Search results: Sage Journals

Restricted accessResearch articleFirst published August, 2006

Study on the use of a non-circular gear train for the generation of Figure-8 patterns

J-Y Liu, S-L Chang, D Mundo

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published January 4, 2021

Iterated shape-bias graph cut with application to ellipse segmentation

Xin Sun, Dong Li, Wei Wang [...]

Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology

Restricted accessResearch articleFirst published September, 2020

Microstructure,mechanical properties,residual stresses and texture analysis of Ti-5Al-2.5Sn alloy weldments obtained using electron beam of different oscillation patterns

Asim Iltaf, Massab Junaid, Fahd N khan [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published December, 2019

Dynamic behaviors of a high-speed turbocharger rotor on elliptical floating-ring bearings

Congcong Zhang, Yongliang Wang, Rixiu Men [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published June, 2008

An anamorphic automobile headlamp design

Yuan Chang Liou

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Restricted accessResearch articleFirst published 2026

Effect of transient needle lifts on the internal flow and nozzle exit characteristics for elliptical gasoline direct injection nozzle

Yize Wang, Shenghao Yu, Jiao Wang [...]

International Journal of Engine Research

Restricted accessResearch articleFirst published January, 1993

Mutual Influence about Stress Concentration of Holes in Composite Plates

Hsien-Yang Yeh, Minh Duc Le

Journal of Reinforced Plastics and Composites

Restricted accessResearch articleFirst published January, 2023

Effects of circular and non-circular nozzle exit geometries on subsonic and supersonic jet propagations

Thillaikumar Thangaraj, Mrinal Kaushik, Thanigaiarasu S

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Restricted accessResearch articleFirst published November, 2010

Distributed Point Source Method for Modeling Scattered Ultrasonic Fields in the Presence of an Elliptical Cavity

Amit Shelke, Samik Das, Tribikram Kundu

Structural Health Monitoring

Restricted accessResearch articleFirst published September, 2005

Influence of beam oscillation patterns on the structure and mechanical properties of Ti–6Al–4V electron beam weldments

N. K. Babu, S. G. S. Raman, C. V. S. Murthy [...]

Science and Technology of Welding and Joining

Restricted accessResearch articleFirst published August, 2006

Study on the use of a non-circular gear train for the generation of Figure-8 patterns

J-Y Liu, S-L Chang, D Mundo

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published January 4, 2021

Iterated shape-bias graph cut with application to ellipse segmentation

Xin Sun, Dong Li, Wei Wang [...]

Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology

Restricted accessResearch articleFirst published September, 2020

Microstructure,mechanical properties,residual stresses and texture analysis of Ti-5Al-2.5Sn alloy weldments obtained using electron beam of different oscillation patterns

Asim Iltaf, Massab Junaid, Fahd N khan [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published December, 2019

Dynamic behaviors of a high-speed turbocharger rotor on elliptical floating-ring bearings

Congcong Zhang, Yongliang Wang, Rixiu Men [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published June, 2008

An anamorphic automobile headlamp design

Yuan Chang Liou

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Restricted accessResearch articleFirst published 2026

Effect of transient needle lifts on the internal flow and nozzle exit characteristics for elliptical gasoline direct injection nozzle

Yize Wang, Shenghao Yu, Jiao Wang [...]

International Journal of Engine Research

Restricted accessResearch articleFirst published January, 1993

Mutual Influence about Stress Concentration of Holes in Composite Plates

Hsien-Yang Yeh, Minh Duc Le

Journal of Reinforced Plastics and Composites

Restricted accessResearch articleFirst published January, 2023

Effects of circular and non-circular nozzle exit geometries on subsonic and supersonic jet propagations

Thillaikumar Thangaraj, Mrinal Kaushik, Thanigaiarasu S

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Restricted accessResearch articleFirst published November, 2010

Distributed Point Source Method for Modeling Scattered Ultrasonic Fields in the Presence of an Elliptical Cavity

Amit Shelke, Samik Das, Tribikram Kundu

Structural Health Monitoring

Restricted accessResearch articleFirst published September, 2005

Influence of beam oscillation patterns on the structure and mechanical properties of Ti–6Al–4V electron beam weldments

N. K. Babu, S. G. S. Raman, C. V. S. Murthy [...]

Science and Technology of Welding and Joining