Sage Journals: Discover world-class research

Retricted access

Research article

First published 2023-12

Pressure loss control in a rotor-stator cavity with inward throughflow

Xin Shen, Jun Liu, Pei Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Retricted access

Research article

First published 2022-1

Optimization of the hole exit shape of the vortex generator jets in a compressor cascade

Cong Chen, Fu Chen, Jianyang Yu

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Retricted access

Research article

First published 2019-5

Effect of the end-wall vortex generator jets on the performance of a high subsonic compressor cascade

Cong Chen, Huaping Liu, Fu Chen

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 1990-8

Measurements of three-dimensional flow using a multi-tube twin-wire resistance probe manometer

C.Y. Liu, B.C. Gooi

Transactions of the Institute of Measurement and Control

Retricted access

Research article

First published 2018-9

Flow control using unsteady pulsed holed suction with different excitation models in a highly loaded compressor cascade

Hongxin Zhang, Shaowen Chen, Yun Gong [...]

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 2015-12

Parametric studying of low-profile vortex generators flow control in an aggressive inter-turbine duct

Yanfeng Zhang, Xingen Lu, Zhijun Lei [...]

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 2010-2

Parametric study of tip cooling injection in an axial turbine cascade: Influences of injection circumferential angle

M Niu, S Zang

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 2021-6

Mechanisms of fuel injector tip wetting and tip drying based on experimental measurements of engine-out particulate emissions from gasoline direct-injection engines

M Medina, FM Alzahrani, M Fatouraie [...]

International Journal of Engine Research

Retricted access

Research article

First published 2020-8

Flow structures and thermal field with modulated jet near the semi-circular leading edge

S Sarkar

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 1968-11-1

Reduction of blade spindle torque by ventilation 1

L.A. van Gunsteren

International Shipbuilding Progress

Search results