Sage Journals: Discover world-class research

Free access

Research article

First published 1998-1

Influence of exit angle and tool nose geometry on burr formation in face milling operations

O Olvera, G Barrow

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2012-3

Measuring step geometry using the Nose-to-Nose method: Validity and repeatability

Daniel Johnson, Gary Sloan

WORK: A Journal of Prevention,Assessment & Rehabilitation

Retricted access

Research article

First published 2019-3

Minimum drag and heating 0.3-caliber projectile nose geometry

Semih M Ölçmen, Gary C Cheng, Richard Branam [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2018-8

Hypersonic flow past nose cones of different geometries: a comparative study

Ashish Narayan, S Narayanan, Rakesh Kumar

SIMULATION

Retricted access

Research article

First published 2026

A numerical study of the effect of the nose cone geometry on the performance of the centrifugal compressor in a micro-turbojet engine

Saswat Kumar Panda, Satyajit Panigrahy, Harsh Shah [...]

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Retricted access

Research article

First published 2017-5

Effect of projectile nose geometry on the critical velocity and failure of yarn subjected to transverse impact

Matthew Hudspeth, Jou-mei Chu, Emily Jewell [...]

Textile Research Journal

Retricted access

Research article

First published 2018-1

A numerical analysis of projectile nose geometry including sliding friction for penetration into geological targets

Semih M Ölçmen, Stanley E Jones, Ryan H Weiner

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2003-8

The effects of tool geometry change on shearing edge finish in fine-blanking of different materials

Y C Leung, L C Chan, C H Cheng [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2004-9

Mass loss and blunting during high-speed penetration

R N Davis, A M Neely, S E Jones

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2022

Static puncture resistance characteristics with various indenter nose shape geometry perforation of shear thickening fluid impregnated polypropylene fabric for soft armour application

Deepak SampathKumar, Thirumalaikumarasamy Duraisamy, Thirumal Pattabi [...]

Polymers and Polymer Composites

Search results