Sage Journals: Discover world-class research

Retricted access

Review article

First published 2020-5

Analysis of misaligned hydrodynamic porous journal bearings in the steady-state condition with micropolar lubricant

Ujjal Baidya, Sanjoy Das, Santanu Das

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2019-12

Enhancement of steady state performance of hydrodynamic journal bearing using chevron-shaped surface texture

Sanjay Sharma, Gourav Jamwal, Rajeev K Awasthi

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2005-11

On the Steady-State Performance of Isotropically Rough Porous Hydrodynamic Journal Bearings of Finite Width with Slip-Flow Effect

R Haque, S K Guha

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2018-12

Analysis and comparison of steady-state performance characteristics of two-axial groove and multilobe hydrodynamic bearings lubricated with non-Newtonian fluids

Bhrigu Jyoti Das, Lintu Roy

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 1996-3

A Novel Variable Impedance Hydrodynamic Oil-Film Bearing: Part 2: Experimental Identification of the Steady State and Dynamic Characteristics

P J Ogrodnik, M J Goodwin, Y Fang [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2025

Research on steady state hydrodynamics and structural improvement of micro valves

Jilu Liu, Baoren Li, Gang Yang [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2015-4

An experimental analysis of the hydrodynamic contribution of textured thrust bearings during steady-state operation: A comparison with the untextured parallel surface configuration

Y Henry, J Bouyer, M Fillon

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2024

Research on vibration characteristics of cone valve based on steady state hydrodynamics

Jilu Liu, Gang Yang, Baoren Li [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2016-9

Determination of optimum configuration among different configurations of two-axial groove hydrodynamic bearings

Nithin M Joy, Lintu Roy

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Open access

Research article

First published 2017-11

Hydrodynamic calculation and analysis of a complex-shaped underwater robot based on computational fluid dynamics and prototype test

Zhandong Li, Jianguo Tao, Hao Sun [...]

Advances in Mechanical Engineering

Search results