The AISI 316L type of stainless steel is a popular steel material, as it has excellent corrosion resistance in aqueous solutions at ambient temperatures. However, the application of the AISI 316L stainless steel is limited by its relatively low hardness and low wear resistance. In this study, the electroless Ni–B coating was deposited on the AISI 316L stainless steel, and its structural, tribological and corrosion properties were characterised. Microstructural analysis showed that the electroless Ni–B coating deposited on the AISI 316L steel substrate exhibited a typical cauliflower-like structure exhibits an amorphous growth. From this study, it may be concluded that this process cannot only improve the hardness and wear resistance of the 316L stainless steel, but can also provide cathodic protection without losing or sacrificing the original properties of the 316L stainless steel.
Hsu J-P. Influence of low-temperature carburization on fatigue crack growth of austenitic stainless steel 316L. Ms Thesis, Department of Material Science and Engineering, Case Western Reserve University, 2008, p.2.
3.
AgarwalaRCAgarwalaV. Electroless alloy/composite coatings: a review. Sadhana2003; 28: 475–493.
SaitoTSatoEMatsuokaM. Electroless deposition of Ni–B, Co–B and Ni–Co–B alloys using dimethylamineborane as a reducing agent. J Appl Electrochem1998; 28: 559–563.
6.
RaoQLBiGLuQH. Microstructure evolution of electroless Ni-B film during its depositing process. Appl Surf Sci2005; 240: 28–33.
7.
DuncanRNArneyTL. Operation and use of sodium-borohydride-reduced electroless nickel. Plat Surf Finish1984; 71: 49–54.
8.
DervosCTNovakovicJVassiliouP. Vacuum heat treatment of electroless Ni–B coatings. Mater Lett2004; 58: 619–623.
ZhangHZhangXJZhangYK. Structure and properties of electroless nickel–boron alloy. Plat Surf Finish1993; 80: 80–83.
13.
ContrerasALeónCJimenezO. Electrochemical behaviour and micro-structural characterisation of 1026 Ni B coated steel. Appl Surf Sci2006; 253: 592–599.
14.
ChowYMLauWMKarimZS. Surface properties and solder ability behaviour of nickel-phosphorus and nickel-boron deposited by electroless plating. Surf Interface Anal2001; 31: 321–327.
15.
OsakaTTakanoNKurokawaT. Characterisation of chemically-deposited NiB and NiWB thin films as a capping layer for ULSI application. Surf Coat Technol2003; 169: 124–127.
16.
TsukimuraMInoueHEzawaH. Ni-B electroless plating as cap layer for Ag multi-level metallisation. Mater Trans2002; 43: 1615–1620.
17.
BülbülF. Antibacterial activity of electroless Ni–B coating. Mater Sci Technol2011; 27: 1540–1546.
18.
KrishnaveniKNarayananSTSNSeshadriSK. Electrodeposited Ni–B coatings: formation and evaluation of hardness and wear resistance. Mater Chem Phys2006; 99: 300–308.
19.
AnikMKörpeEŞenE. Effect of coating bath composition on the properties of electroless nickel-boron films. Surf Coat Technol2006; 202: 1718–1727.
20.
NimmoJRPorosity and pore size distribution. In: HillelD (ed.) Encyclopedia of soils in the environment,2004; vol. 3., London: Academic Press, pp. 295–303.
21.
NarayananSTSNKrishnaveniKSeshadriSK. Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of micro-hardness, wear and corrosion resistance. Mater Chem Phys2003; 82(3): 771–779.
22.
VenkatakrishnanPGNazirudeenMSSNarayananSTSN. Electroless Ni-B-P ternary alloy coatings: preparation and evaluation of characteristic properties. Eur J Sci Res2012; 82: 506–514.
23.
VitryVDelaunoisFDumortierC. Mechanical properties and scratch test resistance of nickel–boron coated aluminium alloy after heat treatments. Surf Coat Technol2008; 202: 3316–3324.
24.
VitryVKantaAFDilleJ. Structural state of electroless nickel–boron deposits (5 wt.% B): characterization by XRD and TEM. Surf Coat Technol2012; 206: 3444–3449.
25.
KrishnaveniKNarayananSTSNSeshadriSK. Electroless Ni–B coatings, preparation and evaluation of hardness and wear resistance. Surf Coat Technol2005; 190: 115–121.
26.
WatanabeTTanabeY. Lattice images of amorphous-like Ni-B alloy films prepared by electroless plating method. Trans Jpn Inst Met1983; 24: 396–404.
27.
SrivastavaAMohanSAgarwalaV. The crystallisation behaviour of Ni-17.8 at. % B electroless deposit. Z Metallkd1992; 83: 254–257.
28.
EvansWTSchlesingerM. The effect of solution pH and heat treatment on the properties of electroless nickel boron films. J Electrochem Soc1994; 141: 78–82.
29.
VitryVKantAFDelaunoisF. Application of nitriding to electroless nickel–boron coatings: chemical and structural effects; mechanical characterization; corrosion resistance. Mater Des2011; 39: 269–278.
30.
VitryVSensAKantaAF. Wear and corrosion resistance of heat treated and as-plated Duplex NiP/NiB coatings on 2024 aluminum alloys. Surf Coat Technol2012; 206: 3421–3427.
31.
KayaBGulmezTDemirkolM. Preparation and properties of electroless Ni-B and Ni-B nanocomposite coatings. Proceedings of the world congress on engineering and computer science 2008 WCECS 2008. 21–24 October 2008. San Francisco, CA, USA1–5.
32.
DasSKSahooP. Wear performance optimization of electroless Ni-B coating using Taguchi design of experiments. Tribol Ind2010; 32: 17–27.
33.
TaylorSRCoatings for corrosion protection: metallic. In: BuschowKHJCahnRWFlemingsMC (eds). Encyclopedia of materials: science and technology, Oxford, UK: Elsevier (Pergamon), 2008, pp. 1269–1274.
34.
MercerA. Evaluation of metallic coatings as related to their corrosion-resistance-a review. Mater Chem1982; 7: 163–163.
