Herein, we investigated the effects of Sc and Sc–Zr on the microstructure and mechanical properties of Be–Al alloy, showing that Sc alloying resulted in Be grain refinement and reduced the secondary dendritic arm spacing (SDAS) of these grains by 1/3, whereas Sc–Zr alloying further decreased the SDAS to 7.5 µm and afforded equiaxed/cellular-like morphology with further refined Be grains. The above alloying resulted in the formation of intermetallic compounds (Be13Sc, Be13Zr, and Al3(Sc1–xZrx)), increasing the macrohardness of the Be–Al alloy, with the microhardness and elastic modulus of the Be phase increasing to a larger extent than those of Al. Importantly, Sc–Zr alloying resulted in better microstructure modification and mechanical reinforcement than Sc alloying.
GrensingFC, DonH.Mechanical and thermal properties of aluminum-beryllium alloy AM162. Advances in Powder Metallurgy and Particulate Materials; Seattle, Washington, USA, 14-17 May 1995: Metal Powder Industries Federation, 105 College Rd. East, Princeton, NJ 08540-6692, USA, 1995. 13.
2.
NardoneVC, GarosshenTJ.Evaluation of the tensile and fatigue behaviour of ingot metallurgy beryllium/aluminium alloys. J Mater Sci. 1997;32(15):3975–3985. doi: 10.1023/A:1018677102160
3.
BealsRS.Reduced beryllium casting aluminum alloy. United States patent US 2013/0216424 A1. 2013.
4.
MolchanovaLV, IlyushinbVN.Alloying of aluminum-beryllium alloys. Russ Metall. 2013;2013(1):84–86. doi: 10.1134/S0036029513010096
5.
FridlyanderI.High-modulus aluminum alloys with beryllium and magnesium. Metal Sci Heat Treat. 2003;45(9):348–350. doi: 10.1023/B:MSAT.0000009779.74294.0b
6.
XuH, WangJ, YangG.First-principles studies on alloying effect of Ag and Ni in Be-Al alloys. Foundry Technol. 2009;30(4):478–481.
7.
LuS, MiaoWH, ChenJ, Design optimization of cast Cu-Al-Be-B alloys for high damping capacity. China Foundry. 2004;(S1):6.
8.
MariàngelsJ, TeresaC, LluisM, Study of the order-disorder phase transitions in Cu-Al-Be shape memory alloys. Philos Mag A. 1997;75(5):1237–1250. doi: 10.1080/01418619708209854
9.
BelkahlaS, GueninG.Martensitic transformation and metallurgical study of low temperature Cu-Al-Be ternary alloy. Le Journal de Physique IV.1991;1(C4):C4-145–C4-150.
10.
CastroR, StanekP, ElliottK, Plasma spraying of beryllium and beryllium-aluminum-silver alloys. Los Alamos National Lab., NM (United States). Funding organisation: USDOE, Washington, DC (United States); 1993.
11.
WadsworthJ, PeltonAR, CrooksDD, Microstructural evaluation of rapidly solidified Al-Li-Be alloys. J Mater Sci. 1986;21(11):3850–3858. doi: 10.1007/BF02431621
12.
NiehTG, WadsworthJ.Mechanical properties of a rapidly solidified Al-10% Be-2% Li alloy at elevated temperatures. Scr Metall. 1987;21(3):355–359. doi: 10.1016/0036-9748(87)90228-6
13.
TannerLE, JacobsonLA, WallME.Formation and crystallization of amorphous phases in the Ti-Be-AI system. Mater Sci Eng. 1988;97:379–383. doi: 10.1016/0025-5416(88)90078-X
14.
YoudelisWV.Role of nucleation entropy in beryllium-enhanced grain refinement of Al-Ti alloys. Seventh International Light Metals Congress; 1981 June 22–26, Aluminium-Verlag GmbH, Konigsallee 30, 4000 Dusseldorf 1, West Germany, p. 108–109.
15.
CarrabineJA.Ternary AlMnBe 4 phases in commercially pure beryllium. J Nucl Mater. 1963;8(2):278–280. doi: 10.1016/0022-3115(63)90049-7
16.
ZupaničF, BončinaT, ŠuštaršičB, Microstructure of Al–Mn–Be melt-spun ribbons. Mater Charact. 2008;59:7. doi: 10.1016/j.matchar.2007.10.007
17.
JosteinR, NilsR.Scandium in aluminium alloys. Int Mater Rev. 2005;50(1):19–44. doi: 10.1179/174328005X14311
18.
RivaS, YusenkoKV, LaveryNP, The scandium effect in multicomponent alloys. Int Mater Rev. 2015: 26.
MolchanovaLV.Effect of scandium on the phase composition and mechanical properties of ABM-type alloys. Russ Metall. 2010;2010(9):815–818. doi: 10.1134/S0036029510090107
21.
RøysetJ, RyumN.Scandium in aluminium alloys. Int Mater Rev. 2005;50(1):19–44. doi: 10.1179/174328005X14311
22.
GoldsteinJI, NewburyDE, EchlinP, Scanning electron microscopy and X-ray microanalysis: a text for biologists, materials scienctists and geologists. New York ( NY): Plenum Press; 1981.
23.
OzT, KaraköseE, KeskinM.Impact of beryllium additions on thermal and mechanical properties of conventionally solidified and melt-spun Al–4.5 wt.%Mn–x wt.%Be (x = 0, 1, 3, 5) alloys. Mater Des. 2013;50:14. doi: 10.1016/j.matdes.2013.03.024
24.
VenkateswarluK, PathakL, RayA, Microstructure, tensile strength and wear behaviour of Al–Sc alloy. Mater Sci Eng: A. 2004;383(2):374–380. doi: 10.1016/j.msea.2004.05.075
25.
OliverWC, PharrGM.An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7(6):20. doi: 10.1557/JMR.1992.1564
CarterD, BourkeM.Neutron diffraction study of the deformation behavior of beryllium–aluminum composites. Acta Mater. 2000;48(11):2885–2900. doi: 10.1016/S1359-6454(00)00087-2
29.
KurzW, FisherDJ.Fundamentals of solidification, 3rd ed. Aedermannsdorf, Switzerland: Trans Tech Publications Ltd; 1989.
30.
MaD, XuW.NSC, On secondary dendrite arm coarsening in peritectic solidification. Mater Sci Eng A. 2005;390:11. doi: 10.1016/j.msea.2004.07.032
31.
KoddermannT, LudwigR, PaschekD.On the validity of Stokes–Einstein and Stokes–Einstein–Debye relations in ionic liquids and ionic-liquid mixtures. ChemPhysChem. 2008;9:8.
32.
BerminghamMJ, McDonaldSD, StJohnDH, Beryllium as a grain refiner in titanium alloys. J Alloys Compd. 2009;481(1):L20–L23. doi: 10.1016/j.jallcom.2009.03.016
