Sage Journals: Discover world-class research

Retricted access

Research article

First published 2023-5

Investigating hole effects on bending performance of aluminum beams with square cross-sections under three-point bending load and their implementation in light vehicles

Xianfei Shen, Musaddak Maher Abdul Zahra

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2008-12

Mutual Action Between MMCS Structure and Projectile After Ballistic Impact

M. Baki Karamiş, A. Alper Cerit, Fehmi Nair

Journal of Composite Materials

Retricted access

Research article

First published 2008-10

Gas dynamics analysis of an air pocket in the metal-stamping process

S-J Hwang, W-G Park, C Kim [...]

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Retricted access

Research article

First published 2000-5

Measurement and prediction of residual stresses in thick-section steel welds

D. J Smith, P J Bouchard, D George

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 2019-7

Experimental and numerical investigation of perforated cold-formed steel built-up I-section columns with web stiffeners and complex edge stiffeners

Chungang Wang, Qinglin Guo, Zhuangnan Zhang [...]

Advances in Structural Engineering

Retricted access

Research article

First published 2015-8

Experimental and Numerical Study on Perforated Channel Columns with Complex Edge Stiffeners and Web Stiffeners

Chungang Wang, Zhuangnan Zhang, Daqian Zhao [...]

Advances in Structural Engineering

Retricted access

Research article

First published 2024-10

Bending stresses in straight bars with a transverse centre hole: A case of beneficial notch effect?

Eugenio Dragoni

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2009-11

Research on plastic deformation behaviour and conditions for stepped hole ring rolling

L. Hua, D.-S. Qian, L.-B. Pan

Materials Science and Technology

Retricted access

Research article

First published 2008-09

Analysis of Abdominal Wounds Made by Surgical Trocars Using Functional Luminal Imaging Probe (FLIP) Technology

Barry P. McMahon, Deidre O'Donovan, Donghua Liao [...]

Surgical Innovation

Open access

Research article

First published 2012

Experimental Visualization of the Flow Structure for Jet in Crossflow with a Curved Hole Passage

Jun Yu Liang, Shun Kang

Advances in Mechanical Engineering

Search results