Sage Journals: Discover world-class research

Retricted access

Research article

First published 2001-2

Localization of plastic deformation during high strain rate torsion testing of rolled homogeneous armour

N A Fellows, J Harding

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 2003-7

High strain rate superplasticity of hot extruded and hot rolled AA 6013/20 vol.-%SiC p composite

L. Ceschini, A. Morri

Materials Science and Technology

Retricted access

Research article

First published 2021-9

Effects of Ga addition on the corrosion behaviours of high strain rate rolled Mg–Ga alloy sheets

Xiuxiu Yan, Jihua Chen, Hongge Yan [...]

Corrosion Engineering,Science and Technology: The International Journal of Corrosion Processes and Corrosion Control

Retricted access

Research article

First published 2025

Bake hardening behavior and microstructure evolution of hot-rolled high strength steel under different temperatures and pre-strain rates

Haowen Jiao, Tao Wang, Maojun Li [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2022-2

A computational investigation on the influence of the l/d ratio and strain rate on the deformation behavior of rolled and homogeneous armor steel in the split Hopkinson pressure bar test process

Ambuj Saxena, Shashi Prakash Dwivedi, Ashish K Srivastava [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2017-2

Elucidating white-etching matter through high-strain rate tensile testing

W. Solano-Alvarez, J. Duff, M. C. Smith [...]

Materials Science and Technology

Retricted access

Research article

First published 2022-12

Effects of Ga on microstructure and mechanical properties of HSRRed Mg–Zn–Zr alloys

Yang Nie, Hongge Yan, Jihua Chen [...]

Materials Science and Technology

Open access

Research article

First published 2019-1

Analysis of rate dependency on roll force calculation during hot strip rolling based on Karman equation

Xiawei Feng, Xiaochen Wang, Quan Yang [...]

Advances in Mechanical Engineering

Free access

Research article

First published 1997-4

Temperature changes in hot flat rolling of steels at low strain rates and low reduction

P O Aiyedun, L G M Sparling, C M Sellars

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025-7

Rolling forming behavior of ultra-thin lithium metal for battery anode

Chenghao Xie, Fangming Shen, Jian Zhou [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results