Search results: Sage Journals

Open accessResearch articleFirst published August, 2021

Application of topological optimisation methodology to hydrodynamic thrust bearings

Kalle Kalliorinne, Roland Larsson, Andreas Almqvist

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published September, 2014

Large hydrodynamic thrust bearing: Comparison of the calculations and measurements

M Wodtke, A Schubert, M Fillon [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published December, 2025

Dynamic performance evaluation of hydrodynamic tapered-land thrust bearing

Anbara Lutfullaeva, Muhammad Ali, Isaiah Yasko [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published February, 2002

Laboratory research facility for testing hydrodynamic thrust bearings

S. B. Glavatskih

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published April, 2010

Influence of pad and runner mechanical deformations on the performance of a hydrodynamic fixed geometry thrust bearing

S A Ahmed, M Fillon, P Maspeyrot

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published May, 1998

The development of PTFE (polytetrafluoroethylene)-faced hydrodynamic thrust bearings for hydrogenerator application in the United Kingdom

J. E. L. Simmons, R. T. Knox, W. O. Moss

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published April, 2015

An experimental analysis of the hydrodynamic contribution of textured thrust bearings during steady-state operation: A comparison with the untextured parallel surface configuration

Y Henry, J Bouyer, M Fillon

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published November, 2025

Thermo-Elasto-Hydrodynamic lubrication analysis and optimization of water-lubricated thrust bearings with adaptively deformable pads

Gong Cheng, Fangxu Sun, Dong Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published June, 1956

The Hydrodynamic Pocket Thrust-Bearing

C. F. Kettleborough

Proceedings of the Institution of Mechanical Engineers

Restricted accessResearch articleFirst published June, 2013

On the modeling and shape optimization of hydrodynamic flexible-pad thrust bearings

M Fesanghary, MM Khonsari

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Open accessResearch articleFirst published August, 2021

Application of topological optimisation methodology to hydrodynamic thrust bearings

Kalle Kalliorinne, Roland Larsson, Andreas Almqvist

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published September, 2014

Large hydrodynamic thrust bearing: Comparison of the calculations and measurements

M Wodtke, A Schubert, M Fillon [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published December, 2025

Dynamic performance evaluation of hydrodynamic tapered-land thrust bearing

Anbara Lutfullaeva, Muhammad Ali, Isaiah Yasko [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published February, 2002

Laboratory research facility for testing hydrodynamic thrust bearings

S. B. Glavatskih

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published April, 2010

Influence of pad and runner mechanical deformations on the performance of a hydrodynamic fixed geometry thrust bearing

S A Ahmed, M Fillon, P Maspeyrot

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published May, 1998

The development of PTFE (polytetrafluoroethylene)-faced hydrodynamic thrust bearings for hydrogenerator application in the United Kingdom

J. E. L. Simmons, R. T. Knox, W. O. Moss

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published April, 2015

An experimental analysis of the hydrodynamic contribution of textured thrust bearings during steady-state operation: A comparison with the untextured parallel surface configuration

Y Henry, J Bouyer, M Fillon

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published November, 2025

Thermo-Elasto-Hydrodynamic lubrication analysis and optimization of water-lubricated thrust bearings with adaptively deformable pads

Gong Cheng, Fangxu Sun, Dong Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published June, 1956

The Hydrodynamic Pocket Thrust-Bearing

C. F. Kettleborough

Proceedings of the Institution of Mechanical Engineers

Restricted accessResearch articleFirst published June, 2013

On the modeling and shape optimization of hydrodynamic flexible-pad thrust bearings

M Fesanghary, MM Khonsari

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology