Sintering shrinkage of uniaxial cold compacted iron: Influence of the microstructure on the anisothermal and isothermal shrinkage of uniaxial cold-compacted iron
Restricted accessResearch articleFirst published online September, 2018
Sintering shrinkage of uniaxial cold compacted iron: Influence of the microstructure on the anisothermal and isothermal shrinkage of uniaxial cold-compacted iron
The influence of the microstructure of uniaxial cold-compacted green iron on the sintering shrinkage was investigated. Pores in the green parts are very slightly oriented, while the dimension of the interparticle contact areas is anisotropic. A large and anisotropic anisothermal shrinkage in alpha iron was measured, greater than isothermal shrinkage at the 1120°C. The results were interpreted on the basis of the geometrical and of the structural activity, and the effective diffusivity responsible for neck growth was determined.
OlevskyEA.Theory of sintering: from discrete to continuum. Mater Sci Eng Res. 1998;23:41–100. doi: 10.1016/S0927-796X(98)00009-6
2.
WakaiF, ShinodaY.Anisotropic sintering stress for sintering of particles arranged in orthotropic symmetry. Acta Mater. 2009;57:3955–3964. doi: 10.1016/j.actamat.2009.04.049
3.
WkaiF, AkatsuT.Anisotropic viscosities and shrinkage rate in sintering of particles in a simple orthorhombic structure. Acta Mater. 2010;58:1921–1929. doi: 10.1016/j.actamat.2009.11.035
4.
WakaiF, ChiharaK, YoshidaM.Anisotropic shrinkage due to particle rearrangement in sintering. Acta Mater. 2007;55:4553–4566. doi: 10.1016/j.actamat.2007.04.027
ZavaliangosA, MissiaenJM, BouvardD.Anisotropy in shrinkage during sintering. Sci Sintering. 2006;38:13–25. doi: 10.2298/SOS0601013Z
7.
VagnonA, LameO, BouvardD, . Deformation of steel powder compacts duirng sintering: correlation between macroscopic measurement and in situ microtomography analysis. Acta Mater. 2006;54:513–522. doi: 10.1016/j.actamat.2005.09.030
8.
KurokiH.Anisotropic springback and shrinkage of iron powder compact. Key Eng Mater. 1989;29:162–164.
9.
MolinariA, AmirabdollahianS, CristofoliniFM.Influence of powder deformation on anisotropy of sintering shrinkage. Adv Powder Metall Part Mater. 2016;1:45–52. compiled by C. Blais and J. Hamilton, MPIF, ISBN No. 978-1-943694-11-2.
10.
MolinariA, BisoffiE, MenapaceC, . Shrinkage kinetics during early stage sintering of cold isostatically compacted iron powder. Powder Metall. 2014;57(1):61–69. doi: 10.1179/1743290113Y.0000000068
11.
GermanRM.Sintering theory and practice. New York: Wiley; 1996.
12.
MolinariA, MenapaceC, TorresaniE, . Working hypothesis for origin of anisotropic sintering shrinkage caused by prior uniaxial cold compaction. Powder Metall. 2013;56(3):189–195. doi: 10.1179/1743290112Y.0000000043
13.
MolinariA, TorresaniE, MenapaceC, . The anisotropy of dimensional change on sintering of iron. J Am Ceram Soc. 2015;98(11):3431–3437. doi: 10.1111/jace.13852
14.
ShimaY, IshikawaY, NittaH, . Self-Diffusion along dislocations in ultra high purity iron. Mater Trans. 2002;43(2):173–177. doi: 10.2320/matertrans.43.173
15.
TorresaniE, CristofoliniI, MolinariA.Study of the anisotropic microstructure of the uniaxially cold compacted green parts. Adv Powder Metall Part Mater. 2015;3:9–18. compiled by S.R. Bingert and S.H. Luk, MPIF, ISBN No. 978-1-943694-01-3.
16.
BaselliS, MolinariA.Sintering shrinkage of uniaxial cold compacted iron. Part 1: a new shrinkage kinetic equation accounting for the microstructure of green parts. Submitted to Powder Metall.
17.
AmirabdollahianS, DeirminaF, MolinariA.Study of the pores characteristics in the uniaxially cold compacted green parts by Image Analysis, Proceedings World PM2016, Powder Metallurgy World Congress - Powder Pressing, (2016) ISBN: 978-1-899072-4-2.
18.
FriedrichE, SchattW.Sintering of one-component model systems: nucleation and movement of dislocations in necks. Powder Metall. 1980;4:193–197. doi: 10.1179/pom.1980.23.4.193
19.
FriedrichE.E, SchattW.Spannungsverteilung und Versetzungsvervielfachun in der Sinterkontaktregion. Acta Metall. 1983;31:121–128. doi: 10.1016/0001-6160(83)90071-8
20.
FriedrichE, SchattW.High temperature plasticity in solid phase sintering. Sci Sinter. 1983;5:63–71.
21.
TrzaskaZ, CouretA, MonchouxJP.Spark plasma sintering mechanisms at the necks between spherical TiAl powder particles. Acta Mater. 2016;118:100–108. doi: 10.1016/j.actamat.2016.07.043
