc.2008.02.024
20.
ShahilKM, BalandinAA.Thermal properties of graphene and multilayer graphene: applications in thermal interface materials. Solid State Commun. 2012;152:1331–1340. doi: 10.1016/j.ssc.2012.04.034
21.
GoyalV, BalandinAA.Thermal properties of the hybrid graphene-metal nano-micro-composites: applications in thermal interface materials. Appl Phys Lett. 2012;100:073113. doi: 10.1063/1.3687173
NovoselovKS, Fal′koVI, ColomboL, A roadmap for graphene. Nature. 2012;490:192–200. doi: 10.1038/nature11458
24.
BartolucciSF, ParasJ, RafieeMA, Graphene–aluminum nanocomposites. Mater Sci Eng A. 2011;528:7933–7937. doi: 10.1016/j.msea.2011.07.043
25.
RashadM, PanF, HuH, Enhanced tensile properties of magnesium composites reinforced with graphene nanoplatelets. Mater Sci Eng A. 2015;630:36–44. doi: 10.1016/j.msea.2015.02.002
26.
RashadM, PanF, TangA, Development of magnesium-graphene nanoplatelets composite. J Compos Mater. 2015;49:285–293. doi: 10.1177/0021998313518360
27.
NawatheS, WongW, GuptaM.Using microwaves to synthesize pure aluminum and metastable Al/Cu nanocomposites with superior properties. J. Mater Process Technol. 2009;209:4890–4895. doi: 10.1016/j.jmatprotec.2009.01.009
28.
WongWLE, GuptaM.Using microwave energy to synthesize light weight/energy saving magnesium based materials: a review. Technologies. 2015;3:1–18. doi: 10.3390/technologies3010001
29.
EtaatM, PouraliakbarH, KhalajG, Adhesion strength measurement of nickel layer on the iron-based P/M parts influenced by different surface pre-treatment operations. Measurement (Mahwah NJ). 2015;66:204–211.
30.
MatliPR, UbaidF, ShakoorRA, Improved properties of Al–Si3N4 nanocomposites fabricated through a microwave sintering and hot extrusion process. RSC Adv. 2017;7:34401–34410. doi: 10.1039/C7RA04148A
31.
ReddyMP, UbaidF, ShakoorR, Effect of reinforcement concentration on the properties of hot extruded Al–Al2O3 composites synthesized through microwave sintering process. Mater Sci Eng A. 2017;696:60–69. doi: 10.1016/j.msea.2017.04.064
32.
UbaidF, MatliPR, ShakoorRA, Using B4C nanoparticles to enhance thermal and mechanical response of aluminum. Materials (Basel). 2017;10:621. doi: 10.3390/ma10060621
33.
ReddyMP, ShakoorR, ParandeG, Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques. Progr Nat Sci Mater Intl. 2017;27:606–614. doi: 10.1016/j.pnsc.2017.08.015
34.
TunKS, WongWLE, NguyenQB, Tensile and compressive responses of ceramic and metallic nanoparticle reinforced Mg composites. Materials (Basel). 2013;6:1826–1839. doi: 10.3390/ma6051826
35.
ParandeG, ManakariV, MeenashisundaramGK, Enhancing the hardness/compression/damping response of magnesium by reinforcing with biocompatible silica nanoparticulates. Int J Mater Res. 2016;107:1091–1099. doi: 10.3139/146.111435
36.
PouraliakbarH, JandaghiMR, BaygiSJM, Microanalysis of crystallographic characteristics and structural transformations in SPDed Al–Mn–Si alloy by dual-straining. J Alloys Compd. 2017;696:1189–1198. doi: 10.1016/j.jallcom.2016.12.086
37.
JandaghiMR, PouraliakbarH, KhalajG, Study on the post-rolling direction of severely plastic deformed aluminum–manganese–silicon alloy. Arch Civil Mech Eng. 2016;16:876–887. doi: 10.1016/j.acme.2016.06.005
