Sage Journals: Discover world-class research

Retricted access

Research article

First published 2019-11

A model approach for considering nonmetallic inclusions in the calculation of the local tooth root load-carrying capacity of high-strength gears made of high-quality steels

D Fuchs, S Schurer, T Tobie [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2016-4

Optimization of fillet stress to enhance the bending strength through non-standard high contact ratio spur gears

P Marimuthu, G Muthuveerappan

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2022-5

In-depth analysis of crack area characteristics of fisheye failures influenced by the multiaxial stress condition in the tooth root fillet of high-strength gears

Daniel Fuchs, Sascha Rommel, Thomas Tobie [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2007-1

Validation of a software tool for optimizing the design of low noise,high strength gears

J Haigh, D A Hofmann, R Bicker

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Retricted access

Research article

First published 2019-11

Investigations on the tooth root bending strength and the fatigue fracture characteristics of case-carburized and shot-peened gears of different sizes

KJ Winkler, S Schurer, T Tobie [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2019-1

Design principle and modeling method of asymmetric involute internal helical gears

Mo Shuai, Ma Shuai, Jin Guoguang [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2022-3

Comparison of the bending fatigue performances of selective laser sintered and injection moulded nylon spur gears

A Karthik Pandian, Sachin Singh Gautam, S Senthilvelan

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2024-2

Fully ceramic versus steel gears: Potential,feasibility and challenges

G Vasileiou, N Rogkas, A Markopoulos [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2018-7

Lubrication characteristics of gear after shot peening base on 25-pellet model

Shuai Mo, Shengping Zhu, Guoguang Jin [...]

Advances in Mechanical Engineering

Retricted access

News

First published 2005-3

Comparison of high performance PM gears manufactured by conventional and warm compaction and surface densification

Linnéa Fordén, Sven Bengtsson, Magnus Bergström

Powder Metallurgy

Search results