Sage Journals: Discover world-class research

Retricted access

Research article

First published 2019-11

Computational fluid dynamics simulation of geared transmissions with injection lubrication

H Liu, F Link, T Lohner [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2025-12

Injection rate of cylinder lubrication oil in large two-stroke marine diesel engines using a common rail lubrication system

Bjørn Christian Dueholm, Jesper de Claville Christiansen, Benny Endelt [...]

International Journal of Engine Research

Retricted access

Research article

First published 2013-2

Experimental investigation of the impact of post-injection on emissions,combustion and lubricant dilution in a diesel engine with B20 fuel

Peng Ye, Bhaskar Prabhakar, André L Boehman

International Journal of Engine Research

Retricted access

Research article

First published 2017-8

Effects of lubricant oil on particulate emissions from port-fuel and direct-injection spark-ignition engines

Riccardo Amirante, Elia Distaso, Michele Napolitano [...]

International Journal of Engine Research

Retricted access

Research article

First published 2018-4

Lubricant transport across the piston ring with flat and triangular lubrication injection profiles on the liner in large two-stroke marine diesel engines

H Overgaard, P Klit, A Vølund

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2025-10

Development of a high mechanical strength and self-lubricating composite via 2C-MIM – multi-material injection moulding of powders

Danieli Tartas, Artur Silverio Basso, Francisco Cavilha Neto [...]

Powder Metallurgy

Retricted access

Research article

First published 2017-6

Numerical and experimental analysis of fluid–fluid interaction and flow through micro clearance to estimate leakages in a fuel injection pump

Balasakthivel Kamaraj, Shankar C Subramanian, Baskaran Rakkiappan

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2023-7

Effect of direct injection and pivot stiffness on the static performance parameters of tilting pad journal bearings

Thales Freitas Peixoto, Felipe Wenzel da Silva Tuckmantel, Gregory Bregion Daniel [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2020-9

An experimental study for effect factors of the roller tappet induced impact noise in high-pressure fuel system of GDi engine

Hui-Min Shen, Pei Tang, Chong Lian [...]

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Free access

Case report

First published 2019-1

Improving machining performance of Ti-6Al-4V through multi-point minimum quantity lubrication method

Nilanjan Banerjee, Abhay Sharma

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results