Sage Journals: Discover world-class research

Retricted access

Research article

First published 2014-2

Influence of wood machining on tensile shear strength and wood failure percentage of one-component polyurethane bonded wooden joints after wetting

O. Kläusler, K. Rehm, F. Elstermann [...]

International Wood Products Journal

Retricted access

Research article

First published 1995-05

An Accumulative Damage Model for Tensile and Shear Failures of Laminated Composite Plates

Iqbal Shahid, Fu-Kuo Chang

Journal of Composite Materials

Retricted access

Research article

First published 2010-10

Overload failure behaviour of dissimilar thickness resistance spot welds during tensile shear test

S. P. H. Marashi, M. Pouranvari, M. Salehi [...]

Materials Science and Technology

Retricted access

Research article

First published 2012-2

Failure of resistance spot welds: tensile shear versus coach peel loading conditions

M Pouranvari, S P H Marashi

Ironmaking & Steelmaking: Processes,Products and Applications

Open access

Research article

First published 2024

In-situ computed tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear test with clinch points

G Reschke, D Köhler, R Kupfer [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2023-10

Investigation of the effect of different welding parameters on tensile properties and failure modes of non-alloyed steel produced by powder metallurgy

Muhammed Elitas, Mehmet Akif Erden

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2010-8

Failure risk in powder-compacted parts

S A Rolland, D T Gethin, R W Lewis [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2023-8

Effects of welding parameters on tensile properties and failure modes of resistance spot welded DC01 steel

Muhammed Elitas

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2023-9

Consumable pin-friction stir spot welding of Al-Mg-Si alloy via pre-created hole and refilling: Microstructure evolution,defects,and shear/tensile failure load

Amir Baghdadchi, Mojtaba Movahedi

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2002-06

Parametric Study on the Failure of Fiber-Reinforced Composite Laminates under Biaxial Tensile Load

Wen-Pin Lin, Hsuan-Teh Hu

Journal of Composite Materials

Search results