Sage Journals: Discover world-class research

Retricted access

Research article

First published 2004-5

Turbulent thermohydrodynamic lubrication models compared with measurements

M Tanaka, K Hatakenaka

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2009-4

A thermohydrodynamic analysis of a lubrication film between rough seal faces

Z Luan, M M Khonsari

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2022-3

Three-dimensional thermohydrodynamic analysis of the effects of textured main bearing on lubricant density and viscosity in internal combustion engines

Anvar Ahmadkhah, Amir H Kakaee

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2023-7

Research on the thermohydrodynamic lubrication performance of engine main bearing with rough surface considering the axial motion and deformation of crankshaft

Biao Li, Jun Sun

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2002-5

Thermohydrodynamic performance of journal bearing with partial reverse flow and finger-type cavitation

K Hatakenaka, M Tanaka

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2005-4

Thermohydrodynamic Analysis for a Hydrodynamic Journal Bearing Groove

L Jeddi, M El Khlifi, D Bonneau

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2007-1

Thermohydrodynamic lubrication analysis for a dynamically loaded journal bearing

P Michaud, D Souchet, D Bonneau

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2000-5

Influence of geometric parameters and operating conditions on the thermohydrodynamic behaviour of plain journal bearings

I Pierre, M Fillon

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 1996-9

Thermohydrodynamic Performance of High-Speed Journal Bearings

T Makino, S Morohoshi, S Taniguchi

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2014-9

Thermohydrodynamic modelling of journal bearings under varying load angle and negative groove flow rate

FP Brito, AS Miranda, JCP Claro [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Search results