Sage Journals: Discover world-class research

Retricted access

Research article

First published 2013-11

Pitting resistance of sintered small-module gears

Senad Dizdar

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2023-4

Influence of heat treatment and densification on the load capacity of sintered gears

Philipp Scholzen, Ali Rajaei, Jens Brimmers [...]

Powder Metallurgy

Retricted access

Research article

First published 2022-3

Comparison of the bending fatigue performances of selective laser sintered and injection moulded nylon spur gears

A Karthik Pandian, Sachin Singh Gautam, S Senthilvelan

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2017-4

Tooth root bending fatigue strength of small-module sinter-hardened spur gears

M. Benedetti, C. Menapace

Powder Metallurgy

Retricted access

Research article

First published 2007-6

Heat generation in Fe-C-Cu-MoS 2 -sintered spur gears under unlubricated conditions

S Dhanasekaran, R Gnanamoorthy

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2022-8

Effect of layer orientation on the single tooth bending fatigue strength of polymer gears manufactured by selective laser sintering

A. Karthik Pandian, Sachin Singh Gautam, S. Senthilvelan

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2023-2

Performance of selective laser sintered polyamide spur gear under dry and lubricated conditions

Sarita Bharti, Senthilvelan Selvaraj

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2018-6

The effect of elasticity in powder metal gears on tooth loading and mean coefficient of friction

Per Lindholm, Mario Sosa, Ulf Olofsson

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2025-10

Material testing for injection molded and 3D printed pristine/glass reinforced nylon at various strain rates

Mohit Jain, Santosh Patil

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2016-5

A comparative analysis of power density for single-stage and dual-stage magnetic gear with rare-earth magnets and non rare-earth magnets

Chan-Ho Kim, Sang-Yong Jung, Yong-Jae Kim

International Journal of Applied Electromagnetics and Mechanics

Search results