Sage Journals: Discover world-class research

Retricted access

Research article

First published 2020-3

Carving a contemporary replica of the 1769 ‘Joseph Banks’ panel using pre-steel tools: reviving a traditional Māori carving technique

Wiremu T. Green (Ngāti Porou,Ngāti Wairere)

Journal of Material Culture

Retricted access

Research article

First published 2017-2

Ultrasound-assisted drilling of copper and pre-alloyed powder metallurgy steels

Bernard Tougas, Carl Blais

Powder Metallurgy

Retricted access

Meeting report

First published 1973-9

THE PREPARATION OF CARBIDE-ENRICHED TOOL STEELS BY POWDER METALLURGY *

F. Graham Wilson, P. W. Jackson

Powder Metallurgy

Retricted access

Research article

First published 2003-1

Investigation of fully dense laser sintering of tool steel powder using a pulsed Nd: Yag (neodymium-doped yttrium aluminium garnet) laser

W-N Su, P Erasenthiran, P M Dickens

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 1982-1

Production and Heat Treatment of Fully Dense Pressed and Sintered PM Tool Steels

P. Beiss, M. T. Podob

Powder Metallurgy

Retricted access

Research article

First published 2014-3

Analysis of friction,wear and oxidation behaviour of X40CrMoV5/Fe360B steel couple in an open-sliding contact

Z Baccouch, R Mnif, R Elleuch [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2024

Investigation on friction-stir welding of SS340 steel using a tungsten carbide based stirring tool

Selvam Ramasamy, Saravanan Paramasivam, Omprakasam Subramaniam [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2013-2

An experimental investigation for the improvement of attainable surface roughness during hard turning process

Waleed B Rashid, Saurav Goel, Xichun Luo [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2026

Machinability of FLC-4608 powder metallurgy steel compacts in cured green,pre-sintered and sinter-hardened states: A comparative analysis

Harshal Kulkarni, Vikram V Dabhade

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Review article

First published 2018-12

Bainite morphologies in sintered steels: Influence of materials and process conditions

G. Filippo Bocchini, Maria Rosa Pinasco, Maria Giuseppina Ienco [...]

Powder Metallurgy

Search results