Steel base metal laps or welding electrode surfaces were coated using graphene suspensions with various concentrations, and then the steel plates were welded using the shielded metal arc welding process. Microstructural observations showed that the addition of graphene to the weldment significantly refines the microstructure and promotes the formation of fine acicular ferrite. The results of mechanical testing indicated that with lower concentrations of graphene in the weldment, both the strength and ductility improve, but the hardness remains unchanged in comparison to the unreinforced weld metal. However, reinforcing with a higher concentration of graphene gives rise to the significant enhancement of the hardness and strength without deterioration of the ductility.
Dorri MoghadamA, SchultzB, FergusonJB, Functional metal matrix composites: self-lubricating, self-healing, and nanocomposites-an outlook. J Miner Met Mater Soc. 2014;66:872–881. doi: 10.1007/s11837-014-0948-5
2.
FattahiM, NabhanniN, RashidkhaniE, A new technique for the strengthening of aluminum tungsten inert gas weld metals: using carbon nanotube/aluminum composite as a filler metal. Micron. 2013;54-55:28–35. doi: 10.1016/j.micron.2013.07.004
3.
Sabetghadam-IsfahaniA, AbbasiM, SharifiSMH, Microstructure and mechanical properties of carbon nanotubes/AZ31 magnesium composite gas tungsten arc welding filler rods fabricated by powder metallurgy. Diam Relat Mater. 2016;69:160–165. doi: 10.1016/j.diamond.2016.08.017
IzadiH, GerlichA.Distribution and stability of carbon nanotubes during multi-pass friction stir processing of carbon nanotube/aluminum composite. Carbon N Y. 2011;50:4744–4749. doi: 10.1016/j.carbon.2012.06.012
6.
MauryaR, KumarB, AriharanS, Effect of carbonaceous reinforcements on the mechanical and tribological properties of friction stir processed Al6061 alloy. Mater Des. 2016;98:155–166. doi: 10.1016/j.matdes.2016.03.021
7.
AsgharzadehH, SedighM.Synthesis and mechanical properties of Al matrix composites reinforced with few-layer graphene and graphene oxide. J Alloys Compd. 2017;728:47–62. doi: 10.1016/j.jallcom.2017.08.268
WangX, YangH, SongL, Morphology, mechanical and thermal properties of graphene-reinforced poly(butylene succinate) nanocomposites. Compos Sci Technol. 2011;72:1–6. doi: 10.1016/j.compscitech.2011.05.007
10.
AbdolhosseinzadehS, AsgharzadehH, KimH.Fast and fully-scalable synthesis of reduced graphene oxide. Sci Rep. 2015;5:192. doi: 10.1038/srep10160
11.
FattahiM, GholamiAR, EynalvandpourA, Improved microstructure and mechanical properties in gas tungsten arc welded aluminum joints by using graphene nanosheets/aluminum composite filler wires. Micron. 2014;64:20–27. doi: 10.1016/j.micron.2014.03.013
12.
Standard Test Methods for Tension Testing of Metallic Materials. ASTM E8/E8M-09. 2010.
13.
TanY, LuoH, ZhangH, Graphene nanoplatelet reinforced boron carbide composites with high electrical and thermal conductivity. J Eur Ceram Soc. 2016;36(11):2679–2687. doi: 10.1016/j.jeurceramsoc.2016.04.036
14.
BabuSS.The mechanism of acicular ferrite in weld deposits. Curr Opin Solid State Mater Sci. 2004;8:267–278. doi: 10.1016/j.cossms.2004.10.001
15.
ChenF, YingJ, WangY, Effect of graphene content on the microstructure and properties of copper matrix composites. Carbon N Y. 2016;96:836–842. doi: 10.1016/j.carbon.2015.10.023
16.
HuZ, TongG, LinD, Graphene-reinforced metal matrix nanocomposites -a review. Mater Sci Technol. 2016;32:930–953. doi: 10.1080/02670836.2015.1104018
17.
BartolucciSF, ParasJ, RafieeMA, Graphene– aluminum nanocomposites. Mater Sci Eng A. 2011;528:7933–7937. doi: 10.1016/j.msea.2011.07.043
18.
LinD, LiuC, ChengG.Single-layer graphene oxide reinforced metal matrix composites by laser sintering: microstructure and mechanical property enhancement. Acta Mater. 2014;80:183–193. doi: 10.1016/j.actamat.2014.07.038
19.
LinD, YeC, LiaoYL, Laser sintering of separated and uniformly distributed multiwall carbon nanotubes integrated iron nanocomposites. J Appl Phys. 2014;115:113513. doi: 10.1063/1.4869214
20.
ChuK, JiaC.Enhanced strength in bulk graphene-copper composites. Phys Status Solidi A. 2014;211:184–190. doi: 10.1002/pssa.201330051
21.
WangJ, LiZ, FanG, Reinforcement with graphene nanosheets in aluminum matrix composites. Scr Mater. 2012;66:594–597. doi: 10.1016/j.scriptamat.2012.01.012
22.
ZhaiW, ShiX, WangM, Grain refinement: a mechanism for graphene nanoplatelets to reduce friction and wear of Ni3Al matrix self-lubricating composites. Wear. 2014;310:33–40. doi: 10.1016/j.wear.2013.12.014
23.
WangK, WangY, FanZ, Preparation of graphene nanosheet/alumina composites by spark plasma sintering. Mater Res Bull. 2011;46:315–318. doi: 10.1016/j.materresbull.2010.11.005
24.
WangC, MisraRDK, ShiMH, Transformation behavior of a Ti-Zr deoxidized steel: microstructure and toughness of simulated coarse grain heat affected zone. Mater Sci Eng A. 2014;594:218–228. doi: 10.1016/j.msea.2013.11.028
25.
TakadaA, TerasakiH, KomizoY.Effect of aluminium content on acicular ferrite formation in low carbon steel weld metals. Sci Technol Welding Joining. 2013;18:91–97. doi: 10.1179/1362171812Y.0000000086
26.
WanXL, WuKM, HuangG, Toughness improvement by Cu addition in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Sci Technol Welding Joining. 2016;21:295–302. doi: 10.1080/13621718.2015.1104098
WanX, ZhouB, NuneKC, In-situ microscopy study of grain refinement in the simulated heat-affected zone of high-strength low-alloy steel by TiN particle. Sci Technol Welding Joining. 2017;22:343–352. doi: 10.1080/13621718.2016.1242210
29.
FattahiM, NabhaniN, HosseiniM, Effect of Ti-containing inclusions in the nucleation of acicular ferrite and mechanical properties of multipass weld metals. Micron. 2013;45:107–114. doi: 10.1016/j.micron.2012.11.004
30.
DabiriAR, Yousefi MojallalR, AhmadiE, Effect of ZrO2 nanoparticles on the impact properties of shielded metal arc welds. Mater Lett. 2015;158:325–328. doi: 10.1016/j.matlet.2015.05.159
31.
ByunJ-S, ShimJ-H, SuhJ-Y, Inoculated acicular ferrite microstructure and mechanical properties. Mater Sci Eng A. 2001;319-321:326–331. doi: 10.1016/S0921-5093(00)02014-1
32.
CostinW, LavigneO, KotousovA.A study on the relationship between microstructure and mechanical properties of acicular ferrite and upper bainite. Mater Sci Eng A. 2016;663:193–203. doi: 10.1016/j.msea.2016.03.103
33.
MagudeeswaranG, BalasubramanianV, BalasubramanianTS, Effect of welding consumables on tensile and impact properties of shielded metal arc welding welded high strength, quenched and tempered steel joints. Sci Technol Welding Joining. 2008;13:97–105. doi: 10.1179/174329307X249432
34.
El-GhazalyA, AnisG, SalemH.Effect of graphene addition on the mechanical and tribological behavior of nanostructural AA2124 self-lubricating metal matrix composite. Compos A Appl Sci Manuf. 2017;95:325–336. doi: 10.1016/j.compositesa.2017.02.006
35.
LiG, XiongB.Effects of graphene content on microstructures and tensile property of graphene-nanosheets/aluminum composites. J Alloys Compd. 2017;697:31–36. doi: 10.1016/j.jallcom.2016.12.147
36.
YoonD, SonY-W, CheongH.Negative thermal expansion coefficient of graphene measured by Raman spectroscopy. Nano Lett. 2011;11:3227–3231. doi: 10.1021/nl201488g
37.
BarsoumZ, BarsoumI.Residual stress effects on fatigue life of welded structures using LEFM. Eng Fail Anal. 2009;16:449–467. doi: 10.1016/j.engfailanal.2008.06.017
38.
RashadM, PanF, TangA, Effect of graphene nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method. Prog Nat Sci Mater Int. 2014;24:101–108. doi: 10.1016/j.pnsc.2014.03.012
39.
ZhangD, ZhanZ.Strengthening effect of graphene derivatives in copper matrix composites. J Alloys Compd. 2016;654:226–233. doi: 10.1016/j.jallcom.2015.09.013
NaveenK, Praveen KumarD, SaravananM.Experimental analysis to improve weldments quality and safety aspects by using modified fluxes in shielded metal arc welding process. Int J Innov Res Sci Eng Technol. 2016;5:8828–8835.
42.
JeonC-H, JeongY-H, SeoJ-J, Material properties of graphene/aluminum metal matrix composites fabricated by friction stir processing. Int J Prec Eng Manuf. 2014;15(6):1235–1239. doi: 10.1007/s12541-014-0462-2
43.
LiJL, XiongYC, WangXD, Microstructure and tensile properties of bulk nanostructured aluminum/graphene composites prepared via cryomilling. Mater Sci Eng A. 2015;626:400–405. doi: 10.1016/j.msea.2014.12.102
44.
YanSJ, DaiSL, ZhangXY, Investigating aluminum alloy reinforced by graphene nanoflakes. Mater Sci Eng A. 2014;612:440–444. doi: 10.1016/j.msea.2014.06.077
45.
RashadM, PanF, TangA, Effect of graphene nanoplatelets (GNPs) addition on strength and ductility of magnesium–titanium alloys. J Magnesium Alloy. 2013;1:242–248. doi: 10.1016/j.jma.2013.09.004
46.
RashadM, PanF, HuH, Enhanced tensile properties of magnesium composites reinforced with graphene nanoplatelets. Mater Sci Eng A. 2015;630:36–44. doi: 10.1016/j.msea.2015.02.002
47.
HuZ, TongG, LinD, Graphene-reinforced metal matrix nanocomposites – a review. Mater Sci Technol. 2016;32:930–953. doi: 10.1080/02670836.2015.1104018
