Sage Journals: Discover world-class research

Free access

Research article

First published 2019-2

Adaptive on-line compensation model on positioning error of ball screw feed drive systems used in computerized numerical controlled machine tools

Tie-jun Li, Chun-yu Zhao, Yi-min Zhang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2009-7

Thermal—mechanical coupled simulation of a solid brake disc in repeated braking cycles

P Hwang, X Wu, Y B Jeon

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2025-9

Influence of solutal buoyancy on heat and mass transfer in mixed convection flow at constant thermal buoyancy: A 3D numerical study

Ranjit J. Singh, Hari Krishan Yadav, Yellakonda S. Kannan [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2009-8

A numerical study of the thermally induced stress distribution in a rotating hollow disc heated by a moving heat source acting on one of the side surfaces

M S Genç, G Özşik, H Yapicr

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2016-2

Analysis of the temperature of the rail/wheel contact surface using a half-space model and a moving heat source

Ferenc Kolonits

Proceedings of the Institution of Mechanical Engineers,Part F: Journal of Rail and Rapid Transit

Retricted access

Research article

First published 2011-11

Coupled thermopiezoelectric behaviour of a one-dimensional functionally graded piezoelectric medium based on C–T theory

A H Akbarzadeh, M H Babaei, Z T Chen

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2018-11

Combined numerical and experimental investigations of heat transfer of a highly loaded low-pressure turbine blade under periodic inlet flow condition

Ali Nikparto, Meinhard T Schobeiri

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 2006-6

Three-Dimensional Finite-Element Modelling of Deformation in Weld-Based Rapid Prototyping

M P Mughal, H Fawad, R A Mufti

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2013-6

Debris particle indentation and abrasion of machine-element contacts: An experimentally validated,thermoelastoplastic numerical model with micro-hardness and frictional heating effects

George K Nikas

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Free access

Research article

First published 2010-4

Thermomechanical finite element analysis and experimental investigation of single-pass single-sided submerged arc welding of C—Mn steel plates

P Biswas, N R Mandal

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results