Sage Journals: Discover world-class research

Open access

Research article

First published 2016-10

Effect of shaft manufacturing bending deviation on dynamic response of geared rotor system

Dong Guo, Xiaohui Shi, Yawen Wang [...]

Advances in Mechanical Engineering

Retricted access

Research article

First published 2025-1

A general mathematical model for manufacturing Roots pump rotors using conical milling cutters

Van-Quyet Tran, Yu-Ren Wu

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2008-12

Design and Manufacturing of a Model-scale Active Twist Rotor Prototype Blade

Sang Joon Shin, Carlos E.S. Cesnik, W. Keats Wilkie [...]

Journal of Intelligent Material Systems and Structures

Retricted access

Research article

First published 2008-06

Design and Manufacture of a Composite Flywheel Press-Fit Multi-Rim Rotor

Sung K. Ha, Hoon H. Han, Young H. Han

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2019-7

Powder binders used for the manufacturing of wind turbine rotor blades. Part 2. Investigation of binder effects on the mechanical performance of glass fiber reinforced polymers

Stefan Schmidt, Thorsten Mahrholz, Alexandra Kühn [...]

Journal of Composite Materials

Retricted access

Research article

First published 2011-12

The effects of dimensional manufacturing tolerances on stability of a symmetric hydrodynamic journal bearing rotor system – an experimental investigation

P J Ogrodnik, W Xu, M J Goodwin [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2004-4

A mathematical model of a cc-type single-screw compressor

S-C Yang

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2004-05

Effects of Rotor Sizes and Epoxy System on the Process-Induced Residual Strains within Multi-Ring Composite Rotors

Sung K. Ha, Hyung T. Kim, Sang C. Han

Journal of Composite Materials

Retricted access

Research article

First published 1990-05

Effect of Denier-per-Filament of Polyester on Yarn Strength in Open-End Rotor Spinning

Peter V. Alston

Textile Research Journal

Retricted access

Research article

First published 1998-7

On gearing of helical screw compressor rotors

N Stošić

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results