Sage Journals: Discover world-class research

Open access

Review article

First published 2023-1

A review on the production of 17-4PH parts using press and sinter technology

Mohammed Qasim Kareem, Tamás Mikó, Gréta Gergely [...]

Science Progress

Retricted access

Research article

First published 2020-1

Microstructure and dielectric properties of hexagonal boron nitride prepared by hot pressing (uniaxial and isostatic) and by spark plasma sintering

Tatiani Falvo Almeida, Marcos Pereira Gonçalves, Ruth Herta Goldschmidt Aliaga Kiminami

Advances in Applied Ceramics: Structural,Functional and Bioceramics

Retricted access

Research article

First published 2004-9

New technological approach to fabrication of high density PM parts by cold pressing sintering

A.T. Mamedov, V.A. Mamedov

Powder Metallurgy

Retricted access

Research article

First published 2018-9

Effect of process parameters on the microstructure and mechanical properties of vacuum hot-press sintered Co-50 mass% Cr alloys

Shih-Hsien Chang, Chih-Yao Chang, Kuo-Tsung Huang [...]

Powder Metallurgy

Retricted access

Research article

First published 2016-11

Development of press-and-sinter Al2024-based nanocomposites reinforced with multiwalled carbon nanotubes

SE Shin, SM Moon, DY Lee [...]

Journal of Composite Materials

Retricted access

Research article

First published 2011-10

Characteristics of SiC f /SiC hybrid composites fabricated by hot pressing and spark plasma sintering

A Noviyanto, Y H Han, D H Yoon

Advances in Applied Ceramics: Structural,Functional and Bioceramics

Retricted access

Research article

First published 2022-4

Capsule-free hot isostatic pressing of sintered steel to full density using water atomised iron and Cr-alloyed powder consolidated by cold isostatic pressing

Maheswaran Vattur Sundaram, Eduard Hryha, Magnus Ahlfors [...]

Powder Metallurgy

Retricted access

Research article

First published 2018-4

Spark plasma sintering versus hot pressing – densification,bending strength,microstructure,and tribological properties of Ti5Al2.5Fe alloys

Ridvan Yamanoglu, Ismail Daoud, Eugene A. Olevsky

Powder Metallurgy

Retricted access

Research article

First published 2023-12

Influence of the initial powder characteristic on the densified tungsten microstructure by spark plasma sintering and hot isostatic pressing

Ji Young Kim, Eui Seon Lee, Youn Ji Heo [...]

Powder Metallurgy

Retricted access

Research article

First published 2025-4

Enhanced mechanical properties and wear resistance of Al–Cu–Mg alloy fabricated by press-and-sinter processing

Pengpeng Huang, Letian Wang, Zhongyue Yang [...]

Powder Metallurgy

Search results