A model for recalescence has been established by integrating a model for the decomposition of austenite and one dealing with heat transfer with latent heat release taken into account. The effects of recalescence on each individual austenite transformation product have been studied. It was found that Widmanstätten ferrite and pearlite reactions are most affected. The calculated cooling curve, as affected by the recalescence, has also been verified with a commercial steel subjected to two different environment conditions.
BarrettWF. Historical note on recalescence. Nature. 1910;85:235–236. doi: 10.1038/085235e0
2.
BarrettWF. Historical note on recalescence. Nature. 1899;60:173. doi: 10.1038/060173b0
3.
BarrettWF. LXII. On certain remarkable molecular changes occurring in iron wire at a low red heat. Philos Mag Ser 4. 1873;46:472–478.
4.
YokotaT, MateoCG, BhadeshiaHKDH. Formation of nanostructured steels by phase transformation. Scr Mater. 2004;51:767–770. doi: 10.1016/j.scriptamat.2004.06.006
5.
BhadeshiaHKDH. 52nd hatfield memorial lecture large chunks of very strong steel. Mater Sci Technol. 2005;21:1293–1302. doi: 10.1179/174328405X63999
6.
ChenJ, BhadeshiaH, HaslerS, et al. Complete calculation of steel microstructure for strong alloys. Proc New Dev Metall Appl High Strength Steels, Buenos Aires. 2008;2:749–759.
7.
ChenJ. Modelling of simultaneous transformations in steels [Ph.D. thesis]. University of Cambridge; 2009.
8.
GuoL, RoelofsH, LembkeM, et al. Modelling of transition from upper to lower bainite in multi-component system. Mater Sci Technol. 2016. DOI:10.1080/02670836.2016.1221495.
9.
GuoL, RoelofsH, LembkeM, et al. Effect of manganese sulphide particle shape on the pinning of grain boundary. Mater Sci Technol. 2016. DOI:10.1080/02670836.2016.1258157.
10.
JonesSJ. Modelling inclusion potency and simultaneous transformation kinetics in steels [Ph.D. thesis]. University of Cambridge; 1996.
11.
JonesSJ, BhadeshiaHKDH. Competitive formation of inter-and intragranularly nucleated ferrite. Metall Mater Trans A. 1997;28:2005–2013. doi: 10.1007/s11661-997-0157-8
12.
JonesSJ, BhadeshiaHKDH. Kinetics of the simultaneous decomposition of austenite into several transformation products. Acta Mater. 1997;45:2911–2920. doi: 10.1016/S1359-6454(96)00392-8
BhadeshiaHKDH. Thermodynamic analysis of isothermal transformation diagrams. Metal Sci. 1982;16:159–166. doi: 10.1179/030634582790427217
15.
BhadeshiaHKDH. Diffusion of carbon in austenite. Metal Sci. 1981;15:477–480. doi: 10.1179/030634581790426525
16.
SillerR, McLellanR. The variation with composition of the diffusivity of carbon in austenite. Trans Met Soc AIME. 1969;245:697–700.
17.
BabuSS, BhadeshiaHKDH. Diffusion of carbon in substitutionally alloyed austenite. J Mater Sci Lett. 1995;14:314–316. doi: 10.1007/BF00592135
18.
KolmogorovAN. On statistical theory of metal crystallisation (Izvestiya Akad Nauk SSSR (Izvestia Academy of Science, USSR). Ser. Math.1937;3:335–360.
19.
JohnsonWA, MehlRF. Reaction kinetics in processes of nucleation and growth. Trans AIME. 1939;135:396–415.
20.
AvramiM. Kinetics of phase change. I. General theory. J Chem Phys. 1939;7:1103–1112. doi: 10.1063/1.1750380
21.
AvramiM. Kinetics of phase change. II. Transformation-time relations for random distribution of nuclei. J Chem Phys. 1940;8:212–224. doi: 10.1063/1.1750631
22.
AvramiM. Granulation, phase change, and microstructure kinetics of phase change. III. J Chem Phys. 1941;9:177–184. doi: 10.1063/1.1750872
23.
ChristianJW. Theory of transformations in metals and alloys, Part I. 3 ed. Oxford: Pergamon Press; 2003.
24.
RobsonJD, BhadeshiaHKDH. Modelling precipitation sequences in power plant steels: part I, kinetic theory. Mater Sci Technol. 1997;13:631–639. doi: 10.1179/mst.1997.13.8.631
25.
RobsonJD, BhadeshiaHKDH. Modelling precipitation sequences in power plant steels, Part 2: application of kinetic theory. Mater Sci Technol. 1997;28A:640–644. doi: 10.1179/mst.1997.13.8.640
26.
RobsonJD, BhadeshiaHKDH. Kinetics of precipitation in power plant steels. CALPHAD. 1996;20:447–460. doi: 10.1016/S0364-5916(97)00007-2
27.
BhadeshiaHKDH. Bainite in steels: theory and practice. 3rd ed. Leeds: Maney Publishing; 2015.
28.
ScheilkE. Anlaufzeit der austenitumwandlung. Archiv für das Eisenhüttenwesen. 1935;8:565–567. doi: 10.1002/srin.193500186
29.
KoistinenDP, MarburgerRE. A general equation prescribing the extent of the austenite-martensite transformation in pure iron–carbon alloys and plain carbon steels. Acta Metallurgica. 1959;7:59–60. doi: 10.1016/0001-6160(59)90170-1
30.
LienhardJH, LienhardJ. A heat transfer textbook. Cambridge (MA): Phlogiston Press; 2000.
31.
KaufmanL, CloughertyEV, WeissRJ. The lattice stability of metals – III. Iron. Acta Metall. 1963;11:323–335. doi: 10.1016/0001-6160(63)90157-3
32.
KaufmanL. Condensed state reactions at high pressures. In: Mueller WM, editor. Energetics in metallurgical phenomena, vol. III. New York: Gordon and Breach; 1967. p. 53.
33.
BhadeshiaHKDH. Bainite in steels. 2nd ed. London: Institute of Materials; 2001.
34.
LeeS-J, LeeY-K. Latent heat of martensitic transformation in a medium-carbon low-alloy steel. Scr Mater. 2009;60:1016–1019. doi: 10.1016/j.scriptamat.2009.02.042
35.
BrownD, RidleyN. Rates of nucleation and growth and interlamellar spacings of pearlite in a low-alloy eutectoid steel. J Iron Steel Inst. 1966;204:811–816.
36.
BrownD, RidleyN. Kinetics of the pearlite reaction in high-purity nickel eutectoid steels. J Iron Steel Inst. 1969;207:1232–1240.
37.
PanditAS, BhadeshiaHKDH. Mixed diffusion-controlled growth of pearlite in binary steel. Proc Roy Soc A. 2011;467:508–521. doi: 10.1098/rspa.2010.0210
38.
PanditAS, BhadeshiaHKDH. The growth of pearlite in ternary steels. Proc Roy Soc A. 2011;467:2948–2961. doi: 10.1098/rspa.2011.0165
39.
PanditAS, BhadeshiaHKDH. Divorced pearlite in steels. Proc Roy Soc A. 2012;468:2767–2778. doi: 10.1098/rspa.2012.0115
40.
PanditAS. Theory of the pearlite transformation in steels [Ph.D. thesis]. Pembroke Street, Cambridge CB2 3QZ: University of Cambridge, Department of Materials Science and metallurgy; 2011.
41.
SeoS-W. Pearlite growth rate in Fe-C binary and Fe-C-X ternary steels [Ph.D. thesis]. Pohang University of Science and Technology, Graduate Institute of Ferrous Technology; 2015.
42.
SeoS-W, BhadeshiaHKDH, SuhD-W. Pearlite growth rate in Fe-C and Fe-Mn-C steels. Mater Sci Technol. 2015;31:487–493. doi: 10.1179/1743284714Y.0000000641
43.
BodnarRL, HansenSS. Effects of Widmanstätten ferrite on the mechanical properties of a 0.2 pct C-0.7 pct Mn steel. Metall Mater Trans A. 1994;25:763–773. doi: 10.1007/BF02665453
44.
BodnarRL, HansenSS. Effects of austenite grain size and cooling rate on Widmanstätten ferrite formation in low-alloy steels. Metall Mater Trans A. 1994;25:665–675. doi: 10.1007/BF02665443
45.
YangH-S, BhadeshiaHKDH. Uncertainties in dilatometric determination of martensite start temperature. Mater Sci Technol. 2007;23:556–560. doi: 10.1179/174328407X176857
46.
HolmanJP. Heat transfer. New York: McGraw Hill; 2004.
