Depth-dependent hardness variation of dimethylamine borane-reduced electroless Ni–5 wt-%B deposits has been examined using the nanoindentation technique. The deposits were characterised using ICP-OES, FESEM, XRD and DSC for evaluating the composition, morphology, structure and phase transformation behaviour, respectively. Coatings were also analysed for hardness and wear resistance. The surface of the as-plated deposit exhibits a typical nodular morphology. DSC traces show the presence of a single exothermic peak at 313°C conforming to its phase transformation. X-ray diffraction pattern of as-prepared deposit contains a mixture of amorphous and sharp microcrystalline nickel peaks. Heat-treated coating exhibits improved hardness and wear resistance. Depth-dependent nanohardness profile of as-deposited film neither obeys Nix–Gao nor the Lam–Chong model of indentation.
ParkerK.: ‘Hardness and wear resistance tests of electroless nickel deposits’,Plating, 1974, 61, 834–841.
9.
JohnsonC. E. and OgburnF.: ‘Nickel–phosphorus alloy coatings for wear resistance’, Proc. 23rd Meet. MFPG, Washington, DC, October 1975, 45–55.
10.
LiC. M. and TandonK. N.: ‘Wear performance and mechanisms of EN coating under reciprocating sliding conditions’, J. Mater. Sci., 1994, 29, 1462–1470. doi: 10.1007/BF00368910
11.
WasekarN. P. and SundararajanG.: ‘Sliding wear behavior of electrodeposited Ni–W alloy and hard chrome coatings’, Wear, 2015, 342, 340–348. doi: 10.1016/j.wear.2015.10.003
12.
FrancoM., ShaW., MalinovS. and LiuH.: ‘Micro-scale wear characteristics of electroless Ni–P/SiC composite coating under two different sliding conditions’, Wear, 2014, 317, (1), 254–264. doi: 10.1016/j.wear.2014.06.013
13.
CapelH., ShipwayP. H. and HarrisS. J.: ‘Sliding wear behaviour of electrodeposited cobalt–tungsten and cobalt–tungsten–iron alloys’, Wear, 2003, 255, (7), 917–923. doi: 10.1016/S0043-1648(03)00241-2
14.
DuncanR. N. and ArneyT. L.: ‘Operation and use of sodium-borohydride-reduced electroless nickel’, Plat. Surf. Finish., 1984, 71, 54.
15.
HaseebA. S. M. A., AlbersU. and BadeK.: ‘Friction and wear characteristics of electrodeposited nanocrystalline nickel–tungsten alloy films’, Wear, 2008, 264, (1), 106–112. doi: 10.1016/j.wear.2007.02.004
16.
SriramanK. R., Ganesh Sundara RamanS. and SeshadriS. K.: ‘Synthesis and evaluation of hardness and sliding wear resistance of electrodeposited nanocrystalline Ni–W alloys’, Mat. Sci. Eng. A-Struct., 2006, 418, (1), 303–311. doi: 10.1016/j.msea.2005.11.046
17.
VitryV., KantaA.-F. and DelaunoisF.: ‘Mechanical and wear characterization of electroless nickel–boron coatings’, Surf. Coat. Technol., 2011, 206, 1879–1885. doi: 10.1016/j.surfcoat.2011.08.008
18.
VitryV., DelaunoisF. and DumortierC.: ‘Mechanical properties and scratch test resistance of nickel–boron coated aluminium alloy after heat treatments’, Surf. Coat. Technol., 2008, 202, 3316–3324. doi: 10.1016/j.surfcoat.2007.12.001
19.
KrishnaveniK., Sankara NarayananT. S. N. and SeshadriS. K.: ‘Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance’, Surf. Coat. Technol., 2005, 190, 115–121. doi: 10.1016/j.surfcoat.2004.01.038
20.
VitryV., KantaA.-F., DilleJ. and DelaunoisF.: ‘Structural state of electroless nickel–boron deposits (5wt.% B): characterization by XRD and TEM’, Surf. Coat. Technol., 2012, 206, 3444–3449. doi: 10.1016/j.surfcoat.2012.02.003
21.
DuncanR. N.: ‘The properties of electroless nickel coatings reduced with boron compounds’, J. Appl. Surface Finish., 2006, 2, 133.
22.
DervosC. T., NovakovicJ. and VassiliouP.: ‘Vacuum heat treatment of electroless Ni–B coatings’, Mater. Lett., 2004, 58, 619–623. doi: 10.1016/S0167-577X(03)00581-0
23.
OliverW. C. and PharrG. M.: ‘An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiment’, J. Mater. Res., 1992, 7, 1564–1583. doi: 10.1557/JMR.1992.1564
24.
ZhangB., WangW. and ZhangG. P.: ‘Depth dependent hardness variation in Ni–P amorphous film under nanoindentation’, Mater. Sci. Technol., 2006, 22, 734–737. doi: 10.1179/026708306X81540
25.
MaZ. S., LongS. G., PanY. and ZhouY. C.: ‘Indentation depth dependence of the mechanical strength of Ni films’, J. Appl. Phys., 2008, 103, 043512–043516. doi: 10.1063/1.2885090
26.
ZhangT. Y. and XuW. H.: ‘Surface effects on nanoindentation’, J. Mater. Res., 2002, 17, 1715–1720. doi: 10.1557/JMR.2002.0254
27.
NixW. D. and GaoH.: ‘Indentation size effects in crystalline materials: a law for strain gradient plasticity’, J. Mech. Phys. Solids, 1998, 46, 411–425. doi: 10.1016/S0022-5096(97)00086-0
28.
Dominguez-RiosC., Hurtado-MaciasA., Torres-SanchezR., RamosM. A. and Gonzalez-HernandezJ.: ‘Measurement of mechanical properties of an electroless Ni−B coating using nanoindentation’, Ind. Eng. Chem. Res., 2012, 51, 7762–7768. doi: 10.1021/ie201760g
29.
LamD. C. C. and ChongA. C. M.: ‘Models and experiments on strain gradient hardening in metallic glass’, Mat. Sci. Eng. A-Struct., 2001, 318, 313–319. doi: 10.1016/S0921-5093(01)01329-6
30.
GaoH., HuangY., NixW. D. and HutchinsonJ. W.: ‘Mechanism-based strain gradient plasticity – I. Theory’, J Mech. Phys. Solids, 1999, 47, 1239–1263. doi: 10.1016/S0022-5096(98)00103-3
31.
HuangY. S., HwangQuK. C.LiM. and GaoH.: ‘A conventional theory of mechanism-based strain gradient plasticity’, Int. J. Plasticity, 2004, 20, 753–782. doi: 10.1016/j.ijplas.2003.08.002
32.
ChenB. H., HongL., MaY. and KoT. M.: ‘Effects of surfactants in an electroless nickel-plating bath on the properties of Ni−P alloy deposits’, Ind. Eng. Chem. Res., 2002, 41, 2668–2678. doi: 10.1021/ie0105831
33.
MatsuokaM. and HayashiT.: ‘Effect of thallium content on the physicochemical properties of electroless Ni–B alloys’, Bull. Univ. Osaka Prefect. Ser. A, Eng. Nat. Sci., 1983, 32, 19–25.
34.
GorbunovaK. M., IvanovM. V. and MoiseevV. P.: ‘Direct electroless plating of iron–boron on copper’, J. Electrochem. Soc., 1973, 120, 613–618. doi: 10.1149/1.2403514
35.
Sankara NarayananT. S. N. and SeshadriS. K.: ‘Formation and characterization of borohydride reduced electroless nickel deposits’, J. Alloy. Compd., 2004, 365, 197–205. doi: 10.1016/S0925-8388(03)00680-7
36.
KrishnaveniK., Sankara NarayananT. S. N. and SeshadriS. K.: ‘Electroless Ni–B and Ni–B–Si3N4 composite coatings – their role in surface engineering’, ISRS, December 20–22 2004, Chennai, India1–9.
37.
HuY.-J., WangT.-X., MengJ.-L. and RaoQ.-Y.: ‘Structure and phase transformation behaviour of electroless Ni–W–P on aluminium alloy’, J. Surf. Coat. Technol., 2006, 201, 988–992. doi: 10.1016/j.surfcoat.2006.01.012
38.
GuinierA.: ‘Theory and technique of radiocrystallography’, 3rd edn; 1964, Paris, Dunod.
39.
StatiaM. H., CastilloE. J., PuchiE. S., LewisD. B. and HintermannH. E.: ‘Wear performance and mechanism of electroless Ni–P coating’, Surf. Coat. Technol., 1996, 86/87, 598–602. doi: 10.1016/S0257-8972(96)03086-1
40.
O. Vingsbo and S. Hogmark: ‘Wear of Steels’, in ‘Fundamentals of Friction and Wear of Materials’, (ed. David A. Rigney), 373–408; 1981, Metals Park, Ohio, ASM.
41.
WrightW. J., SahaR. and NixW. D.: ‘Deformation mechanisms of the Zr40, Ti14, Ni10, Cu12, Be24 bulk metallic glass’, Mater. Trans., 2001, 42, 642–649. doi: 10.2320/matertrans.42.642
42.
JanaS., RamamurtyU., ChattopadhyayK. and KawamuraY.: ‘Subsurface deformation during Vickers indentation of bulk metallic glasses’, Mat. Sci. Eng. A-Struct., 2004, 375, 1191–1195. doi: 10.1016/j.msea.2003.10.068
