High-performance aluminium matrix composite joints were fabricated using a new joining technology assisted by ultrasonic vibration. The performance of the joints was close to that of the parent materials. The microstructure and the mechanical performance were found to be systematically dependent on the volume fraction and the distribution of reinforcement particles in the bond region. The authors believe that this study can be generalised to the bonding of other ceramic-reinforced metal matrix composites.
SchuerchH.Prediction of compressive strength in uniaxial boron fiber-metal matrix composite materials. IAA J. 1966;4:102–106.
2.
IbrahimIA, MohamedFA, LaverniaEJ.Particulate reinforced metal matrix composites? A review. J Mater Sci. 1991;26:1137–1156. doi: 10.1007/BF00544448
3.
LloydDJ.Particle reinforced aluminium and magnesium matrix composites. Int Mater Rev. 1994;39:1–23. doi: 10.1179/imr.1994.39.1.1
4.
MiracleDB.Metal matrix composites – from science to technological significance. Compos Sci Technol. 2005;65:2526–2540. doi: 10.1016/j.compscitech.2005.05.027
5.
JaglinskiT, KochmannD, StoneD, Composite materials with viscoelastic stiffness greater than diamond. Science. 2007;315:620–622. doi: 10.1126/science.1135837
6.
EllisMBD.Joining of aluminium based metal matrix composites. Int Mater Rev. 1996;41:41–58. doi: 10.1179/imr.1996.41.2.41
7.
UreñaA, EscaleraMD, GilL.Influence of interface reactions on fracture mechanisms in TIG arc-welded aluminium matrix composites. Compos Sci Technol. 2000;60:613–622. doi: 10.1016/S0266-3538(99)00168-2
8.
DahotreNB, McCayMH, McCayTD, Pulse laser processing of a SiC/Al-alloy metal matrix composite. J Mater Res. 1991;6:514–529. doi: 10.1557/JMR.1991.0514
9.
LienertTJ, BrandonED, LippoldJC.Laser and electron beam welding of SiCp reinforced aluminum A-356 metal matrix composite. Scr Metall Mater. 1993;28:1341–1346. doi: 10.1016/0956-716X(93)90479-C
10.
WangHM, ChenYL, YuLG.‘In-situ’ weld-alloying/ laser beam welding of SiCp/6061Al MMC. Mater Sci Eng A. 2000;293:1–6. doi: 10.1016/S0921-5093(00)01249-1
11.
ShirzadiAA, WallachER.New approaches for transient liquid phase diffusion bonding of aluminium based metal matrix composites. Mater Sci Technol. 1997;13:135–142. doi: 10.1179/mst.1997.13.2.135
12.
ZhangXP, YeL, MaiYW, Investigation on diffusion bonding characteristics of SiC particulate reinforced aluminium metal matrix composites (Al/SiCp-MMC). Compos Pt A Appl Sci Manuf. 1999;30:1415–1421. doi: 10.1016/S1359-835X(99)00040-8
13.
MarzoliLM, StrombeckAV, Dos SantosJF, Friction stir welding of an AA6061/Al2O3/20p reinforced alloy. Compos Sci Technol. 2006;66:363–371. doi: 10.1016/j.compscitech.2005.04.048
14.
CeschiniL, BoromeiI, MinakG, Effect of friction stir welding on microstructure, tensile and fatigue properties of the AA7005/10vol.%Al2O3p composite. Compos Sci Technol. 2007;67:605–615. doi: 10.1016/j.compscitech.2006.07.029
15.
ZhaoWW, YanJC, YangW, Capillary filling process during ultrasonically brazing of aluminium matrix composites. Sci Technol Weld Join. 2008;13:66–69. doi: 10.1179/174329308X271742
16.
ZhangY, YanJC, WuQ.Ultrasonic brazing of high fraction volume of SiC particulate reinforced aluminium matrix composites. Mater Sci Technol. 2009;25:379–382. doi: 10.1179/174367507X247458
17.
ZhangY, YanJC, ChenXG, Ultrasonic dissolution of brazing of 55% SiCp/A356 composites. Trans Nonferrous Met Soc China. 2010;20:746–750. doi: 10.1016/S1003-6326(09)60208-9
18.
HuangJH, DongYL, WanY, Investigation on reactive diffusion bonding of SiCp/6063 MMC by using mixed powders as interlayers. J Mater Process Technol. 2007;190:312–316. doi: 10.1016/j.jmatprotec.2007.02.028
19.
NagaokaT, MorisadaY, FukusumiM, Joint strength of aluminum ultrasonic soldered under liquidus temperature of Sn–Zn hypereutectic solder. J Mater Process Technol. 2009;209:5054–5059. doi: 10.1016/j.jmatprotec.2009.02.003
20.
NagaokaT, MorisadaY, FukusumiM, Selection of soldering temperature for ultrasonic-assisted soldering of 5056 aluminum alloy using Zn–Al system solders. J Mater Process Technol. 2011;211:1534–1539. doi: 10.1016/j.jmatprotec.2011.04.004
21.
LiYX, LengXS, ChengS, Microstructure design and dissolution behavior between 2024 Al/Sn with the ultrasonic-associated soldering. Mater Des. 2012;40:427–432. doi: 10.1016/j.matdes.2012.04.002
22.
XiaoY, JiHJ, LiMY, Microstructure and joint properties of ultrasonically brazed Al alloy joints using a Zn–Al hypereutectic filler metal. Mater Des. 2013;47:717–724. doi: 10.1016/j.matdes.2013.01.004
23.
ChenXG, YanJC, RenSC, Microstructure and mechanical properties of Ti–6Al–4V/Al1060 joints by ultrasonic-assisted brazing in air. Mater Lett. 2013;95:197–200. doi: 10.1016/j.matlet.2012.12.105
24.
XiaoY, JiHJ, LiMY, Ultrasound-induced equiaxial flower-like CuZn5/Al composite microstructure formation in Al/Zn–Al/Cu joint. Mater Sci Eng A. 2014;594:135–139. doi: 10.1016/j.msea.2013.11.063
25.
ChenXG, XieRS, LaiZW, Ultrasonic-assisted brazing of Al–Ti dissimilar alloy by a filler metal with a large semi-solid temperature range. Mater Des. 2016;95:296–305. doi: 10.1016/j.matdes.2016.01.109
26.
YangY, LanJ, LiXC.Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy. Mater Sci Eng A. 2004;380:378–383. doi: 10.1016/j.msea.2004.03.073
27.
KongCY, SoarRC.Fabrication of metal–matrix composites and adaptive composites using ultrasonic consolidation process. Mater Sci Eng A. 2005;412:12–18. doi: 10.1016/j.msea.2005.08.041
28.
XuZW, YanJC, ChenW, Effect of ultrasonic vibration on the grain refinement and SiC particle distribution in Zn-based composite filler metal. Mater Lett. 2008;62:2615–2618. doi: 10.1016/j.matlet.2007.12.065
29.
ZahraA, ZahraCY, CiachR.Contribution to the study of the Al-Zn phase diagram. J Therm Anal. 1983;26:303–307. doi: 10.1007/BF01913216
30.
LloydDJ.Aspects of fracture in particulate reinforced metal matrix composites. Acta Metall Mater. 1991;39:59–71. doi: 10.1016/0956-7151(91)90328-X
31.
MortensenA, JinI.Solidification processing of metal matrix composites. Int Mater Rev. 1992;37:101–128. doi: 10.1179/imr.1992.37.1.101
