Sage Journals: Discover world-class research

Retricted access

Research article

First published 2017-4

Performance of turbulence and cavitation models in prediction of incipient and developed cavitation

Phoevos Koukouvinis, Homa Naseri, Manolis Gavaises

International Journal of Engine Research

Retricted access

Research article

First published 2013-12

Numerical and experimental study of cavitating flow through an axial inducer considering tip clearance

Rafael Campos-Amezcua, Sofiane Khelladi, Zdzislaw Mazur-Czerwiec [...]

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Open access

Research article

First published 2013

Numerical Predictions of the Incipient and Developed Interblade Vortex Lines of a Model Francis Turbine by Cavitation Calculations

Zhigang Zuo, Shuhong Liu, Demin Liu [...]

Advances in Mechanical Engineering

Retricted access

Research article

First published 2008-12

Flow in valve covered orifice nozzles with cylindrical and tapered holes and link to cavitation erosion and engine exhaust emissions

M Gavaises

International Journal of Engine Research

Retricted access

Research article

First published 2022-7

Issues related to the numerical simulation of herringbone grooved journal bearing including cavitation condition

NV Borse, MA Sawant, SP Chippa

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2025-6

Investigation of the enhanced cavitation model considering turbulence effects of fuel flow in the injector nozzle holes

Weilong Liu, Jianhui Zhao, Vladimir Markov [...]

International Journal of Engine Research

Retricted access

Research article

First published 2012-12

Simulating transient wear characteristics of journal bearings subjected to mixed friction

Dirk Bartel, Lars Bobach, Thomas Illner [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2020-1

Surface modification effects on lubricant temperature and floating valve plate motion in an axial piston pump

David Richardson, Farshid Sadeghi, Richard G Rateick [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2021-2

Tribological performance of textured parallel sliding contact under mixed lubrication condition by considering mass conservation condition and couple-stress parameter

Annadi Ramana Reddy, Syed Ismail

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2013-11

Modelling of micro-geometry in elastohydrodynamic lubrication: Low-pressure valleys considerations

GE Morales Espejel, A Félix Quiñonez, CJ Hooke

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Search results