Sage Journals: Discover world-class research

Free access

Research article

First published 2010-8

Parametric finite-element studies on the effect of tool shape in friction stir welding

H Li, D Mackenzie, R Hamilton

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2012-6

Development of a new finite element and parametric study for plates with compressible constrained layer damping

Zhengchao Xie, W Steve Shepard

Journal of Composite Materials

Retricted access

Research article

First published 2017-12

Analytical and parametric study on masonry infilled reinforced concrete frames using finite element method

Sawsan MW Hammoudah, Muhammad Tariq A Chaudhary, Ahmed Sherif Essawy

Advances in Structural Engineering

Retricted access

Research article

First published 2013-11

Fracture of mobile unicompartmental knee bearings: A parametric finite element study

Elise C Pegg, David W Murray, Hemant G Pandit [...]

Proceedings of the Institution of Mechanical Engineers,Part H: Journal of Engineering in Medicine

Retricted access

Research article

First published 2022-3

Finite element parametric study of the split sleeve cold expansion on residual stresses and pulling force

Mithun K Dey, Dave Kim, Hua Tan

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2015-4

Temperature Distributions and Variations in Concrete Box-Girder Bridges: Experimental and Finite Element Parametric Studies

Nildem Tayşi, Sallal Abid

Advances in Structural Engineering

Free access

Research article

First published 2020-2

Parametric study on the tool inclination angle for side milling thin-walled workpiece edges based on finite element simulation

Gongyu Liu, Jiaqiang Dang, Chao Li [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2008-8

A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis

Y Zhang, K Chou

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2009-11

A finite element method parametric study of the dynamic response of the human brain with different cerebrospinal fluid constitutive properties

M Sotudeh Chafi, V Dirisala, G Karami [...]

Proceedings of the Institution of Mechanical Engineers,Part H: Journal of Engineering in Medicine

Retricted access

Research article

First published 2011-5

Finite-element-based parametric study on welding-induced distortion of TIG-welded stainless steel 304 sheets

A A Deshpande, L Xu, W Sun [...]

The Journal of Strain Analysis for Engineering Design

Search results