Sage Journals: Discover world-class research

Retricted access

Research article

First published 2025-7

Parameter identification and NVH characteristic analysis of automotive suspension rubber bushing

Hao Chen, Chihua Lu, Zhien Liu

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Open access

Research article

First published 2025-11

Lignin dispersion in polybutadiene rubber (BR) with different mixing parameters

Jukka Koskinen, Noora Kemppainen, Essi Sarlin

Progress in Rubber,Plastics and Recycling Technology

Retricted access

Review article

First published 2025-2

A unified stiffness model of rolling lobe air spring with nonlinear structural parameters and air pressure dependence of rubber bellows

Jun-Jie Chen, Zi-Qi Huang, Hong-Jiang Liu [...]

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Retricted access

Research article

First published 2012-3

Optimization of the processing parameters in melt blending of thermoplastic polyurethane and poly dimethyl siloxane rubber

Jineesh Ayippadath Gopi, Golok Bihari Nando

Journal of Elastomers & Plastics

Free access

Research article

First published 2004-1

Linear Temperature Programming Rheometers for the Cure of Rubbers. Effect of the Various Parameters

I.D. Rosca, R. Granger, J.M. Vergnaud

Polymers and Polymer Composites

Retricted access

Research article

First published 2017-7

Effect of processing parameters on the vulcanisation of natural rubber using glutaraldehyde

Ekwipoo Kalkornsurapranee, Wanida Yung-Aoon, Ladawan Songtipya [...]

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2013-11

Long-term life prediction of polyacrylate rubber (ACM) gasket with chlorine cure sites using the four-parameter recovery model

Hyung-Seok Lee, Cheol Kim, Young-Doo Kwon [...]

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Retricted access

Research article

First published 2007-10

Finite element-based parameter estimations for a characteristic simulation model of a hydraulically damped rubber mount for vehicle engines

L-R Wang, J-C Wang, Z-H Lu [...]

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Open access

Research article

First published 2020-3

Optimum parameters of a five-story building supported by lead-rubber bearings under near-fault ground motions

Qiang Rong

Journal of Low Frequency Noise,Vibration and Active Control

Retricted access

Research article

First published 2009-03

Activation Energy and Thermodynamic Parameters of Cyclization in Purified Natural Rubber Latex Using a Trimethyl Silyl Triflate

Sa-Ad Riyajan

Journal of Elastomers & Plastics

Search results