Sage Journals: Discover world-class research

Retricted access

Research article

First published 2021-3

Coefficient of friction and wear rate of paper-based composite friction material against 65Mn steel

Kingsford Koranteng, Heyan Li, Biao Ma [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2022-3

CFD modeling of slurry flow erosion wear rate through mitre pipe bend

Om Parkash, Arvind kumar, Basant Singh Sikarwar

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2021-8

Optimization of milling process parameters and prediction of abrasive wear rate increment based on cutting force experiment

Fei Li, Jun Liu

Advances in Mechanical Engineering

Retricted access

Research article

First published 2011-7

Estimation of wear rate on diamond beads during cutting with diamond wire by using multiple linear regression techniques

Y Ozcelik

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2000-3

Equilibrium of crack growth and wear rates during unlubricated rolling-sliding contact of pearlitic rail steel

D. I. Fletcher, J. H. Beynon

Proceedings of the Institution of Mechanical Engineers,Part F: Journal of Rail and Rapid Transit

Retricted access

Research article

First published 1998-1

Wear testing of hard coatings: More than wear rate?

J.-P. Celis, L. Stals, E. Vancoille [...]

Surface Engineering

Retricted access

Research article

First published 2025-2

Synergistic approach to wear rate forecasting in AZ31/5% Yttria stabilized zirconia reinforced composite through response surface methodology-genetic algorithm integration

Vignesh Packkirisamy, Arunkumar Thirugnanasambandam, Abhijit Bhowmik [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2010-1

Wear performance and mechanical properties of 80 wt-%Al 2 O 3 /20 wt-%YSZ cutting inserts at different sintering rates and soaking times

J. K. C. Hao, A. Z. A. Azhar, M. M. Ratnam [...]

Materials Science and Technology

Retricted access

Research article

First published 1983-05

Tooth Wear Rates Among Contemporary Australian Aborigines

S. Molnar, J.K. McKee, I.M. Molnar [...]

Journal of Dental Research

Retricted access

Research article

First published 2015-9

A comparison of wear rate of direct and indirect resin composites: A two-body wear abrasion test

Arzu Zeynep Yildirim Bicer, Duygu Karakis, Arife Dogan [...]

Journal of Composite Materials

Search results