Sage Journals: Discover world-class research

Retricted access

Research article

First published 2011-8

In situ oil flow measurements in fired engine compared to one-dimensional lube circuit simulation

A Le Négrate, M El Fassi, G Cavallaro

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2010-4

An investigation into oil—gas two-phase leakage flow through micro gaps in oil-injected compressors

D Xin, J Feng, X Jia [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2003-6

Effects of process conditions on mixing between molten iron and slag in smelting reduction vessel via water model study

J.-M. Chou, M.-C. Chuang, M.-H. Yeh [...]

Ironmaking & Steelmaking: Processes,Products and Applications

Retricted access

Research article

First published 2008-6

Investigation of the oil—gas separation in a horizontal separator for oil-injected compressor units

J Feng, Y Chang, X Peng [...]

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 2009-9

Observation of cavitation inception in separating water flows through constricted channels

S Washio, S Fujiyoshi, S Takahashi

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2008-12

Research on elastohydrodynamic lubrication of a crankshaft bearing with a rough surface considering crankshaft deformation

J Sun, C-L Gui, Z-H Wang

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Retricted access

Research article

First published 2010-12

Analysis of the oil supply system of a high-pressure shell scroll compressor

H R Liu, Y Y Zhao, L Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 1999-5

A non-dimensional method to increase the accuracy of turbine flowmeters

M R Cuthbert, S B M Beck

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 1999-3

Static characteristics of a piston-type pilot relief valve

S Washio, Y Nakamura, Y Yu

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2013

Modeling and Analysis of a Semiactive Power-Assisted Unit Based on Hydraulic Accumulator

Ming Xu, Guojin Chen, Jing Ni [...]

Advances in Mechanical Engineering

Search results