Sage Journals: Discover world-class research

Retricted access

Research article

First published 2004-11

Effect of Post-mold Curing on Package Reliability

Manfred Mengel, Joachim Mahler, Wolfgang Schober

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2002-08

Effect of Injection Rate and Post-Fill Cure Pressure on Properties of Resin Transfer Molded Disks

Kristian A. Olivero, Harry J. Barraza, Edgar A. O’Rear [...]

Journal of Composite Materials

Retricted access

Research article

First published 2019-11

Microcellular thermoplastic polyurethanes and their flexible properties prepared by mold foaming process with supercritical CO 2

Xiulei Jiang, Ling Zhao, Lianfang Feng [...]

Journal of Cellular Plastics

Retricted access

Review article

First published 2023-6

Curing behavior and properties of ultra-high temperature resistant RTM bismaleimide resin

Xuhai Xiong, Jianxin Ai, Rong Ren [...]

High Performance Polymers

Retricted access

Research article

First published 2011-9

Cure kinetics and chemorheological behavior of a wind epoxy resin system and its viscoelastic properties reinforced by glass fiber matt with process of vacuum assisted resin transfer molding

Xiufang Wen, Xiaofei Wang, Zhi-Qi Cai [...]

High Performance Polymers

Retricted access

Research article

First published 2017-4

High-performance bismaleimide resins with low cure temperature for resin transfer molding process

Ping Liu, Chunyan Qu, Dezhi Wang [...]

High Performance Polymers

Retricted access

Research article

First published 2019-9

A new m -xylylene bismaleimide-based high performance resin for vacuum-assisted infusion and resin transfer molding

Sergey Evsyukov, Ronald Klomp-de Boer, HD Stenzenberger [...]

Journal of Composite Materials

Retricted access

Research article

First published 1996-11

The Magnetoviscoelastic Response of Elastomer Composites Consisting of Ferrous Particles Embedded in a Polymer Matrix

Mark R. Jolly, J. David Carlson, Beth C. Muñoz [...]

Journal of Intelligent Material Systems and Structures

Retricted access

Research article

First published 1996-05

Load Bearing Response of HR Molded Foam as a Function of Processing and Testing Parameters

K. D. Cavender, M. R. Kinkelaar

Journal of Cellular Plastics

Open access

Research article

First published 2023-3

Development and verification of a cure-dependent visco-thermo-elastic simulation model for predicting the process-induced surface waviness of continuous fiber reinforced thermosets

N. Lorenz, B. Gröger, M. Müller-Pabel [...]

Journal of Composite Materials

Search results