FeCrAl ODS (oxide dispersion strengthened) alloy with Zr addition was investigated with the main focus on the structure and composition of oxide particles. The results reveal that almost all the small particles (diameter <2 nm) were found to be consistent with trigonal δ-phase Y4Zr3O12, with cubic Y3Al5O12 (YAG) oxides occasionally detected. The large particles (>2 nm) were mainly identified as monoclinic Al2O3 oxides. A core/shell structure is found in slightly large oxide particles. Oxide cores are Al and O while shell regions are enriched in Y. This leads us a promising way to control the structure and size of the oxides and develop the high-performance FeCrAl ODS alloys.
XuHJ, LuZ, JiaCY, Influence of mechanical alloying time on morphology and properties of 15Cr-ODS steel powders. High Temp Mater Proc. 2016;35(5):473–477. doi: 10.1515/htmp-2014-0229
2.
KimuraA, KasadaR, IwataN, Development of Al added high-Cr ODS steels for fuel cladding of next generation nuclear systems. J Nucl Mater. 2011;417(1–3):176–179. doi: 10.1016/j.jnucmat.2010.12.300
3.
OdetteGR, AlingerMJ, WirthBD. Recent developments in irradiation-resistant steels. Annu Rev Mater Res. 2008;38:471–503. doi: 10.1146/annurev.matsci.38.060407.130315
4.
XuHJ, LuZ, JiaCY, Microstructure and mechanical property of 12Cr oxide dispersion strengthened steel. High Temp Mater Proc. 2016;35(3):321–325. doi: 10.1515/htmp-2014-0163
5.
XuHJ, LuZ, WangDM, Effect of zirconium addition on the microstructure and mechanical properties of 15Cr-ODS ferritic steels consolidated by hot isostatic pressing. Fusion Eng Des. 2017;114:33–39. doi: 10.1016/j.fusengdes.2016.11.011
6.
XuHJ, LuZ, WangDM, Microstructure refinement and strengthening mechanisms of a 9Cr oxide dispersion strengthened steel by zirconium addition. Nucl Eng Technol. 2017;49(1):178–188. doi: 10.1016/j.net.2017.01.002
7.
XuHJ, LuZ, WangDM, Microstructural evolution in a new Fe based ODS alloy processed by mechanical alloying. Nucl Mater Energy. 2016;7:1–4. doi: 10.1016/j.nme.2016.04.006
8.
TanL, RenX, AllenTR. Corrosion behavior of 9–12% Cr ferritic–martensitic steels in supercritical water. Corros Sci. 2010;52(4):1520–1528. doi: 10.1016/j.corsci.2009.12.032
9.
XiaYP, WangXP, ZhuangZ, Microstructure and oxidation properties of 16Cr–5Al–ODS steel prepared by sol–gel and spark plasma sintering methods. J Nucl Mater. 2013;432(1–3):198–204. doi: 10.1016/j.jnucmat.2012.07.039
10.
HsiungLL, FlussMJ, TumeySJ, Formation mechanism and the role of nanoparticles in Fe–Cr ODS steels developed for radiation tolerance. Phys Rev B. 2010;82(18):184103-1–184103-13. doi: 10.1103/PhysRevB.82.184103
11.
KlimiankouM, LindauR, MöslangA, TEM study of PM 2000 steel. Powder Metall. 2005;48(3):277–287. doi: 10.1179/174329005X64171
12.
Maruzen. Metal date book. Tokyo: The Japan Institute of Metals; 1984, p. 84.
13.
GaoR, ZhangT, WangXP, Effect of zirconium addition on the microstructure and mechanical properties of ODS ferritic steels containing aluminum. J Nucl Mater. 2014;444(1–3):462–468. doi: 10.1016/j.jnucmat.2013.10.038
14.
FurukawaT, OhtsukaS, InoueM, Super ODS steels R and D for fuel cladding of next generation nuclear system, 4; mechanical properties at elevated temperatures. Proceedings of the ICAPP 2009, Tokyo, Japan, 2009, article ID. 9221.
15.
YuCZ, OkaH, HashimotoN, Development of damage structure in 16Cr–4Al ODS steels during electron-irradiation. J Nucl Mater. 2011;417(1-3):286–288. doi: 10.1016/j.jnucmat.2011.02.037
16.
KishimotoH, KasadaR, KimuraA, Super ODS steels R and D for fuel cladding on next generation nuclear systems, 8; ion irradiation effects at elevated temperatures. Proceedings of the ICAPP 2009, Tokyo, Japan, 2009, article ID. 9219.
17.
ZhangCH, KimuraA, KasadaR, Characterization of the oxide particles in Al-added high-Cr ODS ferritic steels. J Nucl Mater. 2011;417(1–3):221–224. doi: 10.1016/j.jnucmat.2010.12.063
18.
XuHJ, LuZ, UkaiS, Evolution of Y2O3 and its influence on the microstructure and mechanical properties of FeCrAl ODS alloys. (to be published).
19.
UnocicKA, PintBA, HoelzerDT. Advanced TEM characterization of oxide nanoparticles in ODS Fe–12Cr–5Al alloys. J Mater Sci. 2016;51(20):9190–9206. doi: 10.1007/s10853-016-0111-5
20.
KlimenkovM, LindauR, MöslangA. New insights into the structure of ODS particles in the ODS-Eurofer alloy. J Nucl Mater. 2009;386–388:553–556. doi: 10.1016/j.jnucmat.2008.12.174
21.
de CastroV, MarquisEA, Lozano-PerezS, Stability of nanoscale secondary phases in an oxide dispersion strengthened Fe–12Cr alloy. Acta Mater. 2011;59(10):3927–3936. doi: 10.1016/j.actamat.2011.03.017
22.
HigginsMP, LiuCY, LuZ, Crossover from disordered to core–shell structures of nano-oxide Y2O3 dispersed particles in Fe. Appl Phys Lett. 2016;109(3):031911-1–031911-4. doi: 10.1063/1.4959776
23.
XuHJ, LuZ, UkaiS, Effects of annealing temperature on nanoscale particles in oxide dispersion strengthened Fe–15Cr alloy powders with Ti and Zr additions. J Alloy Compd. 2017;693:177–187. doi: 10.1016/j.jallcom.2016.09.133
24.
HsiungLL, FlussMJ, KimuraA. Structure of oxide nanoparticles in Fe–16Cr MA/ODS ferritic steel. Mater Lett. 2010;64(16):1782–1785. doi: 10.1016/j.matlet.2010.05.039
25.
ChingWY, XuYN. Nonscalability and nontransferability in the electronic properties of the Y–Al–O system. Phys Rev B. 1999;59(20):12815–12821. doi: 10.1103/PhysRevB.59.12815
