Addition of alloying elements usually moves eutectoid point to left whilst aluminium enhances eutectoid carbon content. The carbon expands lattice parameters of austenite. High aluminium addition in steels led to volume expansion at pearlite-to-austenite transformation since specific volume of austenite is larger than that of mother phases, which is proposed to determine the volume expansion or contraction. It has been proven by calculations based on thermodynamics as well as accurate experimental observations of dilatometry study.
Garcıa de AndrésC., CaballeroF., CapdevilaC. and AlvarezL.: ‘Application of dilatometric analysis to the study of solid–solid phase transformations in steels’, Mater. Charact., 2002, 48, (1), 101–111.
2.
BhadeshiaH. and HoneycombeR.: ‘Steels: microstructure and properties’, 2006, London, Butterworth-Heinemann.
3.
PawłowskiB.: ‘Dilatometric examination of continuously heated austenite formation in hypoeutectoid steels’, Journal of Achievements in Materials and Manufacturing Engineering, 2012, 54, (2), 185–193.
4.
YangH. S. and BhadeshiaH.: ‘Uncertainties in dilatometric determination of martensite start temperature’, Mater. Sci. Technol., 2007, 23, (5), 556–560.
5.
Garcıa de AndrésC., CaballeroF., CapdevilaC. and BhadeshiaH.: ‘Modelling of kinetics and dilatometric behavior of non-isothermal pearlite-to-austenite transformation in a eutectoid steel’, Scripta Mater., 1998, 39, (6), 791–796.
6.
Garcia-JuncedaA., CaballeroF., CapdevilaC. and De AndrésC. G.: ‘Determination of local carbon content in austenite during intercritical annealing of dual phase steels by PEELS analysis’, Scripta Mater., 2007, 57, (2), 89–92.
7.
CaballeroF., CapdevilaC. and AndrésC. G. D.: ‘Modelling of kinetics of austenite formation in steels with different initial microstructures’, ISIJ Int., 2001, 41, (10), 1093–1102.
8.
OninkM., BrakmanC., TichelaarF., MittemeijerE., Van der ZwaagS., RootJ. and KonyerN.: ‘The lattice-parameters of austenite and ferrite in Fe–C alloys as functions of carbon concentration and temperature’, Scripta Metallurgica Et Materialia, 1993, 29, (8), 1011–1016.
9.
KopT., SietsmaJ. and Van Der ZwaagS.: ‘Dilatometric analysis of phase transformations in hypo-eutectoid steels’, J. Mater. Sci., 2001, 36, (2), 519–526.
10.
JacquesP., FurnémontQ., LaniF., PardoenT. and DelannayF.: ‘Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing’, Acta Mater., 2007, 55, (11), 3681–3693.
11.
MakiJ., MahieuJ., De CoomanB. and ClaessensS.: ‘Galvanisability of silicon free CMnAl TRIP steels’, Mater. Sci. Technol., 2003, 19, (1), 125–131.
12.
RyuJ. H., ChunY. S., LeeC. S., BhadeshiaH. and SuhD. W.: ‘Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel’, Acta Mater., 2012, 60, (10), 4085–4092.
13.
YiH., LeeK. and BhadeshiaH.: ‘Extraordinary ductility in Al-bearing δ-TRIP steel’, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science, 2011, 467, (2125), 234–243.
14.
YiH., LeeK. and BhadeshiaH.: ‘Mechanical stabilisation of retained austenite in δ-TRIP steel’, Mat. Sci. Eng. A-Struct., 2011, 528, (18), 5900–5903.
YiH., RyuJ., BhadeshiaH., YenH. and YangJ.: ‘Low-alloy duplex, directly quenched transformation-induced plasticity steel’, Scripta Mater., 2011, 65, (7), 604–607.
17.
HowellR. A. and AkenD. C. V.: ‘A literature review of age hardening Fe–Mn–Al–C alloys’, Iron & Steel Technology, 2009, 6, 193–212.
18.
SuhD. W. and KimN. J.: ‘Low-density steels’, Scripta Mater., 2013, 68, (6), 337–338.
19.
ChenP. C., ChaoC. G. and LiuT. F.: ‘A novel high-strength, high-ductility and high-corrosion-resistance FeAlMnC low-density alloy’, Scripta Mater., 2013, 68, (6), 380–383.
20.
ParkK. T.: ‘Tensile deformation of low-density Fe–Mn–Al–C austenitic steels at ambient temperature’, Scripta Mater., 2013, 68, (6), 375–379.
21.
RanaR., LiuC. and RayR. K.: ‘Low-density low-carbon Fe–Al ferritic steels’, Scripta Mater., 2013, 68, (6), 354–359.
22.
YiH., ChenP., HouZ., HongN., CaiH., XuY., WuD. and WangG.: ‘A novel design: partitioning achieved by quenching and tempering (Q–T & P) in an aluminium-added low-density steel’, Scripta Mater., 2013, 68, (6), 370–374.
23.
DysonD. and HolmesB.: ‘Effect of alloying additions on the lattice parameter of austenite’, J. Iron Steel Inst., 1970, 208, (5), 469–474.
24.
McDermidJ., ZurobH. and BianY.: ‘Stability of retained austenite in high-Al, low-Si TRIP-assisted steels processed via continuous galvanizing heat treatments’, Metall. Mater. Trans. A, 2011, 42, (12), 3627–3637.
25.
YiH.: ‘Review on δ-transformation-induced plasticity (TRIP) steels with low density: the concept and current progress’, JOM, 2014, 66, (9), 1759–1769.
26.
YiH. L., GhoshS. K., LiuW. J., LeeK. Y. and BhadeshiaH. K. D. H.: ‘Non-equilibrium solidification and ferrite in δ-TRIP steel’, Mater. Sci. Technol., 2010, 26, (7), 817–823.
